1,908 research outputs found
Squark Pair Production in the MSSM with Explicit CP Violation
We analyze effects of the CP-odd soft phases in the MSSM on the
pair-productions of colored superpartners in pp collisions at the LHC energies.
We find that, among all pair-production processes, those of the scalar quarks
in the first and second generations are particularly sensitive to the CP-odd
phases, more precisely, to the phases of the gluinos and neutralinos. We
compute pair-production cross sections, classify various production modes
according to their dependencies on the gluino and neutralino phases, perform a
detailed numerical analysis to determine individual as well as total cross
sections, and give a detailed discussion of EDM bounds. We find that
pair-productions of first and second generation squarks serve as a viable probe
of the CP violation sources in the gaugino sector of the theory even if
experiments cannot determine chirality, flavor and electric charge of the
squarks produced.Comment: 36 pp, 14 ps figures, 1 table, Corrected the cross sections; mild
changes in numerical results; conclusion unchange
Electroweak Stability and Discovery Luminosities for New Physics
What is the luminosity needed for discovering new physics if the electroweak
scale is to remain stable? In this work we study this question, with the
example of a real singlet scalar which couples to the Higgs field already at
the renormalizable level. Observing that the electroweak scale remains stable
if the two scalars couple in a seesawic fashion, we show that the HL-LHC,
expected to deliver an integrated luminosity around 3/ab, can discover scalars
weighing up to 800 GeV. The FCC-hh, on the other hand, can discover scalars as
heavy as 2.3 TeV at 100/ab luminosity. It thus follows that the new physics
that does not destabilize the electroweak scale can be accessed only at high
luminosities, and is not possible exclude by the current LHC results.Comment: 14 pages, 14 figures, 5 tables; journal versio
CMS HCAL Installation and Commissioning
The installation and commissioning of the Hadron Calorimeter system of the CMS detector is described and the performance of the various monitoring systems, the progress in the calibration work and the current plans for the HCAL calorimeter are summarized
Radiation-Hardness Measurements of High Content Quartz Fibres Irradiated with 24 GeV Protons up to 1.25 Grad
We investigated the darkening of two high OH- content quartz fibres irradiated with 24 GeV protons at the Cern PS facility IRRAD. The two tested fibres have a 0.6 mm quartz core diameter, one with hard plastic cladding (qp) and the other with quartz cladding (qq). These fibres were exposed at about 1.25 Gigarad in 3 weeks. The fibres became opaque below 380nm, and in the range 580-650 nm. The darkening under irradiation and damage recovery after irradiation as a function of dose and time are similar to what we observed with electrons. The typical attenuation at 455 nm are 1.44 + - 0.22 and 2.20 + - 0.15 dB/m at 100 Mrad for qp and qq fibres, respectively. The maximum damage recovery is also observed near this wavelength
The effect of supersymmetric CP phases on Chargino-Pair Production via Drell-Yan Process at the LHC
We compute the rates for pp annihilation into chargino-pairs via Drell-Yan
process taking into account the effects of supersymmetric soft phases, at
proton-proton collider. In particular, the phase of the mu parameter gains
direct accessibility via the production of dissimilar charginos. The phases of
the trilinear soft masses do not have a significant effect on the cross
sections.Comment: 24 pages, 7 figure
Design, Performance, and Calibration of CMS Hadron-Barrel Calorimeter Wedges
Extensive measurements have been made with pions, electrons and muons on four production wedges of the Compact Muon Solenoid (CMS) hadron barrel (HB) calorimeter in the H2 beam line at CERN with particle momenta varying from 20 to 300 GeV/c. Data were taken both with and without a prototype electromagnetic lead tungstate crystal calorimeter (EB) in front of the hadron calorimeter. The time structure of the events was measured with the full chain of preproduction front-end electronics running at 34 MHz. Moving-wire radioactive source data were also collected for all scintillator layers in the HB. These measurements set the absolute calibration of the HB prior to first pp collisions to approximately 4%
Energy Response and Longitudinal Shower Profiles Measured in CMS HCAL and Comparison With Geant4
The response of the CMS combined electromagnetic and hadron calorimeter to beams of pions with momenta in the range 5-300 GeV/c has been measured in the H2 test beam at CERN. The raw response with the electromagnetic compartment calibrated to electrons and the hadron compartment calibrated to 300 GeV pions may be represented by sigma = (1.2) sqrt{E} oplus (0.095) E. The fraction of energy visible in the calorimeter ranges from 0.72 at 5 GeV to 0.95 at 300 GeV, indicating a substantial nonlinearity. The intrinsic electron to hadron ratios are fit as a function of energy and found to be in the range 1.3-2.7 for the electromagnetic compartment and 1.4-1.8 for the hadronic compartment. The fits are used to correct the non-linearity of the e pi response to 5% over the entire measured range resulting in a substantially improved resolution at low energy. Longitudinal shower profile have been measured in detail and compared to Geant4 models, LHEP-3.7 and QGSP-2.8. At energies below 30 GeV, the data, LHEP and QGSP are in agreement. Above 30 GeV, LHEP gives a more accurate simulation of the longitudinal shower profile
Synchronization and Timing in CMS HCAL
The synchronization and timing of the hadron calorimeter (HCAL) for the Compact Muon Solenoid has been extensively studied with test beams at CERN during the period 2003-4, including runs with 40 MHz structured beam. The relative phases of the signals from different calorimeter segments are timed to 1 ns accuracy using a laser and equalized using programmable delay settings in the front-end electronics. The beam was used to verify the timing and to map out the entire range of pulse shapes over the 25 ns interval between beam crossings. These data were used to make detailed measurements of energy-dependent time slewing effects and to tune the electronics for optimal performance
Design, Performance and Calibration of the CMS Forward Calorimeter Wedges
We report on the test beam results and calibration methods using charged particles of the CMS Forward Calorimeter (HF). The HF calorimeter covers a large pseudorapidity region (3\l |\eta| \le 5), and is essential for large number of physics channels with missing transverse energy. It is also expected to play a prominent role in the measurement of forward tagging jets in weak boson fusion channels. The HF calorimeter is based on steel absorber with embedded fused-silica-core optical fibers where Cherenkov radiation forms the basis of signal generation. Thus, the detector is essentially sensitive only to the electromagnetic shower core and is highly non-compensating (e/h \approx 5). This feature is also manifest in narrow and relatively short showers compared to similar calorimeters based on ionization. The choice of fused-silica optical fibers as active material is dictated by its exceptional radiation hardness. The electromagnetic energy resolution is dominated by photoelectron statistics and can be expressed in the customary form as a/\sqrt{E} + b. The stochastic term a is 198% and the constant term b is 9%. The hadronic energy resolution is largely determined by the fluctuations in the neutral pion production in showers, and when it is expressed as in the electromagnetic case, a = 280% and b = 11%
Design, Performance, and Calibration of the CMS Hadron-Outer Calorimeter
The CMS hadron calorimeter is a sampling calorimeter with brass absorber and plastic scintillator tiles with wavelength shifting fibres for carrying the light to the readout device. The barrel hadron calorimeter is complemented with an outer calorimeter to ensure high energy shower containment in the calorimeter. Fabrication, testing and calibration of the outer hadron calorimeter are carried out keeping in mind its importance in the energy measurement of jets in view of linearity and resolution. It will provide a net improvement in missing \et measurements at LHC energies. The outer hadron calorimeter will also be used for the muon trigger in coincidence with other muon chambers in CMS
- âŠ