????????? ?????? ?????? ?????? ?????? ????????? ?????? ?????? ??????

Cryogenic machining uses liquid nitrogen (LN2) as a coolant. This machining process can reduce the cutting temperature and increase tool life. Titanium alloys have been widely used in the aerospace and automobile industries because of their high strength-to-weight ratio. However, they are difficult to machine because of their poor thermal properties, which reduce tool life. In this study, we applied cryogenic machining to titanium alloys. Orthogonal cutting experiments were performed at a low cutting speed (1.2 - 2.1 m/min) in three cooling conditions: dry, cryogenic, and cryogenic plus heat. Cutting force and friction coefficients were observed to evaluate the machining characteristics for each cooling condition. For the cryogenic condition, cutting force and friction coefficients increased, but decreased for the cryogenic plus heat condition

????????????????????? ?????? ????????? ??????????????? ???????????? ?????? ?????????

The surface roughness and cutting forces are the important factors for the machine-part quality during the hard-turning process. The aim of this paper is to optimize hard-cutting conditions via implementation of response surface methodology (RSM). The experiments were conducted for the hard-turning process with the Box-Behnken design. The validation of the surface roughness and cutting forces was performed with the obtained 2nd order polynomial regression model. The results showed that the surface roughness was strongly dependent upon the RPM. The diminution of the cutting force was attributed to the low feed rate and the depth of cut. On the basis of the RSM, optimized cutting conditions of RPM, feed rate, and depth of cut are 3440, 0.0352 [mm/rev], and 0.03 [mm]. In this optimal cutting condition, the surface roughness can be around Ra= 0.202 ??m

Improving Kinematic Accuracy of Soft Wearable Data Gloves by Optimizing Sensor Locations

Bending sensors enable compact, wearable designs when used for measuring hand configurations in data gloves. While existing data gloves can accurately measure angular displacement of the finger and distal thumb joints, accurate measurement of thumb carpometacarpal (CMC) joint movements remains challenging due to crosstalk between the multi-sensor outputs required to measure the degrees of freedom (DOF). To properly measure CMC-joint configurations, sensor locations that minimize sensor crosstalk must be identified. This paper presents a novel approach to identifying optimal sensor locations. Three-dimensional hand surface data from ten subjects was collected in multiple thumb postures with varied CMC-joint flexion and abduction angles. For each posture, scanned CMC-joint contours were used to estimate CMC-joint flexion and abduction angles by varying the positions and orientations of two bending sensors. Optimal sensor locations were estimated by the least squares method, which minimized the difference between the true CMC-joint angles and the joint angle estimates. Finally, the resultant optimal sensor locations were experimentally validated. Placing sensors at the optimal locations, CMC-joint angle measurement accuracies improved (flexion, 2.8° ± 1.9°; abduction, 1.9° ± 1.2°). The proposed method for improving the accuracy of the sensing system can be extended to other types of soft wearable measurement devices

Bioprinting of three-dimensional dentin-pulp complex with local differentiation of human dental pulp stem cells

Numerous approaches have been introduced to regenerate artificial dental tissues. However, conventional approaches are limited when producing a construct with three-dimensional patient-specific shapes and compositions of heterogeneous dental tissue. In this research, bioprinting technology was applied to produce a three-dimensional dentin-pulp complex with patient-specific shapes by inducing localized differentiation of human dental pulp stem cells within a single structure. A fibrin-based bio-ink was designed for bioprinting with the human dental pulp stem cells. The effects of fibrinogen concentration within the bio-ink were investigated in terms of printability, human dental pulp stem cell compatibility, and differentiation. The results show that micro-patterns with human dental pulp stem cells could be achieved with more than 88% viability. Its odontogenic differentiation was also regulated according to the fibrinogen concentration. Based on these results, a dentin-pulp complex having patient-specific shape was produced by co-printing the human dental pulp stem cell-laden bio-inks with polycaprolactone, which is a bio-thermoplastic used for producing the overall shape. After culturing with differentiation medium for 15 days, localized differentiation of human dental pulp stem cells in the outer region of the three-dimensional cellular construct was successfully achieved with localized mineralization. This result demonstrates the possibility to produce patient-specific composite tissues for tooth tissue engineering using three-dimensional bioprinting technology

Isolation and characterization of Streptococcus sp. from diseased flounder (Paralichthys olivaceus) in Jeju Island

Streptococcus sp. is gram-positive coccus that causes streptococcal infections in fish due to intensification of aquaculture and caused significant economic losses in fish farm industry. A streptococcal infection occurred from cultured diseased olive flounder (Paralichthys olivaceus) in May, 2005 at a fish farm in Jeju Island, Korea. The diseased flounder exhibited bilateral exophthalmic eyes and rotten gills; water temperature was 16~18℃ when samples were collected. Of the 22 fish samples collected, 3 samples were identified as Lactococcus garvieae and 18 samples were identified as Streptococcus parauberis by culture-based, biochemical test. Serological methods such as slide agglutination, hemolysis and antimicrobial susceptibility test were also used as well as multiplex PCR-based method to simultaneously detect and confirm the pathogens involved in the infection. S. parauberis and L. garvieae have a target region of 700 and 1100 bp., respectively. One fish sample was not identified because of the difference in the different biochemical and serological tests and was negative in PCR assay. In the present study, it showed that S. parauberis was the dominant species that caused streptococcosis in the cultured diseased flounder

Quasi-Eigenstate Evolution in Open Chaotic Billiards

We experimentally studied evolution of quasi-eigenmodes as classical dynamics undergoing a transition from being regular to chaotic in open quantum billiards. In a deformation-variable microcavity we traced all high-Q cavity modes in a wide range of frequency as the cavity deformation increased. By employing an internal parameter we were able to obtain a mode-dynamics diagram at a given deformation, showing avoided crossings between different mode groups, and could directly observe the coupling strengths induced by ray chaos among encountering modes. We also show that the observed mode-dynamics diagrams reflect the underlying classical ray dynamics in the phase space.Comment: 4 pages, 4 figure