The Legislator-In-Chief

The State of the Union and Recommendation Clauses of Article II, Section 3provide that the President shall from time to time give to the Congress Information of the State of the Union, and recommend to their consideration such Measures as he shall judge necessary and expedient. Those thirty-one words envision the President as the lead active participant in the embryonic stages of the making of laws. Eight separate principles animate the President\u27s legislative duties and powers before the presentment process. When the State of the Union and Recommendation Clauses are seen to have this textual and analytical subtlety, they reveal the sophistication of the Framers\u27 design that the President, through her institutionally unique ability to acquire and analyze information valuable to the leadership of the Republic, would have significantly more to contribute to the legislative process than merely to sign off on their creation by Congress. Far from making the President a cipher in the legislative process, the Constitution created the Legislator-in-Chief

Plankton production in the Vembanad Lake and adjacent waters in relation to the environmental parameters

The Vembanad Lake and its connected backwater system around Cochin are well known as the nursery grounds for the commercially important fishery resources of this area. This account embodies the results of studies on the environmental parameters of the estuarine system around Cocb in extending over an area of 300 sq. km. Observations were made on the hydrography, primary and secondary productions. The relative influence of the environmental factors like, temperature, salinity, dissolved oxygen and nutrients on the plankton production is interpreted from the correlation coefficient

Convergence Rates in L^2 for Elliptic Homogenization Problems

We study rates of convergence of solutions in L^2 and H^{1/2} for a family of elliptic systems {L_\epsilon} with rapidly oscillating oscillating coefficients in Lipschitz domains with Dirichlet or Neumann boundary conditions. As a consequence, we obtain convergence rates for Dirichlet, Neumann, and Steklov eigenvalues of {L_\epsilon}. Most of our results, which rely on the recently established uniform estimates for the L^2 Dirichlet and Neumann problems in \cite{12,13}, are new even for smooth domains.Comment: 25 page

Maximizing Neumann fundamental tones of triangles

We prove sharp isoperimetric inequalities for Neumann eigenvalues of the Laplacian on triangular domains. The first nonzero Neumann eigenvalue is shown to be maximal for the equilateral triangle among all triangles of given perimeter, and hence among all triangles of given area. Similar results are proved for the harmonic and arithmetic means of the first two nonzero eigenvalues

Advances in the endoscopic diagnosis and treatment of Barrett’s neoplasia

Barrett’s oesophagus is a well-recognised precursor of oesophageal adenocarcinoma. The incidence of oesophageal adenocarcinoma is continuing to rise in the Western world with dismal survival rates. In recent years, efforts have been made to diagnose Barrett’s earlier and improve surveillance techniques in order to pick up cancerous changes earlier. Recent advances in endoscopic therapy for early Barrett’s cancers have shifted the paradigm away from oesophagectomy and have yielded excellent results

Effect of variation in mesh size on trawl efficiency

Result of comparative fishing trials with a bulged belly design with three different mesh ranges in the body and wing to study the effect of mesh size difference on the performance of gear is discussed. While there is no significant difference in catch rate, predictably the 40 mm mesh size trawl fared wen when small sized fish like anchovies formed the major catch. The trawls with 60 and 80 mm mesh size gave better horizontal spread at a lower resistance showing savings in fuel

Inhibition of Vascular Smooth Muscle Cell Proliferation by Gentiana lutea Root Extracts

Gentiana lutea belonging to the Gentianaceae family of flowering plants are routinely used in traditional Serbian medicine for their beneficial gastro-intestinal and anti-inflammatory properties. The aim of the study was to determine whether aqueous root extracts of Gentiana lutea consisting of gentiopicroside, gentisin, bellidifolin-8-O-glucoside, demethylbellidifolin-8-O-glucoside, isovitexin, swertiamarin and amarogentin prevents proliferation of aortic smooth muscle cells in response to PDGF-BB. Cell proliferation and cell cycle analysis were performed based on alamar blue assay and propidium iodide labeling respectively. In primary cultures of rat aortic smooth muscle cells (RASMCs), PDGF-BB (20 ng/ml) induced a two-fold increase in cell proliferation which was significantly blocked by the root extract (1 mg/ml). The root extract also prevented the S-phase entry of synchronized cells in response to PDGF. Furthermore, PDGF-BB induced ERK1/2 activation and consequent increase in cellular nitric oxide (NO) levels were also blocked by the extract. These effects of extract were due to blockade of PDGF-BB induced expression of iNOS, cyclin D1 and proliferating cell nuclear antigen (PCNA). Docking analysis of the extract components on MEK1, the upstream ERK1/2 activating kinase using AutoDock4, indicated a likely binding of isovitexin to the inhibitor binding site of MEK1. Experiments performed with purified isovitexin demonstrated that it successfully blocks PDGF-induced ERK1/2 activation and proliferation of RASMCs in cell culture. Thus, Gentiana lutea can provide novel candidates for prevention and treatment of atherosclerosis

Bioabsorbable versus titanium screws in anterior cruciate ligament reconstruction using hamstring autograft: a prospective, blinded, randomized controlled trial with 5-year follow-up

Background: Longer term studies of bioabsorbable screws for ACL reconstruction are reported, but results are specific to the exact screw material and design. Titanium and PLLA-HA screw outcomes have been compared only to 2 years. Purpose: The aim of this study was to compare the clinical and radiological outcomes of PLLAHA screw (BS) versus a titanium screw (TS), for hamstring tendon anterior cruciate ligament reconstruction over 5 years. We hypothesized that there are no differences in clinical scores, and tunnel widening, between the BS and the TS groups, and that the PLLA-HA screw as seen on MRI should show high grade resorption and ossification response over 5 years. Methods: 40 patients undergoing ACLR were randomized to receive either a PLLA-HA screw (BS group) or a Titanium screw (TS group) for ACL fixation. Blinded evaluation was performed at 2 & 5 years with IKDC & Lysholm knee score, KT-1000 arthrometer, single legged hop test, and MRI to evaluate tunnel and screw volumes, peri-screw ossification, graft integration and cyst formation. Results: There was no difference in any clinical outcome measure at 2 or 5 years between the 2 groups. At 2 years, the BS femoral tunnel was smaller than the TS tunnel (p=0.02) and at 5 years, there was no difference. At 2 years the femoral BS screw was a mean 76% of its original volume and by 5 years, 36%. At 2 years the tibial BS screw mean volume was 68% of its original volume and by 5 years, 46%. At 5 years BS group 88% of femoral tunnels and 56% of tibial tunnels demonstrated a significant ossification response. There was no increase in cyst formation in the BS group and no screw breakages. Conclusion: Our study has shown equivalent clinical results between BS and TS groups at 2 and 5 years. This PLLA-HA screw was not associated with increased tunnel widening or cyst formation when compared with the titanium screw. The PLLA-HA screw demonstrated progressive screw resorption and gradual, but incomplete ossification over 5 years

Exploratory survey along the south-west coast of India with reference to the use of try-net

The results of an exploratory survey for the assessment of prawn resources conducted along the south-west coast of India for a short period in 1967 are presented. The trend in total catch as well as prawn catch showed a decrease from the beginning to the end of the survey. During the survey, besides two trawl nets, a small try-net was aslo used for testing the grounds. A non-parametric test was applied to the catches by the two types of nets, the trawl net and the try-net, and it was found that the catch efficiency of the nets was the same. The possibility of using such a try-net for exploratory surveys and also for testing the grounds during commercial trawling is discussed

Topochemical engineering of composite hybrid fibers using layered double hydroxides and abietic acid

Topochemical engineering of hybrid materials is an efficient way of synthesizing hydrophobic and highly tensile fiber composites by utilizing the intermolecular hydrogen bonds in natural materials. These materials include wood pulp fibers, abietic acid (resin acid) and inexpensive metal salts. In this work, a hybrid composite was created using bleached and unbleached kraft pulp fibers as cellulose platform. In situ co-precipitation of layered double hydroxide (LDH) was performed to grow LDH crystals on the surface of the cellulose fibers, followed by the immobilization of abietic acid (AA) on LDH-grafted cellulose. Here we aimed to benefit from the hydrogen bonding between -OH groups of cellulose and LDH, and the -COOH groups of AA to obtain charge-directed assembly of one material on the other material. Thus, composite hybrid fibers (C-HF) were produced and then characterized by optical (CAM), spectroscopic (XRD, IR) and microscopic techniques (SEM) to determine their average length and distribution, structure and purity, bonding, and morphology. These fibers further were tested for water contact angle (hydrophobicity), oil absorption (lipophilicity), tensile strength and ISO brightness measurements. The performance of C-HF was compared with unmodified reference fibers (REF), fibers composed with only AA (C-F) and LDH-hybridized fibers (HF). The results revealed a variety of correlations between materials and their properties due to characteristic surface morphology, functional groups, hydrogen bonding and natural co-materials such as lignin and hemicelluloses. Attractive and repulsive van der Waals forces between material entities play a crucial role in the resulting properties