Low Overpotential Water Splitting Using Cobalt–Cobalt Phosphide Nanoparticles Supported on Nickel Foam

We report a simple, facile, and safe route for preparation of cobalt–cobalt phosphide (Co/Co2P) nanoparticles and demonstrate their application as efficient low-cost catalysts for electrochemical water splitting. The catalyst achieves good performance in catalyzing both the cathode and anode half-cell water-splitting reactions in 1.0 M KOH and the hydrogen evolution reaction in an acidic electrolyte, 0.5 M H2SO4. For the oxygen evolution reaction in 1.0 M KOH, a current of 10 mA cm–2 was attained at 0.39 V overpotential on a glassy carbon electrode, while an overpotential of 0.19 V was attained at 50 mA cm–2 when the catalyst was supported on nickel foam

Influence of the Fe:Ni Ratio and Reaction Temperature on the Efficiency of (Fe_xNi_1–x)₉S₈ Electrocatalysts Applied in the Hydrogen Evolution Reaction

Inspired by our recent finding that Fe4.5Ni4.5S8 rock is a highly active electrocatalyst for HER, we set out to explore the influence of the Fe:Ni ratio on the performance of the catalyst. We herein describe the synthesis of (FexNi1–x)9S8 (x = 0–1) along with a detailed elemental composition analysis. Furthermore, using linear sweep voltammetry, we show that the increase in the iron or nickel content, respectively, lowers the activity of the electrocatalyst toward HER. Electrochemical surface area analysis (ECSA) clearly indicates the highest amount of active sites for a Fe:Ni ratio of 1:1 on the electrode surface pointing at an altered surface composition of iron and nickel for the other materials. Specific metal–metal interactions seem to be of key importance for the high electrocatalytic HER activity, which is supported by DFT calculations of several surface structures using the surface energy as a descriptor of catalytic activity. In addition, we show that a temperature increase leads to a significant decrease of the overpotential and gain in HER activity. Thus, we showcase the necessity to investigate the material structure, composition and reaction conditions when evaluating electrocatalysts

Deoxygenation of graphene oxide : reduction or cleaning?

We show that the two-component model of graphene oxide (GO), that is, composed of highly oxidized carbonaceous debris complexed to oxygen functionalized graphene sheets, is a generic feature of the synthesis of GO, independent of oxidant or protocol used. The debris present, roughly one-third by mass, can be removed by a base wash. A number of techniques, including solid state NMR, demonstrate that the properties of the base-washed material are independent of the base used and that it contains similar functional groups to those present in the debris but at a lower concentration. Removal of the oxidation debris cleans the GO, revealing its true monolayer nature and in the process increases the C/O ratio (i.e., a deoxygenation). By contrast, treating GO with hydrazine both removes the debris and reduces (both deoxygenations) the graphene sheets

Pentlandite rocks as sustainable and stable efficient electrocatalysts for hydrogen generation

The need for sustainable catalysts for an efficient hydrogen evolution reaction is of significant interest for modern society. Inspired by comparable structural properties of [FeNi]-hydrogenase, here we present the natural ore pentlandite (Fe4.5Ni4.5S8) as a direct ‘rock’ electrode material for hydrogen evolution under acidic conditions with an overpotential of 280 mV at 10 mA cm−2. Furthermore, it reaches a value as low as 190 mV after 96 h of electrolysis due to surface sulfur depletion, which may change the electronic structure of the catalytically active nickel–iron centres. The ‘rock’ material shows an unexpected catalytic activity with comparable overpotential and Tafel slope to some well-developed metallic or nanostructured catalysts. Notably, the ‘rock’ material offers high current densities (≤650 mA cm−2) without any loss in activity for approximately 170 h. The superior hydrogen evolution performance of pentlandites as ‘rock’ electrode labels this ore as a promising electrocatalyst for future hydrogen-based economy