103 research outputs found
A lepkész Schmidt Antal (1880–1966): a muzeológus és az igazgató öröksége a Magyar Természettudományi Múzeumban = The lepidopterist Dr. Antal Schmidt (1880–1966): his legacy as curator and director in the Hungarian Natural History Museum
Dr Antal Schmidt, lepidopterist by scientifi c interest, worked as staff member of the Hungarian Natural History Museum between the period 1903–1939. Personal data of Schmidt are given, with a list of all his 22 publications and 25 Lepidoptera names proposed as new for science.
On the basis of archive records and documents the alphabetic list of 598 personalities he corresponded with is also compiled indicating the intensity of letter exchange. People whom Schmidt
was in most intensive contact with, are briefl y presented. With 12 fi gures
Kerámiagömbhéjakkal töltött szintaktikus fémhabok kvázistatikus és nagy alakváltozási sebességű nyomóvizsgálata
Cikkünkben a szintaktikus fémhabok nyomásra adott válaszával foglalkozunk. A vizsgálatainkban összesen négy különböző mátrixanyagú kerámia gömbhéjakkal töltött szintaktikus fémhabot zömítettünk. A különböző alapanyagú és különböző hőkezeltségi állapotú próbatesteket kvázi-statikus nyomóvizsgálatoknak és nagy alakváltozási sebességű vizsgálatoknak vetettük alá. Az eredmények alapján a mátrixanyag kémiai összetétele és hőkezeltségi állapota jelentősen befolyásolja a vizsgált fémhab nyomószilárdsági tulajdonságait. A vizsgált anyag nyomószilárdsága kevésbé függ az alakváltozás sebességétől, szemben a szerkezeti merevséggel, illetve a törési alakváltozással. A habok tönkremeneteli módjai között jelentős különbség mutatkozott a kvázi-statikus illetve a nagy alakváltozási sebességű mérések esetén
Butterfly and skipper records from Lebanon (Lepidoptera: Papilionoidea)
Eighty-five specimens of 30 papilionoid species have been collected in Lebanon during entomological expeditions launched in 2015 and 2016 by the joint project of the Hungarian Natural History Museum and the Holy Spirit University of Kaslik. Th e collecting sites and events are listed, and the species annotated. With 23 figures
Description of two new species of the groundstreak genus Arzecla Duarte et Robbins, 2010 (Lepidoptera: Lycaenidae: Theclinae: Eumaeini) from Colombia = Описание двух новых видов рода Arzecla Duarte et Robbins, 2010 (Lepidoptera: Lycaenidae: Theclinae: Eumaeini) из Колумбии
Two species of Arzecla Duarte et Robbins,
2010 are described from Colombia, namely: Arzecla
straboris Bálint, sp. n. (type locality: El Aguila, Manizales,
Caldas), and Arzecla straelena Bálint, sp. n. (type locality:
Cerro Ingrumá, Riosucio, Caldas), both on the basis of a
single male specimen. New species possess a combination of characters, unique in the genus, hence they are easy to identify. A checklist with biogeographic and country indications and a key for identification based on wing characters for all described Arzecla species is provided. Specimens examined for comparative purpose are listed as an Appendix. Eleven figures
Fatigue properties of metal matrix syntactic foams
Closed cell, high strength metallic foams, like ceramic
hollow sphere reinforced metal matrix
syntactic foams are distinguished materials to build light
structural parts. The applications can
range from load bearing structures to vibration damping
structural parts like machine beds, spindles
etc. In the latter case the fatigue properties are necessary
in order to conduct proper design
calculations. Simple and hybrid metal matrix syntactic foams
with Al99.5 or AlSi12 matrix,
reinforced by 1.5 mm and/or 0.15 mm ceramic hollow spheres
were produced by pressure
infiltration technique. The hollow spheres were built up from
alumina, silica and mullite and they
were provided by Globomet GmbH. and Envirospheres Ltd.
respectively. The fatigue tests were
performed on a universal hydraulic testing machine under
force control at different and lower
loading levels (k=0.6…1, compared to the compressive strength
of the actual foams). The
cylindrical specimens were carefully lubricated and placed
between polished plates incorporated in
a four bar upsetting tool. The deformation of the specimens
was measured by a strain gage as a
function of cycles. The results showed that the metal matrix
syntactic foams have exhibited fatigue
limits, due to the high ceramic sphere content. The softer,
more ductile Al99.5 matrix syntactic
foams have higher fatigue strength and similarly, the larger
hollow spheres could result in higher
fatigue limits. The failure mechanism could be connected to
the brittle fracture of ceramic spheres
embedded in the ductile matrix. Light microscopy revealed the
breakage of the spheres in a plane
closing ~45°with the loading direction. Due to this
microcracks appeared in the most stressed
region. Subsequently the cracks were propagated continuously
and finally the whole specimen
fractured. The foams exhibited high damage tolerance and
remained undamaged far from the crack
plane
Kerámia gömbhéjjal töltött szintaktikus fémhabok törésmechanikai vizsgálata
A fémmátrixú szintaktikus fémhabok számos terülten alkalmazhatóak: légi járművek vagy autóipari ütköző zónák energiaelnyelő elemeiként, védőburkolatokként. Jelen kutatómunka kerámia gömbhéjakkal töltött Al99,5 és AlSi12 mátrixú szintaktikus fémhabok törésmechanikai méréstechnikájával foglalkozik. Munkánk során bemetszett próbatesteket vetettünk alá 3-pontos hajlító vizsgálatnak, amelyből repedéskinyílás-nyomóerő görbéket kaptunk. Az eredményeket kiértékelve KQ (bizonyos feltételekkel KIC) meghatározható az adott anyagokra
Fémmátrixú szintaktikus fémhabok fáradási tulajdonságai
Cikkünkben a szintaktikus fémhabok fáradási tulajdonságaival foglalkozunk. A kísérleti úton előállított Al99,5 vagy AlSi12 mátrixú, vegyesoxid kerámia összetételű gömbhéjakkal erősített szintaktikus fémhabokból kimunkált hengeres próbatesteken végeztünk fárasztóvizsgálatokat különböző terhelési tényezőjű (k= σmax / σt, ahol σmax a terhelési ciklus maximuma, σt pedig a szintaktikus fémhab törési szilárdsága) lüktető nyomó igénybevétellel. A vizsgálatok során rögzített, három részre bontható deformáció-ciklusszám görbék szakaszai sorrendben gyors deformációnövekedést, majd hosszú stagnálást és ismét gyors deformációnövekedést mutatnak, ami megfelelő terhelési szint esetén a próbatest töréséhez vezet. A vizsgálati eredményekből megállapítható, hogy a mátrixanyagnak döntő hatása van a szintaktikus fémhabok adott terhelési szint mellett várható törési ciklusszámára. A különböző mátrixanyagú próbatestek esetében a törési ciklusszámban jelentkező különbség a terhelési szint csökkenésével nő. A mátrixanyag a szintaktikus fémhabok tönkremeneteli módját is jelentősen befolyásolja, ami függ a mátrixanyag folyáshatára és a kerámia gömbhéjak törőszilárdsága közötti kapcsolattól
Anodisation of medical grade titanium
In recent years the number of titanium dental implants in use has significantly increased. At the same time bacterial infection of implants has become more common. The goal of our study was to develop a titanium-dioxide layer on the surface of titanium implant materials by anodisation with a view to impeding the attachment of contagious bacteria. In our experiments Grade 2 titanium and nanograin Grade 2 titanium discs were subjected to anodisation. We investigated the effect of voltage on the surface pattern of emerging titanium-dioxide. We examined the surfaces by reflected-light microscopy. We found that the value of the applied voltage and variation in grain size affected the thickness of the formed titanium-dioxide layer. These layers may promote or support desired forms of biological activity, such as cell attachment to integrate with bone
- …