Treatment Using the SpyGlass Digital System in a Patient with Hepatolithiasis after a Whipple Procedure

An 89-year-old man was referred to our hospital for treatment of hepatolithiasis causing recurrent cholangitis. He had undergone a prior Whipple procedure. Computed tomography demonstrated left-sided hepatolithiasis. First, we conducted peroral direct cholangioscopy (PDCS) using an ultraslim endoscope. Although PDCS was successfully conducted, it was unsuccessful in removing all the stones. The stones located in the B2 segment were difficult to remove because the endoscope could not be inserted deeply into this segment due to the small size of the intrahepatic bile duct. Next, we substituted the endoscope with an upper gastrointestinal endoscope. After positioning the endoscope, the SpyGlass digital system (SPY-DS) was successfully inserted deep into the B2 segment. Upon visualizing the residual stones, we conducted SPY-DS-guided electrohydraulic lithotripsy. The stones were disintegrated and completely removed. In cases of PDCS failure, a treatment strategy using the SPY-DS can be considered for patients with hepatolithiasis after a Whipple procedure

Research and Design of a Routing Protocol in Large-Scale Wireless Sensor Networks

无线传感器网络，作为全球未来十大技术之一，集成了传感器技术、嵌入式计算技术、分布式信息处理和自组织网技术，可实时感知、采集、处理、传输网络分布区域内的各种信息数据，在军事国防、生物医疗、环境监测、抢险救灾、防恐反恐、危险区域远程控制等领域具有十分广阔的应用前景。 本文研究分析了无线传感器网络的已有路由协议，并针对大规模的无线传感器网络设计了一种树状路由协议，它根据节点地址信息来形成路由，从而简化了复杂繁冗的路由表查找和维护，节省了不必要的开销，提高了路由效率，实现了快速有效的数据传输。 为支持此路由协议本文提出了一种自适应动态地址分配算——ADAR（AdaptiveDynamicAddre...As one of the ten high technologies in the future, wireless sensor network, which is the integration of micro-sensors, embedded computing, modern network and Ad Hoc technologies, can apperceive, collect, process and transmit various information data within the region. It can be used in military defense, biomedical, environmental monitoring, disaster relief, counter-terrorism, remote control of haz...学位：工学硕士院系专业：信息科学与技术学院通信工程系_通信与信息系统学号：2332007115216

Invasive inflammatory fibroid polyp of the stomach: a case report and literature review

Abstract Background Inflammatory fibroid polyps (IFPs) are rare mesenchymal lesions that affect the gastrointestinal tract. IFPs are generally considered benign, noninvasive lesions; however, we report a case of an invasive gastric IFP. To the best of our knowledge, this is only the second case report of an invasive gastric IFP. Case presentation A 62-year-old woman presented with complaints of epigastric pain and vomiting. Computed tomography showed a 27-mm, hyper-enhancing tumor in the prepyloric antrum. Upper endoscopy also showed a submucosal tumor causing subtotal obstruction of the gastric outlet. Because a gastrointestinal stromal tumor was suspected, distal gastrectomy was performed. Histopathological examination revealed spindle cell proliferation in the submucosal layer. The spindle cells had invaded the muscularis propria layer and extended to the subserosal layer. The tumor was finally diagnosed as an IFP based on immunohistochemical findings. No mutations were identified in the platelet-derived growth factor receptor alpha (PDGFRA) gene via molecular genetic analysis. Discussion and conclusions After the discovery that IFPs often harbor PDGFRA mutations, these growths have been considered neoplastic lesions rather than reactive lesions. Based on the present case, IFPs might be considered not only neoplastic but also potentially invasive lesions

ILC Reference Design Report Volume 1 - Executive Summary

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization

ILC Reference Design Report Volume 4 - Detectors

This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics.This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics

ILC Reference Design Report Volume 3 - Accelerator

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC