1,033 research outputs found

    Evolution of laser welding to dissimilar materials joining

    Full text link

    Widefield multifrequency fluorescence lifetime imaging using a two-tap complementary metal-oxide semiconductor camera with lateral electric field charge modulators.

    Get PDF
    Widefield frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) measures the fluorescence lifetime of entire images in a fast and efficient manner. We report a widefield FD-FLIM system based on a complementary metal-oxide semiconductor camera equipped with two-tap true correlated double sampling lock-in pixels and lateral electric field charge modulators. Owing to the fast intrinsic response and modulation of the camera, our system allows parallel multifrequency FLIM in one measurement via fast Fourier transform. We demonstrate that at a fundamental frequency of 20 MHz, 31-harmonics can be measured with 64 phase images per laser repetition period. As a proof of principle, we analyzed cells transfected with Cerulean and with a construct of Cerulean-Venus that shows Förster Resonance Energy Transfer at different modulation frequencies. We also tracked the temperature change of living cells via the fluorescence lifetime of Rhodamine B at different frequencies. These results indicate that our widefield multifrequency FD-FLIM system is a valuable tool in the biomedical field

    Innovation of laser direct joining between metal and plastic

    Full text link

    Ionization and acceleration of multiply charged gold ions in solid film irradiated by high intensity laser

    Get PDF
    In this paper, we present the mechanisms of ionization of a thin gold film irradiated by a high-intensity, short-pulse laser in the range of I=10²⁰⁻²² W/cm² and the associated acceleration of multiply charged gold ions. A numerical one-dimensional simulation using an extended particle-in-cell code, which includes atomic and collisional relaxation processes, indicates that two types of acceleration, hole-boring radiation pressure acceleration (RPA) and target normal sheath acceleration (TNSA), contribute to the generation of highly charged ions with kinetic energies on the order of 10 MeV/u. In each acceleration, a longitudinal electrostatic field excited by different mechanisms dominantly ionizes atoms to higher charge states and accelerates them to the vacuum region from the rear surface, which is opposite the front surface irradiated by the laser field. The field ionization process dominantly ionizes high energy ions to the high charge state, while a large number of ions with energy <1 MeV/u are ionized by an electron impact ionization process. In TNSA, a multiply charged ion generated at the rear surface is accelerated to the maximum energy although the ion with the highest charge state is generated at the front surface in RPA. However, the existence of contamination, such as water vapor, suppresses the ion energy of TNSA to less than that of RPA since the sheath field readily accelerates the protons and oxygen prior to the acceleration of the gold ions. Our derived theoretical scaling describes the maximum ion energy for each charge state in the cases with and without contamination using the relationship between the longitudinal electrostatic field profile near the rear surface and the classical tunnel field ionization model

    High brightness laser cutting of CFRP

    Full text link

    Metal Hydride-Based Materials as Negative Electrode for All- Solid-State Lithium-Ion Batteries

    Get PDF
    The recently developed metal hydride (MH)-based material is considered to be a potential negative material for lithium-ion batteries, owing to its high theoretical Li storage capacity, relatively low volume expansion, and suitable working potential with very small polarization. However, it suffers from the slow kinetics, poor reversibility, and unfavourable cyclability in conventional organic liquid electrolyte systems, which enormously limit its practical application. In this chapter, we describe an all-solid-state battery system consisting of MH working electrode, LiBH4 solid electrolyte, and Li metal counter electrode. The electrochemical properties of MgH2 and TiH2 composites are investigated, which showed much better performances using LiBH4 as solid-state electrolyte than using conventional organic liquid electrolyte

    Development of a real-time full-field range imaging system

    Get PDF
    This article describes the development of a full-field range imaging system employing a high frequency amplitude modulated light source and image sensor. Depth images are produced at video frame rates in which each pixel in the image represents distance from the sensor to objects in the scene. The various hardware subsystems are described as are the details about the firmware and software implementation for processing the images in real-time. The system is flexible in that precision can be traded off for decreased acquisition time. Results are reported to illustrate this versatility for both high-speed (reduced precision) and high-precision operating modes
    corecore