Characterization and effect of optimized spray-drying conditions on spray-dried coriander essential oil

Coriander (Coriandrum sativum L.) essential oil (CEO) has many beneficial features, including antimicrobial and antifungal properties along with good aroma. It also has an important role in food processing and preservation. However, CEO is highly volatile and sensitive to external factors (heat, light and oxygen), as well as susceptible to lipid oxidation due to environmental and general processing conditions. This limits water solubility, making it difficult to incorporate CEO into aqueous food matrices, which further limits their industrial application. Spray-drying encapsulation may prevent CEO oxidation, increase CEO oxidative stability and improve their physicochemical properties. In this study, spray-dried CEO (SDCEO) was prepared using a mini laboratory-scale spray-dryer and the processing conditions were optimized. The SDCEO were characterized in respect to free fatty acids (FFA), peroxide values (PV), fatty acid (FA) profiles, Fourier-transform infrared spectroscopy (FTIR) and physical morphology by scanning electron microscopy (SEM). Results indicated that the maximum value of FFA, PV, fatty acid composition (including petroselinic, linoleic and oleic acids) in SDCEO were observed at the following spray-drying conditions: an inlet-air temperature (IAT) of 140 °C, needle speed (NS) of 2 s and the wall-material (WM) at 25%. The minimum values were observed at an IAT of 180 °C, NS of 4 s and WM of 30%. Analysis of variance and the interaction effects of independent factors showed that IAT and WM significantly positively influenced the response for good oxidative stability. Thus, SDCEO is likely to be used as a natural active ingredient in the food processing, cosmetic, nutraceutical and pharmaceutical industries with high stability, and may be stored for a long time without evaporation or oxidation.info:eu-repo/semantics/publishedVersio

Effect of fat contents of buttermilk on fatty acid composition, lipolysis, vitamins and sensory properties of cheddar-type cheese

Cheddar-type cheese produced from buttermilk had softer texture than standard cheddar cheese due to lower fat content of buttermilk. Fat is extremely important for the functional characteristics and optimum textural attributes of cheese. The effect of different fat contents of buttermilk on chemical characteristics of cheddar-type cheese is not previously investigated. This investigation was conducted to know the effect of different fat contents of buttermilk on fatty acids composition, organic acids, vitamins, lipolysis and sensory characteristics of cheddar-type cheese. Cheddar-type cheese was produced from buttermilk having 1, 1.75, 2.50 and 3.25% fat contents (control, T1, T2 and T3). Fat content of control, T1, T2 and T3 were 9.81, 16.34, 25.17 and 31.19%. Fatty acids profile was determined on GC–MS, organic acids and vitamin A and E were determined on HPLC. Free fatty acids, peroxide value and cholesterol were determined. Cheddar-style cheese produced from buttermilk (1% fat) showed that it had softer texture and lacking typical cheese flavor. Gas chromatography–mass spectrometry (GC–MS) analysis showed that long-chain unsaturated fatty acids in control, T1, T2 and T3 samples were 45.88, 45.78, 45.90 and 46.19 mg/100 g. High Performance Liquid Chromatography (HPLC) analysis showed that lactic acid, propionic acid, citric acid and acetic acid gradually and steadily increased during the storage interval of 90 days. At the age of 90 days, lactic acid in control, T1, T2 and T3 was 4,789, 5,487, 6,571 and 8,049 ppm, respectively. At the end of ripening duration of 90 days, free fatty acids in control, T1, T2 and T3 were 0.29, 0.31, 0.35 and 0.42% with no difference in peroxide value. Stability of vitamin A after 90 days storage control, T1, T2 and T3 was 87.0, 80.0, 94.0 and 91.0%. Flavor score of cheddar-type cheese produced from butter milk having 1.0, 2.5 and 3.25% fat content was 81, 89 and 91% of total score (9). Hence, it is concluded that cheddar-type cheese can be produced from buttermilk having 2.5 and 3.25% fat contents with acceptable sensory attributes. Application of buttermilk for the production of other cheese varieties should be studied

Effect of fat contents of buttermilk on fatty acid composition, lipolysis, vitamins and sensory properties of cheddar-type cheese

Cheddar-type cheese produced from buttermilk had softer texture than standard cheddar cheese due to lower fat content of buttermilk. Fat is extremely important for the functional characteristics and optimum textural attributes of cheese. The effect of different fat contents of buttermilk on chemical characteristics of cheddar-type cheese is not previously investigated. This investigation was conducted to know the effect of different fat contents of buttermilk on fatty acids composition, organic acids, vitamins, lipolysis and sensory characteristics of cheddar-type cheese. Cheddar-type cheese was produced from buttermilk having 1, 1.75, 2.50 and 3.25% fat contents (control, T1, T2 and T3). Fat content of control, T1, T2 and T3 were 9.81, 16.34, 25.17 and 31.19%. Fatty acids profile was determined on GC–MS, organic acids and vitamin A and E were determined on HPLC. Free fatty acids, peroxide value and cholesterol were determined. Cheddar-style cheese produced from buttermilk (1% fat) showed that it had softer texture and lacking typical cheese flavor. Gas chromatography–mass spectrometry (GC–MS) analysis showed that long-chain unsaturated fatty acids in control, T1, T2 and T3 samples were 45.88, 45.78, 45.90 and 46.19 mg/100 g. High Performance Liquid Chromatography (HPLC) analysis showed that lactic acid, propionic acid, citric acid and acetic acid gradually and steadily increased during the storage interval of 90 days. At the age of 90 days, lactic acid in control, T1, T2 and T3 was 4,789, 5,487, 6,571 and 8,049 ppm, respectively. At the end of ripening duration of 90 days, free fatty acids in control, T1, T2 and T3 were 0.29, 0.31, 0.35 and 0.42% with no difference in peroxide value. Stability of vitamin A after 90 days storage control, T1, T2 and T3 was 87.0, 80.0, 94.0 and 91.0%. Flavor score of cheddar-type cheese produced from butter milk having 1.0, 2.5 and 3.25% fat content was 81, 89 and 91% of total score (9). Hence, it is concluded that cheddar-type cheese can be produced from buttermilk having 2.5 and 3.25% fat contents with acceptable sensory attributes. Application of buttermilk for the production of other cheese varieties should be studied.info:eu-repo/semantics/publishedVersio

Essential components from plant source oils: a review on extraction, detection, identification, and quantification

Oils derived from plant sources, mainly fixed oils from seeds and essential oil from other parts of the plant, are gaining interest as they are the rich source of beneficial compounds that possess potential applications in different industries due to their preventive and therapeutic actions. The essential oils are used in food, medicine, cosmetics, and agriculture industries as they possess antimicrobial, anticarcinogenic, anti-inflammatory and immunomodulatory properties. Plant based oils contain polyphenols, phytochemicals, and bioactive compounds which show high antioxidant activity. The extractions of these oils are a crucial step in terms of the yield and quality attributes of plant oils. This review paper outlines the different modern extraction techniques used for the extraction of different seed oils, including microwave-assisted extraction (MAE), pressurized liquid extraction (PLE), cold-pressed extraction (CPE), ultrasound-assisted extraction (UAE), supercritical-fluid extraction (SFE), enzyme-assisted extraction (EAE), and pulsed electric field-assisted extraction (PEF). For the identification and quantification of essential and bioactive compounds present in seed oils, different modern techniques—such as high-performance liquid chromatography (HPLC), gas chromatography–mass spectrometry (GC-MS), Fourier transform infrared spectroscopy (FTIR), gas chromatography–infrared spectroscopy (GC-IR), atomic fluorescence spectroscopy (AFS), and electron microscopy (EM)—are highlighted in this review along with the beneficial effects of these essential components in different in vivo and in vitro studies and in different applications. The primary goal of this research article is to pique the attention of researchers towards the different sources, potential uses and applications of oils in different industries.info:eu-repo/semantics/publishedVersio

Fatty acids profile, antioxidant activity, lipid oxidation, induction period, and sensory properties of burgers produced from blends of fish and mango kernel oils

ABSTRACTIn this study, five different types of fish burgers were produced using 80% ground fish meat, 10% lipid, 6% spices mixture and 4% water. Burgers (5 mm thickness and 90 g weight) were produced using 100% fish oil (control), 75% fish oil and 25% mango kernel oil (MKO) (T1), 50% fish oil and 50% MKO (T2), 25% fish oil and 75% MKO (T3), 0% fish oil and 100% MKO (T4). Burgers were packaged in polyethylene bags and stored at −16 to −18°C for 90 days.   The mangiferin, quercetin, catechin, chlorogenic and caffeic acid in MKO were 1381, 87, 512, and 973 mg/100 g. Total antioxidant capacity of control, T1, T2, T3, and T4 were 18.97, 31.47, 47.69, 65.37, and 78.82%. GC-MS analysis showed that ALA, EPA, and DHA) in T2 were 0.85, 3.62, and 4.19%. In controlled storage, loss of ALA, EPA, and DHA was 55, 14, and 11%. At T2 concentration, antioxidant compounds of MKO significantly altered the lipid oxidation in burgers. After storage in T2, loss of ALA, EPA, and DHA was 3.6, 1.98, and 1.71%. POV of 90 days stored control, T1, T2, T3, and T4 was 3.42, 1.55, 0.63, 0.41, and 0.31 (MeqO2/kg). Induction period of fish oil, MKO, in all levels was 2.45, 64.28, 7.33, 13.42, 18.39, and 62.84 hrs. Color flavor and texture score of 90 days stored T2 was 91, 90, and 86% of total score. MKO and fish oil can be used at 50:50 concentrations to formulate fish burgers of acceptable sensory properties

A comprehensive review on the availability of bioactive compounds, phytochemicals, and antioxidant potential of plum (Prunus Domestica)

ABSTRACTPlums are the ubiquitous fruit belonging to genus Prunus, subgenus Prunus, consumed as food and have many health benefits and medicinal effect in the treatment of many diseases. Pulp from plums is also used in different beverages. Plums are the potential source of polyphenolic compounds and bioactive compounds such as phenolic, anthocyanins, and carotenoids and many organic acids such as citric acid and malic acid. Plums are also the abundant sources of many minerals such as calcium, magnesium, phosphorus, potassium, and vitamins A, B, K, and C. Plums are the abundant sources of predominant antioxidants and phenolic compounds such as caffeic acid, chlorogenic acid, crypto-chlorogenic acid, and neo-chlorogenic acid. These antioxidants and bioactive compounds are effective in the treatment and prevention of gastrointestinal diseases, bone heath, and cardiovascular diseases and in maintaining the blood glucose level. Plums helps in the heart diseases prevention, as it is low in fat content and high in dietary fiber. It is also effective in the treatment of lung and oral cancer. The consumption of plums boosts human health and prevents many diseases. The review discusses the importance, production, different varieties of plums along with its nutritional profile, availability of bioactive compounds, phytochemical composition, and antioxidants mainly phenolic and flavonoid compounds. It also introduces the beneficial effect of the bioactive compounds in heart, lungs, and cardiovascular diseases, followed by its in vivo human and animal studies