11 research outputs found
Ultrasonic-assisted extraction to enhance the recovery of bioactive phenolic compounds from Commiphora gileadensis leaves
The âultrasonic-assisted extraction (UAE)â method was utilized in this work to assess how different process parameters affected the yield and recovery of phenolic compounds from the leaf of Commiphora gileadensis, which is one of the medicinal plants with a variety of biological functions. Its leaf is used for a various of therapeutic applications, such as the treatment of bacterial infections, inflammation, and wound healing. The âOne-Factor-At-a-Time (OFAT)â approach was employed to examine the impacts of various UAE process parameters on the process of extraction, which include time of extraction, sample/solvent ratio, ultrasonic frequency, and solvent (ethanol) concentration. The extracts were then investigated for the presence of several phytochemicals using analytical techniques such as âGas Chromatography-Mass Spectroscopy (GCâMS)â and âFourier Transform Infrared Spectroscopy (FTIR)â studies. The findings showed that the maximum extraction yield, the total phenolic content (TPC), and the total flavonoids content (TFC) of the ethanolic extract of the leaves of C. gileadensis using the UAE method were at 31.80 ± 0.41 %, 96.55 ± 2.81 mg GAE/g d.w. and 31.66 ± 2.01 mg QE/g d.w. accordingly under a procedure duration of 15 min, ultrasonic frequency of 20 kHz, solvent/sample ratio of 1:20 g/mL, and solvent concentration of 40 % v/v. The leaves extract of C. gileadensis included 25 phenolic compounds that were previously unreported, and GCâMS analysis confirmed their presence. Hence, it follows that the UAE technique can successfully extract the phytochemicals from C. gileadensis for a variety of therapeutic uses
Sono-electrolysis performance based on indirect continuous sonication and membraneless alkaline electrolysis: Experiment, modelling and analysis
In the present study, experiments of membraneless alkaline sono-electrolysis are combined to a mathematical model describing the performance of a sono-electrolyzer based on the electrochemical resistances and overpotentials (activation, Ohmic and concentration) and the oscillation of the acoustic cavitation bubble, and its related sono-physical and sonochemical effects, as a single unit and within population. The study aims to elucidate the mechanism of action of acoustic cavitation when coupled to alkaline electrolysis, using a membraneless H-cell configuration and indirect continuous sonication (40Â kHz, 60 We). The calorimetric characterization constituted the bridge between experimental results and the numerical and simulation approach, while the quantification of the rate of produced hydrogen both experimentally and numerically highlighted the absence of the contribution of sonochemistry, and explained the role of ultrasounds by the action of shockwaves and microjets. Finally, the energetic sono-physical approach allowed an estimation of the predominance of the shockwaves and microjets effects according to the bubble size distribution within the population corresponding to the acoustic conditions of the study. The resulting macroscopic effect in sono-electrolysis process has been assessed considering the induced degassing. A reduction in the fraction of electrodesâ coverage by bubbles from 76% to 42% has been recorded, corresponding to a decrease of 7.2% in Ohmic resistance and 62.35% in bubble resistance
Simultaneous Galvanic Generation of Fe2+ Catalyst and Spontaneous Energy Release in the Galvano-Fenton Technique: A Numerical Investigation of Phenolâs Oxidation and Energy Production and Saving
International audienceThe present paper investigates the potential of the Galvano-Fenton process as an advanced technique in terms of the simultaneous oxidation of a model pollutant, phenol, and the energy release and saving as compared to conventional electrochemical techniques, namely, Fenton, Fenton-like, and Electro-Fenton. A numerical model describing the electrochemical, electrolytic, and phenolâs mineralization reactions is presented. Simulations are conducted to predict the kinetics of ferrous and ferric ions, radicalsâ formation, and phenol degradation along with released power. Parametric analysis and comparisons are also performed between the basic configuration of the Galvano-Fenton process and its upgraded version integrating a pre-immersion stage of the electrodes in the electrolyte equivalent to 25% of the total experimentâs duration. The ratio of the initial concentration of H2O2 to the concentration of the released/added Fe2+ catalyst is varied from 10 to 30. The effect of phenol concentration is inspected over the range of 0.188 to 10 mg/L as well. Compared to conventional Fenton-based techniques, the Galvano-Fenton process demonstrated a higher performance by reaching 1.34% of degradation efficiency per released J. This is associated with the generation of hydroxyl radicals of 0.047 nM/released J with initial concentrations of hydrogen peroxide and phenol of 0.187 mM and 2 ”M, respectively. Moreover, the integration of the pre-immersion stage allowed the overcoming the barrier of the null degradation rate at the initial instant
Impact of ultrasonicated Lactobacillus delbrueckii subsp. bulgaricus, Streptococcus thermophilus and Lactiplantibacillus plantarum AF1 on the safety and bioactive properties of stirred yoghurt during storage
In this study, the effects of ultrasonicated Lactobacillus delbrueckii subsp. bulgaricus, Streptococcus thermophilus and Lactiplantibacillus plantarum AF1 (100 W, 30 kHz, 3 min) on the safety and bioactive properties of stirred yoghurt during storage (4 °C for 21 days) were investigated. The results showed that sonicated cultures were more effective in reducing pathogens than untreated ones. The highest antioxidant activity (DPPH and ABTS), α-glucosidase and α-amylase inhibition capacity were found in yoghurt containing sonicated probiotic + sonicated yoghurt starter cultures (P + Y + ). The highest amount of peptides (12.4 mg/g) was found in P + Y + yoghurts at the end of the storage time. There were not significant differences between the exopolysaccharide content of P + Y+ (17.30 mg/L) and P + Y- (17.20 mg/L) yoghurts, although it was significantly (P â€Â 0.05) higher than the other samples. The use of ultrasonicated cultures could enhance the safety of stirred yoghurt and improve its functional and bioactive properties
Galvano-Fenton Engineering Solution with Spontaneous Catalystâs Generation from Waste: Experimental Efficiency, Parametric Analysis and Modeling Interpretation Applied to a Clean Technology for Dyes Degradation in Water
International audienceIn this paper, the degradation of the diazo dye naphthol blue black (NBB) using the Galvano-Fenton process is studied experimentally and numerically. The simulations are carried out based on the anodic, cathodic, and 34 elementary reactions evolving in the electrolyte, in addition to the oxidative attack of NBB by HOâ at a constant rate of 3.35Ă107 molâ1â
m3â
sâ1 during the initiation stage of the chain reactions. The selection of the operating conditions including the pH of the electrolyte, the stirring speed, and the electrodes disposition is performed by assessing the kinetics of NBB degradation; these parameters are set to 3, 350 rpm and a parallel disposition with a 3 cm inter-electrode distance, respectively. The kinetics of Fe(III) in the electrolyte were monitored using the principles of Fricke dosimetry and simulated numerically. The model showed more than a 96% correlation with the experimental results in both the blank test and the presence of the dye. The effects of H2O2 and NBB concentrations on the degradation of the dye were examined jointly with the evolution of the simulated H2O2, Fe2+, and HOâ concentrations in the electrolyte. The model demonstrated a good correlation with the experimental results in terms of the initial degradation rates, with correlation coefficients exceeding 98%
Kinetic pathways of iron electrode transformations in Galvano-Fenton process: A mechanistic investigation of in-situ catalyst formation and regeneration
International audienc
The Galvano-Fenton process: Experimental insights and numerical mechanistic investigation applied to the degradation of acid orange 7
International audienceIn the present study, the kinetics of degradation of acid orange 7 (AO7) by the Galvano-Fenton process is assessed experimentally and simulated numerically in order to figure out the mechanism of generation and consumption of free radicals with this novel advanced oxidation process. 10 mg/L of the azo dye are degraded during 20 min by combining a copper-iron Galvanic cell to Fenton mechanism at pH 3. The electrochemical and electrolytic reactions are approached following two scenarios, whose the more complex includes the cathodic and anodic reactions, the Fenton scheme and the formation of ferric and ferrous irons complexes and salt as well as the reactivity of sulfate ions. The numerical results demonstrated a high correlation coefficient of 93.5% with experimental results using this latter scenario, while the identified pathways of generation and consumption of H O âą and S O 4 âąâ , considering their contribution to the initiation reactions of the chain mechanism of AO7 degradation, demonstrated a significant participation of S O 4 âąâ. The sensitivity of the process to the corrosion current was examined numerically over the range 0.3 to 1 mA, the results exhibited the achievement of a steady state for the molar concentrations of H O âą and S O 4 âąâ. This observation was explained by the continuous release of Fe 2 + catalyst in the Galvano-Fenton process, in contrast with the classic Fenton scheme. The comparison of both Galvano-Fenton and classic Fenton processes in one hand, and Galvano-Fenton and electro-Fenton processes in the other hand, was further investigated and discussed numerically
A Novel Energy-from-Waste Approach for Electrical Energy Production by GalvanoâFenton Process
International audienceA novel approach allowing the production of electrical energy by an advanced oxidation process is proposed to eliminate organic micropollutants (MPs) in wastewaters. This approach is based on associating the GalvanoâFenton process to the generation of electrical power. In the previous studies describing the GalvanoâFenton (GF) process, iron was directly coupled to a metal of more positive potential to ensure degradation of organic pollutants without any possibility of producing electrical energy. In this new approach, the GalvanoâFenton process is constructed as an electrochemical cell with an external circuit allowing recovering electrons exchanged during the process. In this study, Malachite Green (MG) dye was used as a model of organic pollutant. Simultaneous MG degradation and electrical energy production with the GF method were investigated in batch process. The investigation of various design parameters emphasis that utilization of copper as a low-cost cathode material in the galvanic couple, provides the best treatment and electrical production performances. Moreover, these performances are improved by increasing the surface area of the cathode. The present work reveals that the GF process has a potential to provide an electrical power density of about 200 W mâ2. These interesting performances indicate that this novel Energy-from-Waste strategy of the GF process could serve as an ecological solution for wastewater treatmen