978 research outputs found
Recommended from our members
Recent results from the DIII-D Tokamak
The goal of the DIII-D program is to provide the integrated basis for commercially attractive steady state fusion power plants. Significant progress toward this goal has been achieved, enabled by system improvements including an error field correction coil, an expanded diagnostic set, a digital plasma control system, and high power rf systems. Simultaneous improvements in both the confinement and stability have been achieved during both VH-mode and negative central shear discharges. Fully non-inductive discharges with high bootstrap current fraction have been obtained. The divertor program has demonstrated simultaneous reduction of divertor heat flux and effective particle control using gas puffing and an in-vessel cryopump. Control of the wall particle inventory, He exhaust, and characterization of the scrapeoff layer and divertor plasma have been achieved. Progress has also been made in addressing additional specific needs for ITER: investigation of basic transport scaling, disruption characterization and avoidance, material erosion, and steady state beta limits
Collective and independent-particle motion in two-electron artificial atoms
Investigations of the exactly solvable excitation spectra of two-electron
quantum dots with a parabolic confinement, for different values of the
parameter R_W expressing the relative magnitudes of the interelectron repulsion
and the zero-point kinetic energy of the confined electrons, reveal for large
R_W a remarkably well-developed ro-vibrational spectrum associated with
formation of a linear trimeric rigid molecule composed of the two electrons and
the infinitely heavy confining dot. This spectrum transforms to one
characteristic of a "floppy" molecule for smaller values of R_W. The
conditional probability distribution calculated for the exact two-electron wave
functions allows for the identification of the ro-vibrational excitations as
rotations and stretching/bending vibrations, and provides direct evidence
pertaining to the formation of such molecules.Comment: Published version. Latex/Revtex, 5 pages with 2 postscript figures
embedded in the text. For related papers, see
http://www.prism.gatech.edu/~ph274c
Advancing the Law of Weapons Control - Comparative Approaches to Strengthen Nuclear Non-Proliferation
This article analyzes in-depth the SAGSI recommendation that more effective safeguards draw upon the elements (including the managed access provisions) contained in Part X of the Verification Annex to the Convention on the Prohibition of Chemical Weapons.” SAGSI found that the Chemical Weapons Convention (CWC) offers approaches for verification and investigation that may be adaptable to the NPT
Dynamical tunneling in molecules: Quantum routes to energy flow
Dynamical tunneling, introduced in the molecular context, is more than two
decades old and refers to phenomena that are classically forbidden but allowed
by quantum mechanics. On the other hand the phenomenon of intramolecular
vibrational energy redistribution (IVR) has occupied a central place in the
field of chemical physics for a much longer period of time. Although the two
phenomena seem to be unrelated several studies indicate that dynamical
tunneling, in terms of its mechanism and timescales, can have important
implications for IVR. Examples include the observation of local mode doublets,
clustering of rotational energy levels, and extremely narrow vibrational
features in high resolution molecular spectra. Both the phenomena are strongly
influenced by the nature of the underlying classical phase space. This work
reviews the current state of understanding of dynamical tunneling from the
phase space perspective and the consequences for intramolecular vibrational
energy flow in polyatomic molecules.Comment: 37 pages and 23 figures (low resolution); Int. Rev. Phys. Chem.
(Review to appear in Oct. 2007
Recommended from our members
Optimized Baking of the DIII-D Vessel
The DIII-D tokamak vacuum vessel baking system is used to heat the vessel walls and internal hardware to an average temperature of 350 C to allow rapid conditioning of the vacuum surfaces. The system combines inductive heating and a circulating hot air system to provide rapid heating with temperature uniformity required by stress considerations. In recent years, the time to reach 350 C had increased from 9 hrs to 14 hrs. To understand and remedy this sluggish heating rate, an evaluation of the baking system was recently performed. The evaluation indicated that the mass of additional in-vessel hardware (50% increase in mass) was primarily responsible. This paper reports on this analysis and the results of the addition of an electric air heater and procedural changes that have been implemented. Preliminary results indicate that the time to 350 C has been decreased to 4.5 hours and the temperature uniformity has improved
Recommended from our members
Outgassing tests on materials used in the DIII-D magnetic fusion tokamak
In order to achieve high performance plasma discharges in the DIII-D magnetic fusion tokamak, impurity levels must be carefully controlled. Since first wall materials can desorb volatile impurities during these discharges, it is important to characterize and control the outgassing of these materials. An outgassing chamber was built to measure the outgassing properties of various materials used in the DIII-D vessel. The results of pump-down tests performed on ATJ graphite, thin Grafoil {reg_sign} gaskets, and MgO coaxial cables will be presented. In addition to pumpdown tests it was desired to study the behavior of the materials at temperatures up to 400 C, which is the maximum temperature to which the DIII-D vessel is baked. The station was modified to include independent heating control of the sample and a simple load-lock chamber
Recommended from our members
DATA ACQUISITION AND PROTECTION FOR NEW DII-D IN-VESSEL COILS
OAK-B135 The installation of new internal magnetic coils (I-Coils) in the DIII-D tokamak at General Atomics required extensive additions to the experiment data acquisition and protection capabilities. This set of 12 coils (up to 7 kA each) is designed to allow improved feedback stabilization of resistive wall modes which limit the plasma performance. The acquisition and signal conditions needs of the I-Coil power system presented an opportunity to try a new data acquisition approach which increased both the sampling rate and sample size per channel compared to the standard DIII-D CAMAC acquisition equipment. A 96 channel Compact-PCI (cPCI) digitizer system was purchased for the I-Coil project to acquire up to approximately 380 MB of power supply and coil current data per plasma discharge. Additional instrumentation and control was provided to protect personnel, the new coils, the tokamak, the facility and improve machine availability. This paper will present discussions of technical and programmatic requirements, based for requirements, the design selection outcome, installation experience, integration issues, commissioning experience, and lessons learned. The data acquisition system is described in detail including a conservative signal isolation scheme, signal grounding standards, anti-aliasing filters, and synchronization of acquisition. Protection interlocks are described, including high voltage isolation, water flow measurement, and the coil grounding-shorting switches
- …