Continuous wrist blood pressure measurement with ultrasound

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Blood pressure is an important parameter for the development of cardiovascular disease. By monitoring the blood pressure over 24 hours hypertension can be detected and treatment can be started. A new noninvasive long term blood pressure measurement method measures the blood pressure continuously on the wrist using ultrasound, a small balloon and a controller. The pressure is controlled with a voice coil actuator. The wrist blood pressure changes during motion. These movements are assessed with a water filled tube to calibrate the measurement to aortic blood pressure

Continuous wrist blood pressure measurement with ultrasound

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Blood pressure is an important parameter for the development of cardiovascular disease. By monitoring the blood pressure over 24 hours hypertension can be detected and treatment can be started. A new noninvasive long term blood pressure measurement method measures the blood pressure continuously on the wrist using ultrasound, a small balloon and a controller. The pressure is controlled with a voice coil actuator. The wrist blood pressure changes during motion. These movements are assessed with a water filled tube to calibrate the measurement to aortic blood pressure

Effect of daptomycin and vancomycin on Staphylococcus epidermidis biofilms: An in vitro assessment using fluorescence in situ hybridization

Colonization of in-dwelling catheters by microbial biofilms is a major concern in patient health eventually leading to catheter-related blood stream infections. Biofilms are less susceptible to standard antibiotic therapies that are effective against planktonic bacteria. Standard procedure for the detection of microorganisms on the catheter tip is culture. However, viable but non-culturable cells (VBNCs) may be missed. The aim of this study was to evaluate the use of fluorescence in situ hybridization (FISH) as an indicator to visualize and quantify the effect of the antibiotics daptomycin and vancomycin on biofilms in situ. We established an in vitro catheter biofilm model of Staphylococcus epidermidis biofilms on polyurethane catheters. Biofilm activity was measured by FISH and correlated to colony forming units (CFU) data. Digital image analysis was used for quantification of total biofilm mass and the area of the FISH positive biofilm cells. FISH showed a pronounced effect of both antibiotics on the biofilms, with daptomycin having a significantly stronger effect in terms of both reduction of biofilm mass and number of FISH-positive cells. This supports the anti-biofilm capacity of daptomycin. Interestingly, neither antibiotic was able to eradicate all of the FISH-positive cells. In summary, FISH succeeded in visualization, quantification, and localization of antibiotic activity on biofilms. This technique adds a new tool to the arsenal of test systems for anti-biofilm compounds. FISH is a valuable complementary technique to CFU since it can be highly standardized and provides information on biofilm architecture and quantity and localization of survivor cells

Investigation of the Attachment of Circulating Endothelial Cells to a Cell Probe: Combined Experimental and Numerical Study

Circulating endothelial cells (CECs) are a reliable biomarker for cardiovascular diseases (CVDs). A major unresolved challenge limiting the widespread use of CECs for the diagnosis and monitoring of CVDs is their unreliable detection. This problem is mainly attributed to the low sample volume (5-10 mL) of commonly used ex vivo CEC isolation methods. To overcome this limitation, the BMProbe for the in vivo isolation of CECs is proposed. It consists of a twisted medical flat wire with a polymer-coated surface functionalized with anti-CD105 antibodies. A combined experimental and numerical study is performed to investigate which flow conditions lead to an increased cell attachment to the probe's surface. Endothelial cells are solved in a dextran solution and circulated in a flow system containing the BMProbes. Microscopic images of the attached CECs are taken. In addition, the experiments are simulated using a computational fluid dynamics (CFD) flow solver to quantify the flow conditions at the probe's surface. The microscopic images are superimposed with the CFD data to investigate the influence of wall shear rate and wall normal rate on the attachment of CECs to the probe. Most of all attached cells (85.5%) are found in areas of negative wall normal rate

Novel measurement system for respiratory aerosols and droplets in indoor environments

The SARS-CoV-2 pandemic has created a great demand for a better understanding of the spread of viruses in indoor environments. A novel measurement system consisting of one portable aerosol-emitting mannequin (emitter) and a number of portable aerosol-absorbing mannequins (recipients) was developed that can measure the spread of aerosols and droplets that potentially contain infectious viruses. The emission of the virus from a human is simulated by using tracer particles solved in water. The recipients inhale the aerosols and droplets and quantify the level of solved tracer particles in their artificial lungs simultaneously over time. The mobile system can be arranged in a large variety of spreading scenarios in indoor environments and allows for quantification of the infection probability due to airborne virus spreading. This study shows the accuracy of the new measurement system and its ability to compare aerosol reduction measures such as regular ventilation or the use of a room air purifier

Surface modification of decellularized bovine carotid arteries with human vascular cells significantly reduces their thrombogenicity

Background: Since autologous veins are unavailable when needed in more than 20% of cases in vascular surgery, the production of personalized biological vascular grafts for implantation has become crucial. Surface modification of decellularized xenogeneic grafts with vascular cells to achieve physiological luminal coverage and eventually thromboresistance is an important prerequisite for implantation. However, ex vivo thrombogenicity testing remains a neglected area in the field of tissue engineering of vascular grafts due to a multifold of reasons. Methods: After seeding decellularized bovine carotid arteries with human endothelial progenitor cells and umbilical cord-derived mesenchymal stem cells, luminal endothelial cell coverage (LECC) was correlated with glucose and lactate levels on the cell supernatant. Then a closed loop whole blood perfusion system was designed. Recellularized grafts with a LECC > 50% and decellularized vascular grafts were perfused with human whole blood for 2 h. Hemolysis and complete blood count evaluation was performed on an hourly basis, followed by histological and immunohistochemical analysis. Results: While whole blood perfusion of decellularized grafts significantly reduced platelet counts, platelet depletion from blood resulting from binding to re-endothelialized grafts was insignificant (p = 0.7284). Moreover, macroscopic evaluation revealed thrombus formation only in the lumen of unseeded grafts and histological characterization revealed lack of CD41 positive platelets in recellularized grafts, thus confirming their thromboresistance. Conclusion: In the present study we were able to demonstrate the effect of surface modification of vascular grafts in their thromboresistance in an ex vivo whole blood perfusion system. To our knowledge, this is the first study to expose engineered vascular grafts to human whole blood, recirculating at high flow rates, immediately after seeding

Direct estimation of the wall shear rate using parametric motion models in 3D

Abstract We present a new optical-flow-based technique to estimate the wall shear rate using a special illumination technique that makes the brightness of particles dependent on the distance from the wall. The wall shear rate is derived directly (that means, without previous calculation of the velocity vector field) from two of the components of the velocity gradient tensor which in turn describes the kinematics of fluid flows up to the first order. By incorporating this into a total least squares framework, we can apply a further extension of the structure tensor technique. Results obtained both from synthetical and real data are shown, and reveal a substantial improvement compared to conventional techniques.

In-vivo coronary flow profiling based on biplane angiograms: influence of geometric simplifications on the three-dimensional reconstruction and wall shear stress calculation

Abstract Background Clinical studies suggest that local wall shear stress (WSS) patterns modulate the site and the progression of atherosclerotic lesions. Computational fluid dynamics (CFD) methods based on in-vivo three-dimensional vessel reconstructions have recently been shown to provide prognostically relevant WSS data. This approach is, however, complex and time-consuming. Methodological simplifications are desirable in porting this approach from bench to bedside. The impact of such simplifications on the accuracy of geometry and wall shear stress calculations has to be investigated. Methods We investigated the influence of two methods of lumen reconstruction, assuming circular versus elliptical cross-sections and using different resolutions for the cross-section reconstructions along the vessel axis. Three right coronary arteries were used, of which one represented a normal coronary artery, one with "obstructive", and one with "dilated" coronary atherosclerosis. The vessel volume reconstruction was performed with three-dimensional (3D) data from a previously validated 3D angiographic reconstruction of vessel cross-sections and vessel axis. Results The difference between the two vessel volumes calculated using the two evaluated methods is less than 1 %. The difference, of the calculated pressure loss, was between 2.5% and 8.5% for the evaluated methods. The distributions of the WSS histograms were nearly identical and strongly cross-correlated (0.91–0.95). The good agreement of the results was confirmed by a Chi-square test. Conclusion A simplified approach to the reconstruction of coronary vessel lumina, using circular cross-sections and a reduced axial resolution of about 0.8 mm along the vessel axis, yields sufficiently accurate calculations of WSS.</p

Blood pressure measurement on the cheek

In a large group of patients, it is impossible to measure blood pressure using an upper arm cuff. An alternative, non-invasive method of blood pressure measurement is required for patients with severe limb deformities or obesity, for amputees, and in the emergency medicine. The device proposed here measures blood pressure in the cheek using a small pressure pad and a pump to occlude the cheek artery – arteria facialis – and assesses blood flow with an infrared light source and a detector. The infrared light signal is analysed to assess the systolic and diastolic blood pressure of the patient. Manual evaluation of the light intensity signal showed a good agreement between cheek blood pressure measurement and a reference measurement using an upper arm cuff