1,006 research outputs found
Data correlation and analysis of arc tunnel and wind tunnel tests of RSI joints and gaps. Volume 1: Technical report
Heat transfer data measured in gaps typical of those under consideration for joints in space shuttle reusable surface insulation protection systems have been assimilated, analyzed and correlated. The data were obtained in four NASA facilities. Several types of gaps were investigated with emphasis on simple butt joints. Gap widths ranged from 0.07 to 0.7 cm and depths ranged from 1 to 6 cm. Laminar, transitional and turbulent boundary layer flows over the gap opening were investigated. Three-dimensional heating variations were observed within gaps in the absence of external flow pressure gradients. Heat transfer correlation equations were obtained for several of the tests. Thermal protection system performance with and without gaps was compared for a representative shuttle entry trajectory
Aerothermodynamic Assessment of Corrugated Panel Thermal Protection Systems
The feasibility of using corrugated panels as a thermal protection system for an advanced space transportation vehicle was investigated. The study consisted of two major tasks: development of improved correlations for wind tunnel heat transfer and pressure data to yield design techniques, and application of the design techniques to determine if corrugated panels have application future aerospace vehicles. A single-stage-to-orbit vehicle was used to assess advantages and aerothermodynamic penalties associated with use of such panels. In the correlation task, experimental turbulent heat transfer and pressure data obtained on corrugation roughened surfaces during wind tunnel testing were analyzed and compared with flat plate data. The correlations and data comparisons included the effects of a large range of geometric, inviscid flow, internal boundary layer, and bulk boundary layer parameters in supersonic and hypersonic flow
Crop-phenology and LANDSAT-based irrigated lands inventory in the high plains
Optimal LANDSAT image dates for 1980 were identified based on the weekly crop-weather reports for Colorado, New Mexico, South Dakota, Texas, Oklahoma, Kansas, Nebraska, and Wyoming. The 1979 agricultural statistics data were entered into computer files and a revised questionnaire was developed and mailed to ASCS county agents. A set of computer programs was developed to allow the preparation of computer-assisted graphic displays of much of the collected data
Crop phenology and LANDSAT-based irrigated lands inventory in the high plains
The activity concentrated on identifying crop and irrigation data sources for the eight states within the High Plains Aquifer and making contacts concerning the nature of these data. A mail questionnaire was developed to gather specific data not routinely reported through standard data collection channels. Input/output routines were designed for High Plains crop and irrigation data and initial statistical data on crops were input to computer files
Data correlation and analysis of arc tunnel and wind tunnel tests of RSI joints and gaps. Volume 2: Data base
Wind tunnel tests were conducted to determine the aerodynamic heating created by gaps in the reusable surface insulation (RSI) thermal protection system (TPS) for the space shuttle. The effects of various parameters of the RSI on convective heating characteristics are described. The wind tunnel tests provided a data base for accurate assessment of gap heating. Analysis and correlation of the data provide methods for predicting heating in the RSI gaps on the space shuttle
Intra- and Inter-Item Associations Doubly Dissociate the Electrophysiological Correlates of Familiarity and Recollection
SummarySingle-process models of recognition memory posit that recognizing is based on a unidimensional value of global memory strength. By contrast, dual-process models propose the existence of two independent processes subserving the explicit recognition of previously encountered episodes, namely “familiarity” and “recollection.” Familiarity represents a noncontextual form of recognition that may only support the retrieval of associative information when the to-be-associated information can be unitized, such as when two photographs depicting the same person are memorized (intra-item associations). Conversely, recollection enables retrieving associations between arbitrarily linked information, such as associations between photographs of different persons (inter-item associations). By measuring event-related brain potentials (ERPs), we obtained a double dissociation of familiarity and recollection that strongly favors dual-process accounts of recognition memory: the electrophysiological correlate of familiarity was significantly larger for intra- than for inter-item associations. Conversely, the electrophysiological correlate of recollection was significantly larger for inter- than for intra-item associations
Three-Dimensionally Confined Optical Modes in Quantum Well Microtube Ring Resonators
We report on microtube ring resonators with quantum wells embedded as an
optically active material. Optical modes are observed over a broad energy
range. Their properties strongly depend on the exact geometry of the microtube
along its axis. In particular we observe (i) preferential emission of light on
the inside edge of the microtube and (ii) confinement of light also in
direction of the tube axis by an axially varying geometry which is explained in
an expanded waveguide model.Comment: 5 pages, 4 figure
A study of leeside flow field heat transfer on Shuttle Orbiter configuration
A coupled inviscid and viscous theoretical solution of the flow about the entire configuration is the desirable and comprehensive approach to defining thermal environments about the space shuttle orbiter. Simplified methods for predicting entry heating on leeside surfaces of the orbiter are considered. Wind tunnel heat transfer and oil flow data at Mach 6 and 10 and Reynolds numbers ranging from 500,000 to 73 million were used to develop correlations for the wing upper surface and the top surface of the fuselage. These correlations were extrapolated to flight Reynolds number and compared with heating data obtained during the shuttle STS-2 reentry. Efforts directed toward the wing leeside surface resulted in an approach which generally agreed with the flight data. Heating predictions for the upper fuselage were less successful due to the extreme complexity of local flow interactions and the associated heating environment
EFFECTS OF MAXIMAL STRENGTH ON GROUND REACTION FORCE PATTERNS DURING COUNTERMOVEMENT JUMPS
The purpose of this study was to determine the effects of maximal strength on ground reaction force (GRF) patterns during countermovement jumps (CMJ). Nineteen female lacrosse players performed CMJ and isometric mid-thigh pulls (IMTP) on force plates. Principal components analysis was used on the CMJ time series data to extract GRF patterns. Maximum GRF during the IMTP were extracted and used as a measure of maximal strength. Spearman’s rho correlations were used to analyse the relationship between maximal strength and GRF patterns during the CMJ. Results suggest that maximal strength is positively correlated to a GRF CMJ pattern characterised by greater rate of force development and peak force as well as less of a decrease in GRF immediately after the end of the eccentric phase (i.e., absence of bimodal GRF profile)
- …