130 research outputs found
Tribocorrosion Properties of PEO Coatings Produced on AZ91 Magnesium Alloy with Silicate- or Phosphate-Based Electrolytes
In this work, the tribocorrosion behavior of plasma electrolytic oxidation (PEO)-coated AZ91 samples was studied. In particular, two different coatings were produced and compared. One was obtained with an alkaline electrolyte containing sodium phosphate, whereas the other one was produced with an alkaline electrolyte containing sodium silicate. The coatings were characterized with SEM-EDS and XRD techniques, and after the tribocorrosion tests, the wear scars were analyzed with SEM-EDS. The tribocorrosion behavior was evaluated measuring the OCP during a pin on disk test performed in an aggressive environment. Moreover, potentiodynamic polarization and electrochemical impedance spectroscopy tests were performed, to evaluate the corrosion resistance of the different samples in the absence of wear phenomena. The behavior of all the PEO-treated specimens was compared with the one of the untreated sample. A remarkable increase in the tribocorrosion performances after the PEO treatments was observed. Moreover, the samples obtained with the electrolyte containing silicates showed higher tribocorrosion performances
Self-assembling peptide-enriched electrospun polycaprolactone scaffolds promote the h-osteoblast adhesion and modulate differentiation-associated gene expression
Electrospun polycaprolactone (PCL) is able to support the adhesion and growth of h-osteoblasts and to delay their degradation rate to a greater extent with respect to other polyesters. The drawbacks linked to its employment in regenerative medicine arise fromits hydrophobic nature and the lack of biochemical signals linked to it. This work reports on the attempt to add five different self-assembling (SA) peptides to PCL solutions before electrospinning. The hybrid scaffolds obtained had regular fibers (SEM analysis) whose diameters were similar to those of the extracellularmatrix, more stable hydrophilic (contact angle measurement) surfaces, and anamorphous phase constrained by peptides (DSC analysis). They appeared to have a notable capacity to promote the h-osteoblast adhesion and differentiation process by increasing the gene expression of alkaline phosphatase, bone sialoprotein, and osteopontin. Adding an Arg-Gly-Asp (RGD) motif to a self-assembling sequence was found to enhance cell adhesion, while the same motif condensed with a scrambled sequence did not, indicating that there is a cooperative effect between RGD and 3D architecture created by the self-assembling peptides. The study demonstrates that self-assembling peptide scaffolds are still able to promote beneficial effects on h-osteoblasts even after they have been included in electrospun polycaprolactone. The possibility of linking biochemical messages to self-assembling peptides could lead the way to a 3D decoration of fibrous scaffolds
Microstructural and Corrosion Properties of PEO Coated Zinc-Aluminized (ZA) Steel
Plasma Electrolytic Oxidation (PEO) is a surface treatment, similar to anodizing, that produces thick oxide films on the surface of metals. In the present work, PEO coatings were obtained on zinc-aluminized (ZA) carbon steel using a solution containing sodium silicate and potassium hydroxide as electrolyte, and working with high current densities and short treatment times in Direct Current (DC) mode. The thickness of the coating, as well as the surface morphology, were strongly influenced by the process parameters, with different dissolution grades of the ZA layer depending on the current density and treatment time. A compromise between thickness and porosity of the coating was found with low current density/long treatment time or high current density/short treatment time. The PEO layer was mainly composed of aluminum oxides and silicon compounds. The corrosion resistance increased remarkably in the samples with the PEO coating. These PEO coated samples are suitable for sealing treatments that further increase their corrosion properties or will be also an ideal substrate for commercial painting, assuring improved mechanical adhesion and protection even in the presence of damages
Hydrometallurgical process with ultrasound for zinc and iron recovery from electric arc furnace dust,
Indurimento superficiale di leghe di titanio mediante trattamenti termici di diffusione di Ni
Indurimento superficiale di leghe di titanio mediante trattamenti termici di diffusione di Ni
Ultrasound assisted leaching synthesis of Fe and ZnO nanoparticles from solution of EAF dust leaching
Recupero di zinco e ferro da polveri di EAF mediante processi idrometallrgici con l’ausilio di ultrasuoni
- …