407 research outputs found
Numerical Modeling and Performance Evaluation of Vacuum Membrane Distillation for Energy-Efficient Seawater Desalination: Towards Energy-Efficient Solutions
Investigating the Efficacy of Oily Water Treatment at a De-Oiling Facility in the Northern Industrial Center of CINA - Hassi Messaoud: A Statistical Physics Assessment
Environmental protection is becoming a primary objective when choosing processes andtechnologies for treating oily waters resulting from hydrocarbon production. The focus of treatingoily waters is to eliminate contaminants from effluents before discharging them into the receivingenvironment while adhering to discharge standards. Our work aims to analyze the treatment processfor oily waters in the API unit of the North Industrial Center (CINA), which involves a physical–chemical treatment using activated silica and Kurifix. The study aims to improve the treatmentprocess used for oily water treatment to ensure water conservation for reuse. To enhance the CINAHMDoily water treatment process, we created coagulants with different doses (C1–C6) using sodiumsilicate, activated silicate (sodium silicate + sulfuric acid), distilled water, Kurifix, and an oxygenscavenger while measuring pH, HC (hydrocarbon), and SS (suspended solids) levels. Coagulationand flocculation processes were used to remove suspended solids and hydrocarbons from the water.The results show that the coagulant used reduces suspended matter and hydrocarbon content andincreases pH. The best treatment is achieved with a coagulant prepared with distilled water, 5%sodium silicate, and 2% sulfuric acid. The optimal dose of coagulant is 16 ppm. Automatic dosingprovides better efficiency than manual dosing. The study recommends continuous verification ofchemical preparation and injection, periodic cleaning of settling tanks, and monitoring of oily waterentering the station
Comprehensive Analysis of Phytochemical Composition, Antioxidant Potential, and Antibacterial Activity of <em>T. polium</em>
\ua9 2024 by the authors.This study aims to thoroughly examine the chemicals and effects of the ethanol extract from T. polium’s upper parts. We used the Soxhlet method for extraction, resulting in an extract with a significant yield of 20.6%. Qualitative analysis identified a variety of compounds, such as tannins, saponins, reducing compounds, terpenoids, quinones, and alkaloids. In quantitative analysis using the colorimetric method, we found the extract was rich in total flavonoids (20.78 mg equivalent QE/g DW extract) and total polyphenols (227.43 mg equivalent GAE/g DW extract). To assess antioxidant potential, we used the ferric reducing antioxidant power (FRAP) method, with ascorbic acid and butylated hydroxytoluene (BHT) as standards. The extract showed moderate activity in both the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and FRAP methods at concentrations of 65 \ub5g/mL and 21 mg/mL, respectively. Additionally, we tested the ethanolic extract against various bacteria using the disk diffusion technique on agar medium. The results indicated that the T. polium extract had moderate effectiveness against Gram-negative bacteria like Pseudomonas aeruginosa ATCC 9027 and Escherichia coli ATCC 8739, as well as Gram-positive bacteria like Staphylococcus aureus ATCC 6538 and Bacillus subtilis ATCC 6633. We further investigated the composition of the ethanolic extract through LC-MS/MS analysis, establishing a detailed profile of phenolic compounds, with six flavonoids identified as the main polyphenolic constituents. This thorough evaluation provides insights into the potential therapeutic uses of T. polium
Formulation and Characterization of Double Emulsions W/O/W Stabilized by Two Natural Polymers with Two Manufacturing Processes (Comparative Study)
\ua9 2024 by the authors.Four distinct types of multiple emulsions were synthesized using xanthan gum and pectin through two distinct manufacturing processes. The assessment encompassed the examination of morphology, stability, and rheological properties for the resulting water-in-oil-in-water (W/O/W) double emulsions. Formulations were meticulously crafted with emulsifiers that were compatible with varying compositions. Remarkably stable multiple emulsions were achieved with a 0.5 wt% xanthan concentration, demonstrating resilience for nearly two months across diverse storage temperatures. In contrast, multiple emulsions formulated with a higher pectin concentration (2.75 wt%) exhibited instability within a mere three days. All multiple emulsions displayed shear-thinning behavior, characterized by a decline in apparent viscosity with escalating shear rates. Comparatively, multiple emulsions incorporating xanthan gum showcased elevated viscosity at low shear rates in contrast to those formulated with pectin. These results underscore the pivotal role of the stepwise process over the direct approach and emphasize the direct correlation between biopolymer concentration and emulsion stability. This present investigation demonstrated the potential use of pectin and xanthan gum as stabilizers of multiple emulsions with potential application in the pharmaceutical industry for the formulation of topical dosage forms
Modeling and Optimization of Hybrid Fenton and Ultrasound Process for Crystal Violet Degradation Using AI Techniques
\ua9 2023 by the authors. This study conducts a comprehensive investigation to optimize the degradation of crystal violet (CV) dye using the Fenton process. The main objective is to improve the efficiency of the Fenton process by optimizing various physicochemical factors such as the Fe2+ concentration, H2O2 concentration, and pH of the solution. The results obtained show that the optimal dosages of Fe2+ and H2O2 giving a maximum CV degradation (99%) are 0.2 and 3.13 mM, respectively. The optimal solution pH for CV degradation is 3. The investigation of the type of acid for pH adjustment revealed that sulfuric acid is the most effective one, providing 100% yield, followed by phosphoric acid, hydrochloric acid, and nitric acid. Furthermore, the examination of sulfuric acid concentration shows that an optimal concentration of 0.1 M is the most effective for CV degradation. On the other hand, an increase in the initial concentration of the dye leads to a reduction in the hydroxyl radicals formed (HO•), which negatively impacts CV degradation. A concentration of 10 mg/L of CV gives complete degradation of dye within 30 min following the reaction. Increasing the solution temperature and stirring speed have a negative effect on dye degradation. Moreover, the combination of ultrasound with the Fenton process resulted in a slight enhancement in the CV degradation, with an optimal stirring speed of 300 rpm. Notably, the study incorporates the use of Gaussian process regression (GPR) modeling in conjunction with the Improved Grey Wolf Optimization (IGWO) algorithm to accurately predict the optimal degradation conditions. This research, through its rigorous investigation and advanced modeling techniques, offers invaluable insights and guidelines for optimizing the Fenton process in the context of CV degradation, thereby achieving the twin goals of cost reduction and environmental impact minimization
Evaluating the Effectiveness of Coagulation–Flocculation Treatment Using Aluminum Sulfate on a Polluted Surface Water Source: A Year-Long Study
\ua9 2024 by the authors.Safeguarding drinking water is a major public health and environmental concern because it is essential to human life but may contain pollutants that can cause illness or harm the environment. Therefore, continuous research is necessary to improve water treatment methods and guarantee its quality. As part of this study, the effectiveness of coagulation–flocculation treatment using aluminum sulfate (Al2(SO4)3) was evaluated on a very polluted site. Samplings were taken almost every day for a month from the polluted site, and the samples were characterized by several physicochemical properties, such as hydrogen potential (pH), electrical conductivity, turbidity, organic matter, ammonium (NH+4), phosphate (PO43−), nitrate (NO3−), nitrite (NO2−), calcium (Ca2+), magnesium (Mg2+), total hardness (TH), chloride (Cl−), bicarbonate (HCO3−), sulfate (SO42−), iron (Fe3+), manganese (Mn2+), aluminum (Al3+), potassium (K+), sodium (Na+), complete alkalimetric titration (TAC), and dry residue (DR). Then, these samples were treated with Al2(SO4)3 using the jar test method, which is a common method to determine the optimal amount of coagulant to add to the water based on its physicochemical characteristics. A mathematical model had been previously created using the support vector machine method to predict the dose of coagulant according to the parameters of temperature, pH, TAC, conductivity, and turbidity. This Al2(SO4)3 treatment step was repeated at the end of each month for a year, and a second characterization of the physicochemical parameters was carried out in order to compare them with those of the raw water. The results showed a very effective elimination of the various pollutions, with a very high rate, thus demonstrating the effectiveness of the Al2(SO4)3. The physicochemical parameters measured after the treatment showed a significant reduction in the majority of the physicochemical parameters. These results demonstrated that the coagulation–flocculation treatment with Al2(SO4)3 was very effective in eliminating the various pollutions present in the raw water. They also stress the importance of continued research in the field of water treatment to improve the quality of drinking water and protect public health and the environment
Formyl Peptide Receptor as a Novel Therapeutic Target for Anxiety-Related Disorders
Formyl peptide receptors (FPR) belong to a family of sensors of the immune system that detect microbe-associated molecules and inform various cellular and sensorial mechanisms to the presence of pathogens in the host. Here we demonstrate that Fpr2/3-deficient mice show a distinct profile of behaviour characterised by reduced anxiety in the marble burying and light-dark box paradigms, increased exploratory behaviour in an open-field, together with superior performance on a novel object recognition test. Pharmacological blockade with a formyl peptide receptor antagonist, Boc2, in wild type mice reproduced most of the behavioural changes observed in the Fpr2/3(-/-) mice, including a significant improvement in novel object discrimination and reduced anxiety in a light/dark shuttle test. These effects were associated with reduced FPR signalling in the gut as shown by the significant reduction in the levels of p-p38. Collectively, these findings suggest that homeostatic FPR signalling exerts a modulatory effect on anxiety-like behaviours. These findings thus suggest that therapies targeting FPRs may be a novel approach to ameliorate behavioural abnormalities present in neuropsychiatric disorders at the cognitive-emotional interface
Increased CD8+ T cell responses to apoptotic T cell-associated antigens in multiple sclerosis.
BACKGROUND: Here, we evaluated the hypothesis that CD8(+) T cell responses to caspase-cleaved antigens derived from effector T cells undergoing apoptosis, may contribute to multiple sclerosis (MS) immunopathology. METHODS: The percentage of autoreactive CD8(+) T effector cells specific for various apoptotic T cell-associated self-epitopes (apoptotic epitopes) were detected in the peripheral blood and cerebrospinal fluid (CSF) by both enzyme-linked immunospot and dextramers of class I molecules complexed with relevant apoptotic epitopes. Moreover, the capacity of dextramer(+) CD8(+) T cells to produce interferon (IFN)-γ and/or interleukin (IL)-17 in response to the relevant apoptotic epitopes was evaluated by the intracellular cytokine staining. Cross-presentation assay of apoptotic T cells by dendritic cells was also evaluated ex vivo. RESULTS: We found that polyfunctional (IFN-γ and/or IL-17 producing) autoreactive CD8(+) T cells specific for apoptotic epitopes were represented in MS patients with frequencies significantly higher than in healthy donors. These autoreactive CD8(+) T cells with a strong potential to produce IFN-γ or IL-17 in response to the relevant apoptotic epitopes were significantly accumulated in the CSF from the same patients. In addition, the frequencies of these autoreactive CD8(+) T cells correlated with the disease disability. Cross-presentation assay revealed that caspase-cleaved cellular proteins are required to activate apoptotic epitope-specific CD8(+) T cells ex vivo. CONCLUSION: Taken together, these data indicate that apoptotic epitope-specific CD8(+) T cells with strong inflammatory potential are recruited at the level of the inflammatory site, where they may be involved in MS immunopathology through the production of high levels of inflammatory cytokines
Variation in NOD2 Augments Th2- and Th17 Responses to Myelin Basic Protein in Multiple Sclerosis
Variations in the gene for the nucleotide-binding oligomerisation domain (NOD) 2 have been associated with Crohn's disease but not multiple sclerosis (MS). Here we investigate the effect of three polymorphisms in the NOD2 gene (rs5743277, rs2066842 and rs5743291) on cytokine production and CD4+ T cell proliferation elicited by human myelin basic protein (MBP) in blood mononuclear cell (MNC) cultures from 29 patients with MS. No polymorphism was observed at rs5743277. No associations with the rs2066842 polymorphism were found. Concerning rs5743291, none were homozygous for the minor allele. Seven of 29 (24%) patients were heterozygous, and five of these (71%) exhibited increased MBP-induced CD4+ T cell proliferation versus four of 22 (18%), who were homozygous for the major allele (p<0.04). Interleukin (IL)-5 was induced by MBP in MNC from the same five carriers versus two (9%) homozygotes (p<0.004); four carriers (57%) versus three non-carriers (14%) exhibited IL-17 responses to MBP (p<0.04). By contrast, we found no association between the polymorphisms investigated and interferon-gamma-, tumor necrosis factor-alpha-, IL-2, -4- or IL-10 responses to MBP. These results indicate that the rs5743291 polymorphism influences T helper (Th) cell 2- and Th17 cell responses in MNC from MS patients
A Sequential Targeting Strategy Interrupts AKT-Driven Subclone-Mediated Progression in Glioblastoma
Purpose: Therapy resistance and fatal disease progression in glioblastoma are thought to result from the dynamics of intra-tumor heterogeneity. This study aimed at identifying and molecularly targeting tumor cells that can survive, adapt, and subclonally expand under primary therapy.
Experimental design: To identify candidate markers and to experimentally access dynamics of subclonal progression in glioblastoma, we established a discovery cohort of paired vital cell samples obtained before and after primary therapy. We further used two independent validation cohorts of paired clinical tissues to test our findings. Follow-up preclinical treatment strategies were evaluated in patient-derived xenografts.
Results: We describe, in clinical samples, an archetype of rare ALDH1A1+ tumor cells that enrich and acquire AKT-mediated drug resistance in response to standard-of-care temozolomide (TMZ). Importantly, we observe that drug resistance of ALDH1A1+ cells is not intrinsic, but rather an adaptive mechanism emerging exclusively after TMZ treatment. In patient cells and xenograft models of disease, we recapitulate the enrichment of ALDH1A1+ cells under the influence of TMZ. We demonstrate that their subclonal progression is AKT-driven and can be interfered with by well-timed sequential rather than simultaneous antitumor combination strategy.
Conclusions: Drug-resistant ALDH1A1+/pAKT+ subclones accumulate in patient tissues upon adaptation to TMZ therapy. These subclones may therefore represent a dynamic target in glioblastoma. Our study proposes the combination of TMZ and AKT inhibitors in a sequential treatment schedule as a rationale for future clinical investigation
- …