Phenyl-Substituted Siloxane Hybrid Gels that Soften Below 140[degrees]C

A characteristic of so-called melting gels is that the gels, which are rigid at room temperature, are able to soften and resoften at temperatures around 110 [degrees]C. However, after consolidation at temperatures higher than 150 [degrees]C, the gels no longer resoften. Two systems of melting gels were investigated: phenyltrimethoxysilane (PhTMS)–diphenyldimethoxysilane (DPhDMS) and phenyltriethoxysilane (PhTES)–diphenyldiethoxysilane (DPhDES). The influence of disubstituted versus monosubstituted alkoxide on the softening behavior and the temperature of decomposition was studied. The consolidation temperature increased as the amount of disubstituted alkoxide increased, while the decomposition temperature increased only slightly. In general, the ethoxy-containing gels (maximum at 150[degrees]C) consolidated at lower temperatures than the methoxy-containing gels (maximum at 180[degrees]C)

Thermal analysis of organically modified siloxane melting gels

Hybrid melting gels were prepared by a sol–gel process, starting with a mono-substituted siloxane and a disubstituted siloxane, methyltrimethoxysilane (MTES) together with dimethyldimethoxysilane (DMDES). Five gel compositions were prepared with concentrations between 50% MTES–50% DMDES and 75% MTES–25% DMDES (in mol.%)

Hybrid Sol–Gel Glasses with Glass-Transition Temperatures below Room Temperature

Melting gels are hybrid gels that have the ability to soften and flow at around 100 ° C for some combinations of mono- and di-substituted alkoxysiloxanes, where substitutions are either all aromatic or all aliphatic. In this study, melting gels were prepared using phenyltriethoxysilane (PhTES) and dimethyldiethoxysilane (DMDES), meaning both an aromatic and aliphatic substitution. Differential scanning calorimetry was performed to identify glass-transition temperatures, and thermal gravimetric analysis coupled with differential thermal analysis (TGA-DTA) was performed to measure weight loss. The glass-transition temperatures ( T g ) ranged from – 61 ° C to + 5.6 ° C, which are between the values in the methyl only system, where all T g values are less than 0 ° C, and those values in the phenyl only system, where T g values are greater than 0 ° C. The T g decreased with an increase in the DMDES fraction. Below 450 ° C, the gels lost little weight, but around 600 ° C there was a drop in weight. This temperature is lower than the temperature for gels prepared with only aromatic substitutions, but higher than that for gels prepared with only aliphatic substitutions. Final heat treatment was carried out at 150 ° C for the gel with 80%PhTES-20%DMDES (in mol%), and the consolidation temperature increased with increasing DMDES content to 205 ° C for the gel with 50%PhTES-50%DMDES. After this heat treatment, the melting gels no longer soften

Corrosion Protection of 304 Stainless Steel with Melting Gels Coatings

Methyl-substituted melting gels were used to coat AISI 304 stainless steel substrates. Crack-free coatings up to 1 mm in thickness were obtained. SEM micrographs of cross-sections con fi rm good adhesion to the surface. Samples were subjected to structural characterization using FT-IR, and Raman spectroscopy. Mechanical properties were investigated by micro-scratch tests. Electrochemical analyses (anodic polarization and electrochemical impedance spectroscopy) were performed in 3.5% NaCl solutions. Electrochemical tests show excellent performance of the coatings against corrosion with no sign of degradation after several months of immersion

Radio Continuum and Star Formation in CO-rich Early Type Galaxies

In this paper we present new high resolution VLA 1.4 GHz radio continuum observations of five FIR bright CO-rich early-type galaxies and two dwarf early-type galaxies. The position on the radio-FIR correlation combined with striking agreements in morphology between high resolution CO and radio maps show that the radio continuum is associated with star formation in at least four of the eight galaxies. The average star formation rate for the sample galaxies detected in radio is approximately 2 solar masses per year. There is no evidence of a luminous AGN in any of our sample galaxies. We estimate Toomre Q values and find that the gas disks may well be gravitationally unstable, consistent with the above evidence for star formation activity. The radio continuum emission thus corroborates other recent suggestions that star formation in early type galaxies may not be uncommon.Comment: 21 pages, 7 figures, to be published in the Astronomical Journa

29Si NMR and SAXS investigation of the hybrid organic-inorganic glasses obtained by consolidation of the melting gels

This study is focused on structural characterization of hybrid glasses obtained by consolidation of melting gels. The melting gels were prepared in molar ratios of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) of 75%MTES-25%DMDES and 65%MTES-35%DMDES. Following consolidation, the hybrid glasses were characterized using Raman, 29Si and 13C Nuclear Magnetic Resonance (NMR) spectroscopies, synchrotron Small Angle X-Ray Scattering (SAXS) and scanning electron microscopy (SEM). Raman spectroscopy revealed the presence of Si–C bonds in the hybrid glasses and 8-membered ring structures in the Si–O–Si network. Qualitative NMR spectroscopy identified the main molecular species, while quantitative NMR data showed that the ratio of trimers (T) to dimers (D) varied between 4.6 and 3.8. Two-dimensional 29Si NMR data were used to identify two distinct types of T3 environments. SAXS data showed that the glasses are homogeneous across the nm to micrometer length scales. The scattering cross section was one thousand times lower than what is expected when phase separation occurs. The SEM images show a uniform surface without defects, in agreement with the SAXS results, which further supports that the hybrid glasses are nonporous

Thickness-properties synergy in organic–inorganic consolidated melting-gel coatings for protection of 304 stainless steel in NaCl solutions

Homogeneous and crack-free methyl-substituted organic–inorganic hybrid glass coatings (thickness up to 10 μm) were deposited on AISI 304 stainless steel. Different hybrid glasses obtained fromconsolidation of the diluted melting gels with various methyltriethoxysilane (MTES)/dimethyldiethoxysilane (DMDES) ratios were evaluated considering chemical structure, coating adhesion and corrosion protection. The 70MTES/30DMDES (molar%) melting-gel coating provided improved corrosion protection for this steel due to the synergy of different properties: a highly cross-linked inorganic structure, a coating plasticity based on the hybrid network, and a good adhesion to the substrate through hydroxyl groups. Electrochemical results showa good barrier film with a passive range of 500 mV, a lowanodic current density (0.03 nA cm−2) and impedance values of 109.5Ωcm2 after two months of immersion in 3.5 wt.% NaCl solution

Electrochemical Properties of Melting Gel Coatings

Organic-inorganic melting gel coatings were applied to titanium alloy substrates to decrease their corrosion and extend their lifetime in an electrochemical application. Melting gels containing phenyl substitutions were coated onto the substrates. The ratio of diphenyl dimethoxysilane (DPhDMS) to methanol was varied to change the thickness of the coatings. The coatings were inspected visually to see that there is good adhesion between the coating and the substrate. Nanoindenter tests were performed to determine hardnes