Temperature-Induced Shape Memory Characteristics of Epoxy Resin-Based Fabric-Reinforced Composites

Shape memory characteristics of woven glass and carbon fiber fabric reinforced epoxy resin-based composites were assessed in bending mode using a dynamic mechanical analyzer. The reinforcement strongly improved the recovery stress but impaired the bending deformability. Composites with asymmetric fabric lay-up showed better performance when the reinforced section experienced local tension than compression during flexural loading

Shape memory performance of asymmetrically reinforced epoxy/carbon fibre fabric composites in flexure

In this study asymmetrically reinforced epoxy (EP)/carbon fibre (CF) fabric composites were prepared and their shape memory properties were quantified in both unconstrained and fully constrained flexural tests performed in a dynamic mechanical analyser (DMA). Asymmetric layering was achieved by incorporating two and four CF fabric layers whereby setting a resin- and reinforcement-rich layer ratio of 1/4 and 1/2, respectively. The recovery stress was markedly increased with increasing CF content. The related stress was always higher when the CF-rich layer experienced tension load locally. Specimens with CF-rich layers on the tension side yielded better shape fixity ratio, than those with reinforcement layering on the compression side. Cyclic unconstrained shape memory tests were also run up to five cycles on specimens having the CF-rich layer under local tension. This resulted in marginal changes in the shape fixity and recovery ratios

Shape memory performance of epoxy resin-based composites

One - way shape memory (SM) epoxy resin (SMEP) based systems and composites ha ve been produced and characterized. Incorporation of different reinforcements along with their positioning were used to improve the recovery stress of the corresponding systems. Attempt was made to provide SMEPs with additional functionalities, such as sel fhealing

Biodegradable polyester-based shape memory polymers: Concepts of (supra)molecular architecturing

Shape memory polymers (SMPs) are capable of memorizing one or more temporary shapes and recovering to the permanent shape upon an external stimulus that is usually heat. Biodegradable polymers are an emerging family within the SMPs. This minireview delivers an overlook on actual concepts of molecular and supramolecular architectures which are followed to tailor the shape memory (SM) properties of biodegradable polyesters. Because the underlying switching mechanisms of SM actions is either related to the glass transition (Tg) or melting temperatures (Tm), the related SMPs are classified as Tg- or Tm-activated ones. For fixing of the permanent shape various physical and chemical networks serve, which were also introduced and discussed. Beside of the structure developments in one-way, also those in two-way SM polyesters were considered. Adjustment of the switching temperature to that of the human body, acceleration of the shape recovery, enhancement of the recovery stress, controlled degradation, and recycling aspects were concluded as main targets for the future development of SM systems with biodegradable polyesters

Review of Progress in Shape Memory Epoxies and Their Composites

Shape memory polymer (SMP) is capable of memorizing one or more temporary shapes and recovering successively to the permanent shape upon various external stimuli. Beside of the above mentioned one-way variants, also two-way shape memory polymers (SMPs) and shape memory (SM) systems exist which feature a reversible shape change on the basis of “on-off switching” of the external stimulus. The preparation, properties and modelling of shape memory epoxy resins (SMEP), SMEP foams and composites have been surveyed in this exhaustive review article. The underlying mechanisms and characteristics of SM were introduced. Emphasis was put to show new strategies on how to tailor the network architecture and morphology of EPs to improve their SM performance. To produce SMEPs novel preparation techniques, such as electrospinning, ink printing, solid-state foaming, were tried. The potential of SMEPs and related systems as multifunctional materials has been underlined. Added functionality may include, among others, self-healing, sensing, actuation, porosity control, recycling. Recent developments in the modelling of SMEPs were also highlighted. Based on the recent developments some open topics were deduced which are merit of investigations in future works