Asymmetric Dual Axis Energy Recovery Linac for Ultra-High Flux sources of coherent X-ray/THz radiation: Investigations Towards its Ultimate Performance

In order for sources of coherent high brightness and intensity THz and X-Ray radiation to be accepted by university or industrial R&D laboratories, truly compact, high current and efficient particle accelerators are required. The demand for compactness and efficiency can be satisfied by superconducting RF energy recovery linear accelerators (SRF ERL) allowing effectively minimising the footprint and maximising the efficiency of the system. However such set-ups are affected by regenerative beam-break up (BBU) instabilities which limit the beam current and may terminate the beam transport as well as energy recuperation. In this paper we suggest and discuss a SRF ERL with asymmetric configuration of resonantly coupled accelerating and decelerating cavities. In this type of SRF ERL an electron bunch is passing through accelerating and decelerating cavities once and, as we show in this case, the regenerative BBU instability can be minimised allowing high currents to be achieved. We study the BBU start current in such an asymmetric ERL via analytical and numerical models and discuss the properties of such a system

Studies of surface two-dimensional photonic band-gap structures

Two-dimensional (2D) surface photonic band-gap (SPBG) structures can be obtained by providing a shallow corrugation of the inner surface of a waveguide wall. It can be used as a distributed mirror, a cavity, or a filter in integrated optics or microwave electronics. These structures can also be an alternative to conventional 2D PBG or 1D Bragg structures. In this article, we present the results of theoretical and experimental studies of 2D SPBG structures. Data obtained from experiments are compared with theoretical results and good agreement between theory and experiment is demonstrated. Comparison of a coaxial 2D SPBG structure with a conventional 1D Bragg structure is also presented

GigaGauss solenoidal magnetic field inside bubbles excited in under-dense plasma

This paper proposes a novel and effective method for generating GigaGauss level, solenoidal quasi-static magnetic fields in under-dense plasma using screw-shaped high intensity laser pulses. This method produces large solenoidal fields that move with the driving laser pulse and are collinear with the accelerated electrons. This is in contrast with already known techniques which rely on interactions with over-dense or solid targets and generates radial or toroidal magnetic field localized at the stationary target. The solenoidal field is quasi-stationary in the reference frame of the laser pulse and can be used for guiding electron beams. It can also provide synchrotron radiation beam emittance cooling for laser-plasma accelerated electron and positron beams, opening up novel opportunities for designs of the light sources, free electron lasers, and high energy colliders based on laser plasma acceleration

Cylindrical, periodic surface lattice — theory, dispersion analysis, and experiment

A two-dimensional surface lattice of cylindrical topology obtained via perturbing the inner surface of a cylinder is considered. Periodic perturbations of the surface lead to observation of high-impedance, dielectric-like media and resonant coupling of surface and non-propagating volume fields. This allows synthesis of tailored-for-purpose "coating" material with dispersion suitable, for instance, to mediate a Cherenkov type interaction. An analytical model of the lattice is discussed and coupled-wave equations are derived. Variations of the lattice dispersive properties with variation of parameters are shown, illustrating the tailoring of the structure's electromagnetic properties. Experimental results are presented showing agreement with the theoretical model

Ecological and biological features of phacelia tanacetifolia benth. in various ecotopes of Southern European Russia

The article contains the results of the study of the environmental and biological features of Ph. tanacetifolia in four natural and territorial complexes of the Belgorod region. In all natural-territorial complexes Ph. tanacetifolia accompanied by dominant species such as: M. albus Medik., Ch. album L., E. canadensis L., E. repens (L.) Nevski, S. pumila (Poir.) Roem. & Schult., C. xanthiifolia (Nutt.

Scanning Probe Techniques for Characterization of Vertically Aligned Carbon Nanotubes

This chapter presents the results of experimental studies of the electrical, mechanical and geometric parameters of vertically aligned carbon nanotubes (VA CNTs) using scanning probe microscopy (SPM). This chapter also presents the features and difficulties of characterization of VA CNTs in different scanning modes of the SPM. Advanced techniques for VA CNT characterization (the height, Young’s modulus, resistivity, adhesion and piezoelectric response) taking into account the features of the SPM modes are described. The proposed techniques allow to overcome the difficulties associated with the vertical orientation and high aspect ratio of nanotubes in determining the electrical and mechanical parameters of the VA CNTs by standard methods. The results can be used in the development of diagnostic methods as well as in nanoelectronics and nanosystem devices based on vertically aligned carbon nanotubes (memory elements, adhesive structures, nanoelectromechanical switches, emission structures, etc.)

Карстоопасность территории архитектурно-этнографического музея «Хохловка»

Exogenous geologic processes (EGP) on the territory of Perm Krai have a wide development. In this list, karst occupies a special position, as this process is widespread and, in addition, can serve as a catalyst for associated hazardous geological processes. At the request of the management of the State Regional Budgetary Cultural Institution "Perm Regional Museum of History" the authors conducted a reconnaissance survey of karst occurrences in the territory of the architectural and ethnographic museum "Khokhlovka" to assess the geological risks and to ensure the safe operation of cultural heritage object, non-capital structures and engineering facilities. This article presents the results of preliminary assessment of karst hazard of the territory, based on the analysis of stock materials, remote sensing data and field reconnaissance survey.Экзогенные геологические процессы (ЭГП) на территории Пермского края имеют широкое развитие. В этом перечне карст занимает особое положение, так как этот процесс имеет широкое распространение и, кроме того, может служить катализатором сопутствующих опасных геологических процессов. По просьбе руководства Государственного краевого бюджетного учреждения культуры «Пермский краеведческий музей» авторами проведено рекогносцировочное обследование карстопроявлений территории архитектурно-этнографического музея «Хохловка» для оценки геологических рисков и обеспечения безопасной эксплуатации объектов культурного наследия, некапитальных сооружений и инженерных объектов. В данной статье приводятся результаты предварительной оценки карстоопасности территории, выполненные на основе анализа фондовых материалов, данных дистанционного зондирования Земли и полевого рекогносцировочного обследования

Periodic structure towards the terahertz region manufactured using high resolution 3D printing

Periodic structures used for high power millimetre and sub-millimetre sources that implement relativistic beam - wave interactions have historically involved the implantation of a dielectric layer around the inner wall of the interaction region or a periodic corrugated structure that serves to reduce the velocity of an internal electromagnetic wave. Moving towards the THz regime, the physical dimensions required to manufacture such a cavity become prohibitively difficult. Ongoing attempts to develop manufacturing processes that provide higher resolution have resulted in a number of viable techniques. Additive Manufacturing or 3D printing offers the possibility of producing components on this scale quickly and efficiently. Here 0.1, 0.4 and 1 THz periodic structures are realised using high resolution (16 micron) 3D printing technology

High-power free-electron Masers utilising 2D – 1D Bragg lasing cavities

We report the results from a coaxial 2D – 1D Bragg cavity based Free-Electron Maser, utilising a highcurrent (1.5kA), magnetically confined, thin annular electron beam with circumference of ~220mm, wall thickness of ~2mm and mean radius of ~35mm. The electron beam was transported through a 2m long coaxial drift-tube with inner and outer radii of 30 mm and 40mm respectively. Results obtained via numerical modelling and experimental observation are presented and compared