46 research outputs found
Physically Adjusted NDF: Integrating Forage Physical Form With Diet Complexity On The Farm
Physical form of forages and their neutral detergent fiber (NDF) content are crucial in ruminant diets for maintaining a healthy rumen and a productive animal. A challenge has been in taking the concept from its research base and applying it successfully in varied diets. A new system for physically adjusted NDF (paNDF) offers an option. It takes into account the forage, NDF, starch and other components in the diet and uses the Penn State Particle Separator on farm to assess total mixed ration particle size to provide recommendations on directions to move the diet to maintain a healthy rumen. This presentation will cover the paNDF system and how it can be applied on for diet formulation
Optimizing the use of fibrous residues in beef and dairy diets
Increased corn prices over the past decade have altered land use away from traditional forage in favor of corn. Accordingly, beef and dairy producers have had to adopt non-traditional forage resources into their production systems, many of which have become available as a result of increased corn production. Byproducts of the wet and dry milling industries have been used to replace both corn and forage in beef and dairy diets. Byproducts containing corn bran have large amounts of readily digestible hemicellulose. The use of byproducts may increase milk production, ADG, and G:F in dairy, beef growing, and beef finishing diets, respectively. In beef finishing diets, byproducts allow for use of low quality forages or partial replacement of traditional forages with minimal losses in ADG or G:F by formulating for equal NDF concentrations. Corn residues have become more available due to increases in corn acres and yield. The individual plant components (i.e., husk, leaf, stem) vary in fiber digestibility (NDF digestibility estimates = 40.5%, 31.4%, and 0.6% ± 0.8 for husk, leaf, and stalk, respectively). Selectivity for husks and leaves by grazing cattle likely improves their performance. New technologies that allow for selective harvesting of husk and leaf may result in a higher value feed product. Alkaline treatment is another technology that may improve the feeding value of residues. Concentrations of up to 20% harvested corn residue treated with calcium oxide may be included in finishing diets with an average of 2.3% reduction in G:F when diets contain 40% wet or modified distillers grains. Conversely, when untreated corn residues are included in similar finishing diets, G:F may be reduced by 20%. Calcium oxide treated residues included in beef growing diets increases DMI and ADG without significant improvements in G:F. Calcium oxide treatment of corn residues has been evaluated in dairy diets by replacing corn or corn silage with variable results. Harvesting corn silage rather than separate harvest of corn grain and residue may allow for greater total net energy per acre to be captured. The use of wet and modified corn milling byproducts enhances the use of corn silage in finishing diets. While G:F may be reduced, feeding greater concentrations of corn silage may be economical. Efficient use of non-traditional fiber sources, like corn milling by products and corn residue, are critical to the future viability of ruminant animal production
Relationship between urinary energy and urinary nitrogen or carbon excretion in lactating Jersey cows
Measurement of urinary energy (UE) excretion is essential to determine metabolizable energy (ME) supply. Our objectives were to evaluate the accuracy of using urinary N (UN) or C (UC) to estimate UE and ultimately improve the accuracy of estimating ME. Individual animal data (n = 433) were used from 11 studies with Jersey cows at the University of Nebraska–Lincoln, where samples were analyzed after drying (n = 299) or on an as-is basis (n = 134). Dried samples resulted in greater estimated error variance compared with as-is samples, and thus only as-is samples were used for final models. The as-is data set included a range (min to max) in dry matter intake (11.6–24.6 kg/d), N intake (282–642 g/d), UE excretion (1,390–3,160 kcal/d), UN excretion (85–220 g/d or 20.6–59.5% of N intake), and UC excretion (130–273 g/d). As indicated by a bias in residuals between observed and predicted ME as dietary crude protein (CP; range of 14.9–19.1%) increased, the National Research Council dairy model did not accurately predict ME of diets, as dietary CP varied. The relationship between UE (kcal/d) and UN (g/d) excretion was linear and had an intercept of 880 ± 140 kcal. Because an intercept of 880 is biologically unlikely, the intercept was forced through 0, resulting in linear and quadratic relationships. The regressions of UE (kcal/d) on UN (g/d) excretion were UE = 14.6 ± 0.32 × UN, and UE = 20.9 ± 1.0 × UN − 0.0357 ± 0.0056 × UN2. In the quadratic regression, UE increased, but at a diminishing rate as UN excretion increased. As UC increased, UE linearly and quadratically increased. However, error variance was greater for regression with UC compared with UN as explanatory variables (8.42 vs. 7.42% of mean UE). The use of the quadratic regression between UN and UE excretion to predict ME resulted in a slope bias in ME predictions as dietary CP increased. The linear regression between UE and UN excretion removed slope bias between predicted ME and CP, and thus may be more appropriate for predicting UE across a wider range of dietary CP. Using equations to predict UE from UN should improve our ability to predict diet ME in Jersey cows compared with calculating ME directly from digestible energy
Increasing the concentration of linolenic acid in diets fed to Jersey cows in late lactation does not affect methane production
Although the inclusion of fat has reduced methane production in ruminants, relatively little research has been conducted comparing the effects of source and profile of fatty acids on methane production in lactating dairy cows. A study using 8 multiparous (325 ± 17 DIM; mean ± SD) lactating Jersey cows was conducted to determine effects of feeding canola meal and lard versus extruded byproduct containing flaxseed as a high-C18:3 fat source on methane production and diet digestibility in late-lactation dairy cows. A crossover design with 32-d periods (28-d adaptation and 4-d collections) was used to compare 2 different fat sources. Diets contained approximately 50% forage mixture of corn silage, alfalfa hay, and brome hay; the concentrate mixture changed between diets to include either (1) a conventional diet of corn, soybean meal, and canola meal with lard (control) or (2) a conventional diet of corn and soybean meal with an extruded byproduct containing flaxseed (EXF) as the fat source. Diets were balanced to decrease corn, lard, and canola meal and replace them with soybean mean and EXF to increase the concentration of C18:3 (0.14 vs. 1.20% of DM). Methane production was measured using headbox-style indirect calorimeters. Cattle were restricted to 95% ad libitum feed intake during collections. Milk production (17.4 ± 1.04 kg/d) and dry matter intake (15.4 ± 0.71 kg/d) were similar among treatments. Milk fat (5.88 ± 0.25%) and protein (4.08 ± 0.14%) were not affected by treatment. For methane production, no difference was observed for total production (352.0 vs. 349.8 ± 16.43 L/d for control vs. EXF, respectively). Methane production per unit of dry matter intake was not affected and averaged 23.1 ± 0.57 L/kg. Similarly, methane production per unit of energy-corrected milk was not affected by fat source and averaged 15.5 ± 0.68 L/kg. Heat production was similar, averaging 21.1 ± 1.02 Mcal/d. Digestibility of organic matter, neutral detergent fiber, and crude protein was not affected by diet and averaged 69.9, 53.6, and 73.3%, respectively. Results indicated that increasing C18:3 may not affect methane production or digestibility of the diet in lactating dairy cows
Energy balance and diurnal variation in methane production as affected by feeding frequency in Jersey cows in late lactation
Methane (CH4) production of ruminants typically increases with increased dry matter intake (DMI). However, few studies have observed the effects of feeding multiple times a day and its effects on diurnal variation in CH4 production and energy balance in late-lactation dairy cattle. A study using headbox-style indirect calorimetry and 12 multiparous (225 ± 16.2 d in milk; mean ± SD) lactating Jersey cows was conducted to determine the effects of feeding twice daily on diurnal variation in CH4 production and total energy balance. A crossover design with 14-d periods (10 d of adaption and 4 d of collection) was used to compare 2 treatments. Treatments consisted of either once a day feeding (1×; 100% of feed given at 1000 h) or twice a day feeding (2×; 50% of feed given at 1000 h and the final 50% at 2000 h) with a common diet fed in both treatments. Dry matter intake was not different between treatments, with a mean of 16.9 ± 0.88 kg/d. Once a day feeding tended to have greater milk yield compared with twice a day feeding (21.2 vs. 20.4 ± 1.59 kg/d, respectively). Milk fat and milk protein percentage were not different, with means of 6.18 ± 0.20% and 3.98 ± 0.08%, respectively. Total CH4 production did not differ between treatments, with a mean of 402.1 ± 20.8 L/d. Similarly, CH4 per unit of milk yield and DMI was not different between treatments, with means of 20.5 ± 1.81 and 23.8 ± 1.21 L/kg, respectively. Feeding frequency did not affect diurnal variation of hourly CH4 production, with a mean of 17.1 ± 0.74 L/h. A trend was observed for a treatment × hour interaction. Methane production per hour increased after the second feeding for cattle fed twice versus once daily. Gross energy, digestible energy, metabolizable energy, and balance (milk plus tissue) per kilogram of DMI did not differ by feeding frequency, with means of 4.41 ± 0.01, 3.05 ± 0.03, 2.63 ± 0.03, and 1.32 ± 0.08 Mcal/ kg of DM, respectively. Metabolizable energy for maintenance was 146 kcal/kg of metabolic body weight, with an efficiency of converting metabolizable energy to net energy balance (milk plus tissue) of 76%. Nitrogen balance did not differ among treatments, with a mean balance of 17.3 ± 13.0 g/d. Therefore, total CH4 production and energy maintenance were not affected by feeding frequency. However, CH4 was variable throughout the day, and caution should be exercised when collecting CH4 samples at a limited number of time points because this may under- or overestimate total production
Energy balance and diurnal variation in methane production as affected by feeding frequency in Jersey cows in late lactation
Methane (CH4) production of ruminants typically increases with increased dry matter intake (DMI). However, few studies have observed the effects of feeding multiple times a day and its effects on diurnal variation in CH4 production and energy balance in late-lactation dairy cattle. A study using headbox-style indirect calorimetry and 12 multiparous (225 ± 16.2 d in milk; mean ± SD) lactating Jersey cows was conducted to determine the effects of feeding twice daily on diurnal variation in CH4 production and total energy balance. A crossover design with 14-d periods (10 d of adaption and 4 d of collection) was used to compare 2 treatments. Treatments consisted of either once a day feeding (1×; 100% of feed given at 1000 h) or twice a day feeding (2×; 50% of feed given at 1000 h and the final 50% at 2000 h) with a common diet fed in both treatments. Dry matter intake was not different between treatments, with a mean of 16.9 ± 0.88 kg/d. Once a day feeding tended to have greater milk yield compared with twice a day feeding (21.2 vs. 20.4 ± 1.59 kg/d, respectively). Milk fat and milk protein percentage were not different, with means of 6.18 ± 0.20% and 3.98 ± 0.08%, respectively. Total CH4 production did not differ between treatments, with a mean of 402.1 ± 20.8 L/d. Similarly, CH4 per unit of milk yield and DMI was not different between treatments, with means of 20.5 ± 1.81 and 23.8 ± 1.21 L/kg, respectively. Feeding frequency did not affect diurnal variation of hourly CH4 production, with a mean of 17.1 ± 0.74 L/h. A trend was observed for a treatment × hour interaction. Methane production per hour increased after the second feeding for cattle fed twice versus once daily. Gross energy, digestible energy, metabolizable energy, and balance (milk plus tissue) per kilogram of DMI did not differ by feeding frequency, with means of 4.41 ± 0.01, 3.05 ± 0.03, 2.63 ± 0.03, and 1.32 ± 0.08 Mcal/ kg of DM, respectively. Metabolizable energy for maintenance was 146 kcal/kg of metabolic body weight, with an efficiency of converting metabolizable energy to net energy balance (milk plus tissue) of 76%. Nitrogen balance did not differ among treatments, with a mean balance of 17.3 ± 13.0 g/d. Therefore, total CH4 production and energy maintenance were not affected by feeding frequency. However, CH4 was variable throughout the day, and caution should be exercised when collecting CH4 samples at a limited number of time points because this may under- or overestimate total production
Reducing methane production with corn oil and calcium sulfate: Responses on whole-animal energy and nitrogen balance in dairy cattle
The addition of fat and calcium sulfate to diets fed to ruminants has resulted in a reduction in methane production, but the effects on energy balance have not been studied. A study using indirect calorimetry and 16 multiparous (8 Holstein and 8 Jersey; 78 ± 15 d in milk; mean ± standard deviation) lactating dairy cows was conducted to determine how mitigating methane production by adding corn oil or calcium sulfate to diets containing reduced-fat distillers grains affects energy and nitrogen balance. A replicated 4 × 4 Latin square design with 35-d periods (28 d of adaption and 4 d of collections) was used to compare 4 different dietary treatments. Treatments were composed of a control (CON) diet, which did not contain reduced-fat distillers grain and solubles (DDGS), and treatment diets containing 20% (dry matter basis) DDGS (DG), 20% DDGS with 1.38% (dry matter basis) added corn oil (CO), and 20% DDGS with 0.93% (dry matter basis) added calcium sulfate (CaS). Compared with CON, dry matter intake was not affected by treatment, averaging 29.6 ± 0.67 kg/d. Milk production was increased for diets containing DDGS compared with CON (26.3 vs. 27.8 ± 0.47 kg/d for CON vs. DDGS, respectively), likely supported by increased energy intake. Compared with CON, energy-corrected milk was greater in DG and CO (30.1 vs. 31.4, 31.7, and 31.0 ± 0.67 kg/d for CON, DG, CO, and CaS, respectively). Compared with CON, the addition of calcium sulfate and corn oil to diets containing DDGS reduced methane production per kg of dry matter intake (22.3, 19.9, and 19.6 ± 0.75 L/kg per d for CON, CO, and CaS, respectively). Similarly, methane production per kilogram of energy-corrected milk was reduced with the addition of calcium sulfate and corn oil to diets containing DDGS (14.2, 12.5, and 12.4 ± 0.50 L/kg per d for CON, CO, and CaS, respectively). Compared with CON and CaS, the intake of digestible energy was greater for DG and CO treatments (57.7, 62.1, 62.0, and 59.0 ± 1.38 Mcal/d for CON, DG, CO, and CaS, respectively). Intake of metabolizable energy was greater in all treatments containing DDGS compared with CON (50.5 vs. 54.0 ± 1.08 Mcal/d for CON vs. DDGS, respectively). Net balance (milk plus tissue energy) per unit of dry matter was greater in CO (containing DDGS and oil) than CON (1.55 vs. 1.35 ± 0.06 Mcal/kg for CO vs. CON, respectively). Tissue energy was greater in DG and CO compared with CON (6.08, 7.04, and 3.16 ± 0.99 Mcal/d for DG, CO, and CON, respectively. Results of this study suggest that the addition of oil and calcium sulfate to diets containing DDGS may be a viable option to reduce methane production and in the case of oil also improve net energy balance in lactating dairy cows
Impact of a leptin single nucleotide polymorphism and zilpaterol hydrochloride on growth and carcass characteristics in finishing steers
A total of 4,178 steers (mean initial BW = 403.9 ± 16.04 kg) were used to test the interactive effects, if any, of leptin R25C genotypes (CC, CT, or TT) and zilpaterol hydrochloride (ZH) feeding duration on growth performance and carcass traits. Steers were blocked by arrival at the feed yard, genotyped for the leptin SNP, allotted to genotype-specific pens (90 steers/pen), and assigned randomly within genotype and block to 0 or 21 d of dietary ZH. All pens within a block were slaughtered on the same day (132.1 ± 10.9 d on feed). Final BW of steers fed ZH was 6.0 kg heavier (P = 0.008), and ZH-fed steers had greater (P = 0.003) ADG than steers not fed ZH. Feeding ZH decreased DMI in steers with increased frequency of the T allele (9.67, 9.53, and 9.28 kg/d for CC, CT, and TT, respectively), but DMI increased with the frequency of the T allele (9.68, 9.90, and 10.1 kg for CC, CT, and TT, respectively) when ZH was not fed (leptin genotype × ZH, P = 0.011). At the conclusion of the study, ultrasonic fat was greatest for TT steers (11.4 ± 0.28 mm) and least (P = 0.003) for CC steers (11.0 ± 0.25 mm). Regardless of ZH-feeding duration, TT steers produced a greater (P = 0.006) percentage of USDA yield grade (YG) 4 or higher carcasses (5.4 vs. 2.7%) and a lesser (P = 0.006) percentage of YG 1 carcasses (17.7 vs. 26.8%) than CC steers. In addition, ZH-fed steers produced a greater (P \u3c 0.001) percentage of USDA YG 1 carcasses (25.9 vs. 16.2%) and a lesser (P \u3c 0.001) percentage of YG 4 or higher carcasses (1.6 vs. 6.0%) than steers fed the control diet. Marbling scores and the percentage of carcasses grading USDA Choice and Prime were greater in TT than CC steers when fed diets devoid of ZH, but both marbling and quality grades did not differ among leptin genotypes when fed ZH for 21 d (leptin genotype × ZH, P ≤ 0.03). The amount of HCW gain tended to be less (P = 0.095) for steers of the TT genotype (12.7 kg) than either CC (16.3 kg) or CT (17.0 kg) genotypes. Results indicated that leptin R25C genotype impacted most traits associated with fatness whereas feeding ZH for 21 d affected HCW and ADG positively but impacted feed intake, marbling, and USDA quality grades negatively
Effects of different sources of carbohydrates on intake, digestibility, chewing, and performance of Holstein dairy cows
Association of bovine leptin polymorphisms with energy output and energy storage traits in progeny tested Holstein-Friesian dairy cattle sires
peer-reviewedBackground: Leptin modulates appetite, energy expenditure and the reproductive axis by signalling via its receptor the status of body energy stores to the brain. The present study aimed to quantify the associations between 10 novel and known single nucleotide polymorphisms in genes coding for leptin and leptin receptor with performance traits in 848 Holstein-Friesian sires, estimated from performance of up to 43,117 daughter-parity records per sire. Results: All single nucleotide polymorphisms were segregating in this sample population and none deviated (P > 0.05) from Hardy-Weinberg equilibrium. Complete linkage disequilibrium existed between the novel polymorphism LEP-1609, and the previously identified polymorphisms LEP-1457 and LEP-580. LEP-2470 associated (P < 0.05) with milk protein concentration and calf perinatal mortality. It had a tendency to associate with milk yield (P < 0.1). The G allele of LEP-1238 was associated (P < 0.05) with reduced milk fat concentration, reduced milk protein concentration, longer gestation length and tended to associate (P < 0.1) with an increase in calving difficulty, calf perinatal mortality and somatic cells in the milk. LEP-963 exhibited an association (P < 0.05) with milk fat concentration, milk protein concentration, calving difficulty and gestation length. It also tended to associate with milk yield (P < 0.1). The R25C SNP associated (P < 0.05) with milk fat concentration, milk protein concentration, calving difficulty and length of gestation. The T allele of the Y7F SNP significantly associated with reduced angularity (P < 0.01) and reduced milk protein yield (P < 0.05). There was also a tendency (P < 0.1) for Y7F to associate with increased body condition score, reduced milk yield and shorter gestation (P < 0.1). A80V associated with reduced survival in the herd (P < 0.05). Conclusions Several leptin polymorphisms (LEP-2470, LEP-1238, LEP-963, Y7F and R25C) associated with the energetically expensive process of lactogenesis. Only SNP Y7F associated with energy storage. Associations were also observed between leptin polymorphisms and calving difficulty, gestation length and calf perinatal mortality. The lack of an association between the leptin variants investigated with calving interval in this large data set would question the potential importance of these leptin variants, or indeed leptin, in selection for improved fertility in the Holstein-Friesian dairy cow.Department of Agriculture, Food and Fisheries, Ireland - Research Stimulus Fund (RSF-06-0353; RSF-06-0409); Irish Dairy Research Trust; Teagasc Walsh Fellowshi