A study of real-time spindle error compensation in single-point diamond turning of optical micro-structured patterns on precision rollers

Micro-structured patterns are widely used in optics since the optical performance can be significantly improved in many applications [1]. One of the most common methods to fabricate the micro-structure is using Single-Point Diamond Turning on Precision Rollers [2]. The accuracy requirement of the Precision Rollers is stringent because the dimension of the microstructure is very small (pitch lengths and depths 10-100μm) and surface finishing is ultra-smooth (Ra<3nm) [2]. In order to achieve this level of accuracy, the manufacturing errors of the machine tool are required to be reduced while error compensation methods are needed to be developed. Spindle errors can be classified as synchronous error and asynchronous error [3]. Synchronous error occurs at integer times of spindle rotation frequency and can be represented as repeatable error while asynchronous error occurs at noninteger times of spindle rotation frequency and can be represented as non-repeatable error. Most of the existing error compensation techniques are based on offline error compensation methods (OECM) which can only compensate the synchronous error [4,5]. The asynchronous error is fluctuating without a predictable value and it is different from the synchronous error so it cannot be eliminated using OECM. One of the most promising methods to compensate the asynchronous error is real-time error compensation method (RECM). Some researchers have studied the RECM and their results showed that it was effective to enhance the machine accuracy [6,7]. However, most of the previous research work is focused on the machine tools with a relatively low accuracy and there is relatively few studies focused on the Single-Point Diamond Turning. Kim and Kim developed a feed-forward control of fast tool servo system for real-time correction of spindle error for diamond turning of flat surfaces [8]. A capacitive displacement sensor was used to measurement the spindle axial error motion and the motion error was compensated using a fast tool servo. A flatness of 0.1μm was achieved with a 100mm diameter aluminum specimen. However, the study only considered the axial error, when it is diamond turned on precision rollers, both the radial error and axial error have to be compensated. This paper attempts to investigate the RECM in Single-Point Diamond Turning of Optical Microstructured Patterns on Precision Rollers. The radial error and axial error were simulated and the compensated results of OECM and RECM were presented considering both synchronous errors and asynchronous errors in radial and axial directions. The results of OECM and RECM were also compared and discussed. Furthermore, the effects of time delay in RECM were studied. An adaptive time-series modeling method was also proposed to predict the realtime error to reduce the time delay effect of RECM. The results show that the RECM is effective and promising to further improve the accuracy of the Single-Point Diamond Turning Precision Rollers

Transcriptome and proteomic analysis of mpox virus F3L-expressing cells

BackgroundMonkeypox or mpox virus (mpox) is a double-stranded DNA virus that poses a significant threat to global public health security. The F3 protein, encoded by mpox, is an apoenzyme believed to possess a double-stranded RNA-binding domain (dsRBD). However, limited research has been conducted on its function. In this study, we present data on the transcriptomics and proteomics of F3L-transfected HEK293T cells, aiming to enhance our comprehension of F3L.MethodsThe gene expression profiles of pCAGGS-HA-F3L transfected HEK293T cells were analyzed using RNA-seq. Proteomics was used to identify and study proteins that interact with F3L. Real-time PCR was used to detect mRNA levels of several differentially expressed genes (DEGs) in HEK293T cells (or Vero cells) after the expression of F3 protein.ResultsA total of 14,822 genes were obtained in cells by RNA-Seq and 1,672 DEGs were identified, including 1,156 up-regulated genes and 516 down-regulated genes. A total of 27 cellular proteins interacting with F3 proteins were identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS), and 19 cellular proteins with large differences in abundance ratios were considered to be candidate cellular proteins. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses showed that the DEGs were significantly enriched in immune-related pathways, including type I interferon signaling pathway, response to virus, RIG-I-like receptor signaling pathway, NOD-like receptor signaling pathway, etc. Moreover, some selected DEGs were further confirmed by real-time PCR and the results were consistent with the transcriptome data. Proteomics data show that cellular proteins interacting with F3 proteins are mainly related to RNA splicing and protein translation.ConclusionsOur analysis of transcriptomic and proteomic data showed that (1) F3L up-regulates the transcript levels of key genes in the innate immune signaling pathway, such as RIGI, MDA5, IRF5, IRF7, IRF9, ISG15, IFNA14, and elicits a broad spectrum of antiviral immune responses in the host. F3L also increases the expression of the FOS and JNK genes while decreasing the expression of TNFR2, these factors may ultimately induce apoptosis. (2) F3 protein interacts with host proteins involved in RNA splicing and protein translation, such as SNRNP70, POLR2H, HNRNPA1, DDX17, etc. The findings of this study shed light on the function of the F3 protein

Reduced binding activity of vaccine serum to omicron receptor-binding domain

Coronavirus disease 2019 (COVID-19) vaccination regimens contribute to limiting the spread of severe acute respiratory syndrome Coronavirus-2 (SARS-CoV-2). However, the emergence and rapid transmission of the SARS-CoV-2 variant Omicron raise a concern about the efficacy of the current vaccination strategy. Here, we expressed monomeric and dimeric receptor-binding domains (RBDs) of the spike protein of prototype SARS-CoV-2 and Omicron variant in E. coli and investigated the reactivity of anti-sera from Chinese subjects immunized with SARS-CoV-2 vaccines to these recombinant RBDs. In 106 human blood samples collected from 91 participants from Jiangxi, China, 26 sera were identified to be positive for SARS-CoV-2 spike protein antibodies by lateral flow dipstick (LFD) assays, which were enriched in the ones collected from day 7 to 1 month post-boost (87.0%) compared to those harvested within 1 week post-boost (23.8%) (P &lt; 0.0001). A higher positive ratio was observed in the child group (40.8%) than adults (13.6%) (P = 0.0073). ELISA results showed that the binding activity of anti-SARS-CoV-2 antibody-positive sera to Omicron RBDs dropped by 1.48- to 2.07-fold compared to its homogeneous recombinant RBDs. Thus, our data indicate that current SARS-CoV-2 vaccines provide restricted humoral protection against the Omicron variant

Detection and Characterization of Defects in Additive Manufacturing by Polarization-Based Imaging System

Abstract Additive manufacturing (AM) technology such as selective laser melting (SLM) often produces a high reflection phenomenon that makes defect detection and information extraction challenging. Meanwhile, it is essential to establish a characterization method for defect analysis to provide sufficient information for process diagnosis and optimization. However, there is still a lack of universal standards for the characterization of defects in SLM parts. In this study, a polarization-based imaging system was proposed, and a set of characterization parameters for SLM defects was established. The contrast, defect contour information, and high reflection suppression effect of the SLM part defects were analyzed. Comparative analysis was conducted on defect characterization parameters, including geometric and texture parameters. The experimental results demonstrated the effects of the polarization imaging system and verified the feasibility of the defect feature extraction and characterization method. The research work provides an effective solution for defect detection and helps to establish a universal standard for defect characterization in additive manufacturing

Modeling and Compensation of Motion Errors for 6-DOF Robotic Manipulators

Six degree-of-freedom (6-DOF) robotic manipulators have been increasingly adopted in various applications in industries due to various advantages, such as large operation space, more degrees of freedom, low cost, easy placement, and convenient programming. However, the robotic manipulator has the problem of insufficient stiffness due to the series structures, which will cause motion errors of the manipulator end. In this paper, taking a 6-DOF robotic manipulator as an example, forward and inverse kinematics models are established, and a new modeling method for the joint angle and space stiffness of the end of the manipulator is proposed, which can establish the composite stiffness model of joint link stiffness and joint stiffness. An error compensation model is subsequently established. The experimental results indicate that the proposed error compensation method can effectively reduce the end motion error of the robotic manipulator, and hence, the working performance and accuracy of the manipulator can be improved. The proposed research is helpful for extending the application of robotic manipulators in precision machining and measurement

Optimum Design of a Composite Optical Receiver by Taguchi and Fuzzy Logic Methods

This paper investigates a composite optical receiver for an indoor visible light communication (VLC) system. The optical gain, received power, and signal-to-noise ratio (SNR) are considered to be optimized. However, it is difficult to find a balance between them in general design and optimization. We propose the Taguchi and fuzzy logic combination method to improve multiple performance characteristics effectively in the optical receiver. The simulated results indicate that the designed receiver has the characteristics of an optical gain of 10.57, a half field of view (HFOV) of 45&deg;, a received power of 6.4635 dBm, a signal-to-noise ratio (SNR) of 89.8874 dB, and a spot size of 2 mm. The appropriate weights of the three performance characteristics for the inputs of the fuzzy controllers increase the optical gain by 13.601 dB, and the received power and SNR by 11.097 dB and 0.373 dB, respectively. Therefore, the optical receiver optimally designed by the Taguchi and fuzzy logic methods can significantly meet the requirements of an indoor VLC system

Measurement and analysis of the radial motion error of aerostatic ultra-precision spindle

The measurement of the rotation error of an aerostatic ultra-precision spindle is critically important to evaluate and hence ensure the precision of machine tools. The Donaldson reversal method, which was taken as the efficient method for error separation theoretically, has been widely used to separate shape errors of standard artifact. However, the accuracy analysis of the Donaldson reversal method has not been fully studied and understood. In this study, a nanometer system for measuring the radial rotation error of aerostatic ultra-precision spindle was constructed based on the Donaldson reversal method. The comparative experiments were carried out to investigate the effects of the motor drive, and an angle correction algorithm was proposed to alleviate the effect of angle deviation. The method of harmonic analysis was applied to investigate the effect of artifact eccentricity, and the relationship between the axial motion and measuring error was also studied. The measuring accuracy can be improved by reducing the cogging torque of motor, the angle deviation, artifact eccentricity and spindle axial motion. Experimental results showed that the measurement uncertainty of both the spindle rotation error and artifact form error can be controlled in nanometer level. Besides, the separated value of the artifact form error was very close to the nominal roundness, which verifies the accuracy of the measurement system and the validity of the error separation method

Multi-Sensor Image Fusion Method for Defect Detection in Powder Bed Fusion

Multi-sensor defect detection technology is a research hotspot for monitoring the powder bed fusion (PBF) processes, of which the quality of the captured defect images and the detection capability is the vital issue. Thus, in this study, we utilize visible information as well as infrared imaging to detect the defects in PBF parts that conventional optical inspection technologies cannot easily detect. A multi-source image acquisition system was designed to simultaneously acquire brightness intensity and infrared intensity. Then, a multi-sensor image fusion method based on finite discrete shearlet transform (FDST), multi-scale sequential toggle operator (MSSTO), and an improved pulse-coupled neural networks (PCNN) framework were proposed to fuse information in the visible and infrared spectra to detect defects in challenging conditions. The image fusion performance of the proposed method was evaluated with different indices and compared with other fusion algorithms. The experimental results show that the proposed method achieves satisfactory performance in terms of the averaged information entropy, average gradient, spatial frequency, standard deviation, peak signal-to-noise ratio, and structural similarity, which are 7.979, 0.0405, 29.836, 76.454, 20.078 and 0.748, respectively. Furthermore, the comparison experiments indicate that the proposed method can effectively improve image contrast and richness, enhance the display of image edge contour and texture information, and also retain and fuse the main information in the source image. The research provides a potential solution for defect information fusion and characterization analysis in multi-sensor detection systems in the PBF process

Research on Continuous Injection Direct Rolling Process for PMMA Optical Plate

Continuous injection direct rolling (CIDR) combined intermittent injection and rolling process is a new technology for molding optical polymer plates with microstructured patterns; research on forming PMMA optical plates is an aspect of it in this paper. The equipment of CIDR process consists of plastic injection module, precision rolling module, and automatic coiling module. Based on the establishing mathematical CIDR models, numerical analysis was used to explode the distribution of velocity, temperature, and pressure in injection-rolling zone. The simulation results show that it is feasible to control the temperature, velocity, and injection-rolling force, so it can form polymer plate under certain process condition. CIDR experiment equipment has been designed and produced. PMMA optical plate was obtained by CIDR experiments, longitudinal thickness difference is 0.005 mm/200 mm, horizontal thickness difference is 0.02/200 mm, transmittance is 86.3%, Haze is 0.61%, and the difference is little compared with optical glasses. So it can be confirmed that CIDR process is practical to produce PMMA optical plates

Selective laser melting of glass with irregular shaped powder

Glass has unique physical characteristics, such as transparency, chemical durability, thermal stability, and electric resistivity, making it an attractive material for numerous industries. As a result, there is a growing interest in the additive manufacturing of glass powder. However, most of the selective laser melting (SLM) processes primarily rely on the utilization of spherical glass powder, and there are no reports of the use of non-spherical glass powders. This paper explores the benefits and possibilities of irregular shaped powder used in SLM of glass. Through a progression of experiments from single-track to single-layer and, ultimately, cube fabrication, the relative density of cube samples was as high as 95%. Feasibility examples were successfully demonstrated, indicating that the irregularly-shaped soda-lime silica glass powder can be successfully used in the SLM process and that process parameter changes can be optimized to yield builds with comparable porosity levels to builds using typical spherical powder