Evaluation of antimicrobial effectiveness of pimaricin-loaded thermosensitive nanohydrogels in grape juice

Pimaricin-loaded poly(N-isopropylacrylamide) nanohydrogels with and without acrylic acid, were evaluated as food-spoilage inhibitors in a model system and a real food product: grape juice. Pimaricin was proposed as a non-allergenic alternative to sulphites for protecting juices against recontamination. However, pimaricin may degrade under conditions and treatments (heating, acidification, lighting) commonly applied in producing fresh juices. Nanohydrogel encapsulation may be a feasible procedure to avoid pimaricin degradation, improving its antimicrobial activity. Pimaricin-free nanohydrogels did not affect the growth of the indicator yeast either in the food model system or in grape juice. Conversely, pimaricin-loaded nanohydrogels effectively inhibited the growth of the indicator yeast. In some cases, the inhibition was extended even further than using free pimaricin. For instance, in the food model system, pimaricin-loaded nanohydrogels with acrylic acid (NPPNIPA-20AA(5)) prevented the yeast growth for more than 81 h while free pimaricin was only effective for 12 h. Despite pimaricin-loaded nanohydrogels without acrylic acid (NPPNIPA(5)) were able to reduce maximum yeast growth, as in all treatments with pimaricin, the extent of the inhibitory effect was not significantly (p>0.05) different to that achieved with free pimaricin. In grape juice, both free pimaricin and NPPNIPA-20AA(5) treatment completely inhibited the growth of the indicator yeast until the end of the bioassay. However, the latter provided similar inhibition levels using a smaller amount of pimaricin due to PNIPA-20AA(5) protection and its controlled release from the nanohydrogel. Therefore, nanohydrogel encapsulation may help to optimise antifungal treatments and decrease the incidence of food allergies.Funded by grant (MAT 2006-11662-CO3-CO2-C01/MAT 2010-21509-C03-01/EUI 2008-00115) from the “Ministerio de Educación y Ciencia” (Spain). Grant (SFRH/BPD/87910/2012) from the Fundação para a Ciência e Tecnologia (FCT, Portugal). Marie Curie COFUND Postdoctoral Research Fellow

Functional characterisation and antimicrobial efficiency assessment of smart nanohydrogels containing natamycin incorporated into polysaccharide-based films

The potential application of polysaccharide-based films containing smart nanohydrogels for the controlled release of food preservatives is demonstrated here. Smart active packaging is the most promising alternative to traditional packaging as it provides a controlled antimicrobial effect, which allows reducing the amount of preservatives in the food bulk, releasing them only on demand. This work evaluates the usefulness of smart thermosensitive poly(N-isopropylacrylamide) (PNIPA) nanohydrogels with or without acrylic acid (AA) incorporated into polysaccharide-based films (GA) to transport natamycin and release it as a response to environmental triggers. Release kinetics in liquid medium from GA films containing PNIPA/AA nanohydrogels (GA-PNIPA(5) and GA-PNIPA-20AA(5)) presented a characteristic feature regarding the films without nanohydrogels that was the appearance of a lag time in natamycin release, able to reach values of around 35 h. Another important feature of natamycin release kinetics was the fact that the release from GA-PNIPA/AA films only occurred when temperature was increased, so that the natamycin release was restricted to when there is a risk of growth of microorganisms that cause food spoilage or the development of pathogenic microorganisms. Additionally, it could be observed that the relative fraction of natamycin released from GA-PNIPA/AA films was significantly (p<0.05) higher than that released from GA films loaded with the same amount of free natamycin. It can be hypothesised that the encapsulation of natamycin into nanohydrogels helped it to be released from GA films, creating reservoirs of natamycin into the films and, therefore, facilitating its diffusion through the film matrix when the nanohydrogel collapses. In a solid medium, the low water availability limited natamycin release from GA-PNIPA/AA films restricting the on/off release mechanism of PNIPA/AA nanohydrogels and favouring the hydrophobic interactions between natamycin and polymer chains at high temperatures. Despite the low natamycin release in solid media, antimicrobial efficiency of GA-PNIPA(5) films containing natamycin in acidified agar plates was higher than that obtained with GA films without natamycin and GA films with free natamycin, probably due to the protecting effect against degradation when natamycin was included in the nanohydrogels, allowing its release only when the temperature increased.Clara Fucinos and Miguel A. Cerqueira are recipients of a fellowship (SFRH/BPD/87910/2012 and SFRH/BPD/72753/2010, respectively) from the Fundacao para a Ciencia e Tecnologia (FCT, POPH-QREN, and FSE Portugal). The authors thank the FCT Strategic Project PEst-OE/EQB/LA0023/2013 and the project "BioInd - Biotechnology and Bioengineering for improved Industrial and Agro-Food processes", Ref. NORTE-07-0124-FEDER-000028 co-funded by the Programa Operacional Regional do Norte (ON.2 - O Novo Norte), QREN, FEDER and the project from the "Ministerio de Educacion y Ciencia" (Spain) "Nanohidrogeles inteligentes sensibles a cambios de pH y Temperatura: Diseno, sintesis y aplicacion en terapia del cancer y el envasado activo de alimentos", Ref. MAT2010-21509-C03-01

Positive Interactions between Desert Granivores: Localized Facilitation of Harvester Ants by Kangaroo Rats

Facilitation, when one species enhances the environment or performance of another species, can be highly localized in space. While facilitation in plant communities has been intensely studied, the role of facilitation in shaping animal communities is less well understood. In the Chihuahuan Desert, both kangaroo rats and harvester ants depend on the abundant seeds of annual plants. Kangaroo rats, however, are hypothesized to facilitate harvester ants through soil disturbance and selective seed predation rather than competing with them. I used a spatially explicit approach to examine whether a positive or negative interaction exists between banner-tailed kangaroo rat (Dipodomys spectabilis) mounds and rough harvester ant (Pogonomyrmex rugosus) colonies. The presence of a scale-dependent interaction between mounds and colonies was tested by comparing fitted spatial point process models with and without interspecific effects. Also, the effect of proximity to a mound on colony mortality and spatial patterns of surviving colonies was examined. The spatial pattern of kangaroo rat mounds and harvester ant colonies was consistent with a positive interspecific interaction at small scales (<10 m). Mortality risk of vulnerable, recently founded harvester ant colonies was lower when located close to a kangaroo rat mound and proximity to a mound partly predicted the spatial pattern of surviving colonies. My findings support localized facilitation of harvester ants by kangaroo rats, likely mediated through ecosystem engineering and foraging effects on plant cover and composition. The scale-dependent effect of kangaroo rats on abiotic and biotic factors appears to result in greater founding and survivorship of young colonies near mounds. These results suggest that soil disturbance and foraging by rodents can have subtle impacts on the distribution and demography of other species

Manual Wheelchair Propulsion Patterns on Natural Surfaces During Start-Up Propulsion

Koontz AM, Roche BM, Collinger JL, Cooper RA, Boninger ML. Manual wheelchair propulsion patterns on natural surfaces during start-up propulsion. Objectives: To classify propulsion patterns over surfaces encountered in the natural environment during start-up and compare selected biomechanical variables between pattern types. Design: Case series. Setting: National Veterans Wheelchair Games, Minneapolis, MN, 2005. Participants: Manual wheelchair users (N=29). Intervention: Subjects pushed their wheelchairs from a resting position over high-pile carpet, over linoleum, and up a ramp with a 5° incline while propulsion kinematics and kinetics were recorded with a motion capture system and an instrumented wheel. Main Outcome Measures: Three raters classified the first 3 strokes as 1 of 4 types on each surface: arc, semicircular (SC), single looping over propulsion (SL), and double looping over propulsion (DL). The Fisher exact test was used to assess pattern changes between strokes and surface type. A multiple analysis of variance test was used to compare peak and average resultant force and moment about the hub, average wheel velocity, stroke frequency, contact angle, and distance traveled between stroke patterns. Results: SL was the most common pattern used during start-up propulsion (44.9%), followed by arc (35.9%), DL (14.1%), and SC (5.1%). Subjects who dropped their hands below the rim during recovery achieved faster velocities and covered greater distances (.016≤P≤.075) during start-up on linoleum and carpet and applied more force during start-up on the ramp compared with those who used an arc pattern (P=.066). Conclusions: Classifying propulsion patterns is a difficult task that should use multiple raters. In addition, propulsion patterns change during start-up, with an arc pattern most prevalent initially. The biomechanical findings in this study agree with current clinical guidelines that recommend training users to drop the hand below the pushrim during recovery. © 2009 American Congress of Rehabilitation Medicine

Comparison between overground and dynamometer manual wheelchair propulsion

Laboratory-based simulators afford many advantages for studying physiology and biomechanics; however, they may not perfectly mimic wheelchair propulsion over natural surfaces. The goal of this study was to compare kinetic and temporal parameters between propulsion overground on a tile surface and on a dynamometer. Twenty-four experienced manual wheelchair users propelled at a self-selected speed on smooth, level tile and a dynamometer while kinetic data were collected using an instrumented wheel. A Pearson correlation test was used to examine the relationship between propulsion variables obtained on the dynamometer and the overground condition. Ensemble resultant force and moment curves were compared using cross-correlation and qualitative analysis of curve shape. User biomechanics were correlated (R ranging from 0.41 to 0.83) between surfaces. Overall, findings suggest that although the dynamometer does not perfectly emulate overground propulsion, wheelchair users were consistent with the direction and amount of force applied, the time peak force was reached, push angle, and their stroke frequency between conditions. © 2012 Human Kinetics, Inc

Surface electromyography activity of trunk muscles during wheelchair propulsion

Background: Trunk instability due to paralysis can have adverse effects on posture and function in a wheelchair. The purpose of this study was to record trunk muscle recruitment patterns using surface electromyography from unimpaired individuals during wheelchair propulsion under various propulsion speed conditions to be able to design trunk muscle stimulation patterns for actual wheelchair users with spinal cord injury. Methods: Fourteen unimpaired subjects propelled a test wheelchair on a dynamometer system at two steady state speeds of 0.9 m/s and 1.8 m/s and acceleration from rest to their maximum speed. Lower back/abdominal surface electromyography and upper body movements were recorded for each trial. Based on the hand movement during propulsion, the propulsive cycle was further divided into five stages to describe the activation patterns. Findings: Both abdominal and back muscle groups revealed significantly higher activation at early push and pre-push stages when compared to the other three stages of the propulsion phase. With increasing propulsive speed, trunk muscles showed increased activation (P < 0.0001). Back muscle activity was significantly higher than abdominal muscle activity across the three speed conditions (P < 0.0005), with lower back muscles predominating. Interpretation: Abdominal and back muscle groups cocontracted at late recovery phase and early push phase to provide sufficient trunk stability to meet the demands of propulsion. This study provides an indication of the amount and duration of stimulation needed for a future application of electrical stimulation of the trunk musculature for persons with spinal cord injury. © 2006 Elsevier Ltd. All rights reserved

Validation of grayscale-based quantitative ultrasound in manual wheelchair users: Relationship to established clinical measures of shoulder pathology

OBJECTIVE: The primary aim of this study is to establish the validity of grayscale-based quantitative ultrasound (QUS) measures of the biceps and supraspinatus tendons. DESIGN: Nine QUS measures of the biceps and supraspinatus tendons were computed from ultrasound images collected from 67 manual wheelchair users. Shoulder pathology was measured using questionnaires, physical examination maneuvers, and a clinical ultrasound grading scale. RESULTS: Increased age, duration of wheelchair use, and body mass correlated with a darker and more homogenous tendon appearance. Subjects with pain during physical examination tests for biceps tenderness and acromioclavicular joint tenderness exhibited significantly different supraspinatus QUS values. Even when controlling for tendon depth, QUS measures of the biceps tendon differed significantly between subjects with healthy tendons, mild tendinosis, and severe tendinosis. Clinical grading of supraspinatus tendon health was correlated with QUS measures of the supraspinatus tendon. CONCLUSIONS: QUS is valid method to quantify tendinopathy and may allow for early detection of tendinosis. Manual wheelchair users are at a high risk for developing shoulder tendon pathology and may benefit from QUS-based research that focuses on identifying interventions designed to reduce this risk. Copyright © 2010 by Lippincott Williams & Wilkins