Growth of vertically aligned Si wire arrays over large areas (>1 cm^2) with Au and Cu catalysts

Arrays of vertically oriented Si wires with diameters of 1.5 µm and lengths of up to 75 µm were grown over areas >1 cm^2 by photolithographically patterning an oxide buffer layer, followed by vapor-liquid-solid growth with either Au or Cu as the growth catalyst. The pattern fidelity depended critically on the presence of the oxide layer, which prevented migration of the catalyst on the surface during annealing and in the early stages of wire growth. These arrays can be used as the absorber material in novel photovoltaic architectures and potentially in photonic crystals in which large areas are needed

Secondary ion mass spectrometry of vapor−liquid−solid grown, Au-catalyzed, Si wires

Knowledge of the catalyst concentration within vapor-liquid-solid (VLS) grown semiconductor wires is needed in order to assess potential limits to electrical and optical device performance imposed by the VLS growth mechanism. We report herein the use of secondary ion mass spectrometry to characterize the Au catalyst concentration within individual, VLS-grown, Si wires. For Si wires grown by chemical vapor deposition from SiCl_4 at 1000 °C, an upper limit on the bulk Au concentration was observed to be 1.7 x 10^16 atoms/cm^3, similar to the thermodynamic equilibrium concentration at the growth temperature. However, a higher concentration of Au was observed on the sidewalls of the wires

High Aspect Ratio Silicon Wire Array Photoelectrochemical Cells

In an effort to develop low-cost solar energy conversion techniques, high uniformity vertically oriented silicon wire arrays have been fabricated. These arrays, which allow for radial diffusion of minority charge carriers, have been measured in a photoelectrochemical cell. Large photovoltages (∼400 mV) have been measured, and these values are significantly greater than those obtained from the substrate alone. Additionally, the wire array samples displayed much higher current densities than the underlying substrate, demonstrating that significant energy conversion was occurring due to the absorption and charge-carrier transport in the vertically aligned Si wires. This method therefore represents a step toward the use of collection-limited semiconductor materials in a wire array format in macroscopic solar cell devices

Low-cost rapid detection of rifampicin resistant tuberculosis using bacteriophage in Kampala, Uganda

BACKGROUND: Resistance to anti-tuberculosis drugs is a serious public health problem. Multi-drug resistant tuberculosis (MDR-TB), defined as resistance to at least rifampicin and isoniazid, has been reported in all regions of the world. Current phenotypic methods of assessing drug susceptibility of M. tuberculosis are slow. Rapid molecular methods to detect resistance to rifampicin have been developed but they are not affordable in some high prevalence countries such as those in sub Saharan Africa. A simple multi-well plate assay using mycobacteriophage D29 has been developed to test M. tuberculosis isolates for resistance to rifampicin. The purpose of this study was to investigate the performance of this technology in Kampala, Uganda. METHODS: In a blinded study 149 M. tuberculosis isolates were tested for resistance to rifampicin by the phage assay and results compared to those from routine phenotypic testing in BACTEC 460. Three concentrations of drug were used 2, 4 and 10 μg/ml. Isolates found resistant by either assay were subjected to sequence analysis of a 81 bp fragment of the rpoB gene to identify mutations predictive of resistance. Four isolates with discrepant phage and BACTEC results were tested in a second phenotypic assay to determine minimal inhibitory concentrations. RESULTS: Initial analysis suggested a sensitivity and specificity of 100% and 96.5% respectively for the phage assay used at 4 and 10 μg/ml when compared to the BACTEC 460. However, further analysis revealed 4 false negative results from the BACTEC 460 and the phage assay proved the more sensitive and specific of the two tests. Of the 39 isolates found resistant by the phage assay 38 (97.4%) were found to have mutations predictive of resistance in the 81 bp region of the rpoB gene. When used at 2 μg/ml false resistant results were observed from the phage assay. The cost of reagents for testing each isolate was estimated to be 1.3US$ when testing a batch of 20 isolates on a single 96 well plate. Results were obtained in 48 hours. CONCLUSION: The phage assay can be used for screening of isolates for resistance to rifampicin, with high sensitivity and specificity in Uganda. The test may be useful in poorly resourced laboratories as a rapid screen to differentiate between rifampicin susceptible and potential MDR-TB cases

Comparison of rapid tests for detection of rifampicin-resistant Mycobacterium tuberculosis in Kampala, Uganda

BACKGROUND: Drug resistant tuberculosis (TB) is a growing concern worldwide. Rapid detection of resistance expedites appropriate intervention to control the disease. Several technologies have recently been reported to detect rifampicin resistant Mycobacterium tuberculosis directly in sputum samples. These include phenotypic culture based methods, tests for gene mutations and tests based on bacteriophage replication. The aim of the present study was to assess the feasibility of implementing technology for rapid detection of rifampicin resistance in a high disease burden setting in Africa. METHODS: Sputum specimens from re-treatment TB patients presenting to the Mulago Hospital National TB Treatment Centre in Kampala, Uganda, were examined by conventional methods and simultaneously used in one of the four direct susceptibility tests, namely direct BACTEC 460, Etest, "in-house" phage test, and INNO- Rif.TB. The reference method was the BACTEC 460 indirect culture drug susceptibility testing. Test performance, cost and turn around times were assessed. RESULTS: In comparison with indirect BACTEC 460, the respective sensitivities and specificities for detecting rifampicin resistance were 100% and 100% for direct BACTEC and the Etest, 94% and 95% for the phage test, and 87% and 87% for the Inno-LiPA assay. Turn around times ranged from an average of 3 days for the INNO-LiPA and phage tests, 8 days for the direct BACTEC 460 and 20 days for the Etest. All methods were faster than the indirect BACTEC 460 which had a mean turn around time of 24 days. The cost per test, including labour ranged from $18.60 to$41.92 (USD). CONCLUSION: All four rapid technologies were shown capable of detecting rifampicin resistance directly from sputum. The LiPA proved rapid, but was the most expensive. It was noted, however, that the LiPA test allows sterilization of samples prior to testing thereby reducing the risk of accidental laboratory transmission. In contrast the Etest was low cost, but slow and would be of limited assistance when treating patients. The phage test was the least reproducible test studied with failure rate of 27%. The test preferred by the laboratory personnel, direct BACTEC 460, requires further study to determine its accuracy in real-time treatment decisions in Uganda

The Socio-economic Impacts of Social Media Privacy and Security Challenges

© 2020, Springer Nature Singapore Pte Ltd. Privacy and Security are two major challenges faced by users on social media today. These challenges are experienced in diverse ways and forms by different types of users across the web. While technological solutions are usually implemented to address them, the effects have proven to be limited so far. Despite continuous deployment of technological solutions, the need to evaluate socio-economic impacts of these challenges have also become more imperative. Hence, this paper provides a critical review and analysis of socio-economic impacts of these social media challenges. The research findings reveal significant levels of negative socio-economic impacts and provides an evaluation framework towards defining the scope, thereby identifying appropriate measures for both addressing the challenges and curbing the socio-economic impacts. The findings also demonstrate the need for solutions beyond the use of technology, to employing and deploying solutions from social sciences which deals with behavioral issues and how to address them