Testing cryopreserved European eel sperm for hybridization (A. japonica × A. anguilla)

[EN] The objective of this study was to assess impact of cryopreserved European eel sperm and Japanese eel native sperm on early fertilization, hatch, survival, and malformation rates of larvae, as well as develop molecular techniques to distinguish different eel species. Eggs from Japanese eel females (Anguilla japonica) were artificially fertilized with sperm of Japanese eel males and cryopreserved sperm from European eel (A. anguilla, extender was modified Tanaka solution and methanol as cryoprotectant). There were no statistical differences (p¿>¿0.05) among the measured parameters such as fertilization, hatch and survival after 10 days post-hatch rates due to large individual differences. The malformation rate of larvae compared to the hatching rate was higher in cryopreserved groups than in the control indicating that the methodology needs further refinement. Genetic analyses (PCR-RFLP, PCR-HRM) proved a clear result in the detection of paternal contribution in hybridization between the Japanese and the European eel and applied PCR-HRM method is a quick and cost effective tool to identify illegally imported A. anguilla at the glass eel stage, which can be transported from Europe to Asia.The research was supported by The Ministry of Education, Culture, Sports, Science and Technology (MEXT)/Japan Society for the Promotion of Science (JSPS) Kakenhi Grant No.15K07562 and Tokyo University of Agriculture Strategic Research Program (TUA-SRP), Mohamed bin Zayed Species Conservation Fund (grant number 12252178), GINOP-2.3.2-15-2016-00054 project of the National Research, Development and Innovation Office of Hungary and EFOP-3.6.3-VEKOP-16-2017-00008 project. The project is co-financed by the European Union, the European Social Fund and KMR_12-1-2012-0435.Müller, T.; Matsubara, H.; Kubara, Y.; Horváth, Á.; Kolics, B.; Taller, J.; Stéger, V.... (2018). Testing cryopreserved European eel sperm for hybridization (A. japonica × A. anguilla). Theriogenology. 113:153-158. https://doi.org/10.1016/j.theriogenology.2018.02.021S15315811

Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments

Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made available as an electronic reprint with the permission of ASM International. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor

Identification of Relevant Time-Varying Parameters of Proxy Caches

this paper has been done on the cache system of the Hungarian research network. 3 Related Wor