Carbon Nanotubes Encapsulating Superconducting Single-Crystalline Tin Nanowires

Superconducting low dimensional systems are the natural choice for fast and sensitive infrared detection, because of their quantum nature and the low-noise, cryogenic operation environment. On the other hand, monochromatic and coherent electron beams, emitted from superconductors and carbon-based nanostructured materials, respectively, are significant for the development of electron optical systems such as electron microscopes and electron-beam nanofabrication systems. Here we describe for the first time a simple method which yields carbon nanotubes encapsulating single crystalline superconducting tin nanowires by employing the catalytic chemical vapor deposition method over solid tin dioxide. The superconducting tin nanowires, with diameters 15-35 nm, are covered with well-graphitized carbon walls and show, due to their reduced diameters, a critical magnetic field (Hc) more than 30 times higher than the value of bulk metallic tin.

Carbon nanostructures derived through hypergolic reaction of conductive polymers with fuming nitric acid at ambient conditions

Hypergolic systems rely on organic fuel and a powerful oxidizer that spontaneously ignites upon contact without any external ignition source. Although their main utilization pertains to rocket fuels and propellants, it is only recently that hypergolics has been established from our group as a new general method for the synthesis of different morphologies of carbon nanostructures depending on the hypergolic pair (organic fuel-oxidizer). In search of new pairs, the hypergolic mixture described here contains polyaniline as the organic source of carbon and fuming nitric acid as strong oxidizer. Specifically, the two reagents react rapidly and spontaneously upon contact at ambient conditions to afford carbon nanosheets. Further liquid-phase exfoliation of the nanosheets in dimethylformamide results in dispersed single layers exhibiting strong Tyndall effect. The method can be extended to other conductive polymers, such as polythiophene and polypyrrole, leading to the formation of different type carbon nanostructures (e.g., photolumincent carbon dots). Apart from being a new synthesis pathway towards carbon nanomaterials and a new type of reaction for conductive polymers, the present hypergolic pairs also provide a novel set of rocket bipropellants based on conductive polymers.Web of Science266art. no. 159

Microwave synthesis, characterization and perspectives of wood pencil-derived carbon

More than 14 billion pencils are manufactured and used globally every year. On average, a pencil is discarded after 60% of its original length has been depleted. In the present work we propose a simple and affordable way of converting this non-neglectable amount of waste into added value carbon product. In particular, we demonstrate the microwave synthesis of carbon from the wood pencil with and without chemical activation. This could be a process stage before the final recycling of the expensive graphite core. In the latter case, irradiation of the wood pencil in a domestic microwave oven heats up the pencil's graphite core, thus inducing carbonization of its wood casing. The carbonized product consists of amorphous carbon nanosheets having relatively low surface area. However, if the wood pencil is soaked in 50% KOH aqueous solution prior to microwave irradiation, a significantly higher surface area of carbon is obtained, consisting of irregular-shaped porous particles. Consequently, the obtained carbon can easily decolorize a methylene blue aqueous solution, can be used to make pocket warmers or gunpowder, and lastly, serves as an excellent adsorbent towards Cr(VI) removal from water, showing a maximum adsorption capacity of 70-75 mg/g within 24 h at 23 degrees C, pH = 3.Web of Science121art. no. 41

Carbon Nanotubes Encapsulating Superconducting Single-Crystalline Tin Nanowires. Nano Lett

ABSTRACT Superconducting low dimensional systems are the natural choice for fast and sensitive infrared detection, because of their quantum nature and the low-noise, cryogenic operation environment. On the other hand, monochromatic and coherent electron beams, emitted from superconductors and carbon-based nanostructured materials, respectively, are significant for the development of electron optical systems such as electron microscopes and electron-beam nanofabrication systems. Here we describe for the first time a simple method which yields carbon nanotubes encapsulating single crystalline superconducting tin nanowires by employing the catalytic chemical vapor deposition method over solid tin dioxide. The superconducting tin nanowires, with diameters 15−35 nm, are covered with well-graphitized carbon walls and show, due to their reduced diameters, a critical magnetic field (H c ) more than 30 times higher than the value of bulk metallic tin. The hot-electron phenomena in low-dimensional superconducting systems are of fundamental importance for high energy resolution bolometers. 1 Photon absorption in a superconducting detector creates an avalanche electron charge, 2 or 3 orders of magnitude higher than that in a semiconductor for the same photon energy. This results in an enhanced resolution in energy-resolving devices, such as superconducting tunnel junctions, 2 and extends the range of detectable energies

Nanoporous Carbon Magnetic Hybrid Derived from Waterlock Polymers and Its Application for Hexavalent Chromium Removal from Aqueous Solution

Sodium polyacrylate is the superabsorbent waterlock polymer used in disposable diapers, which are the third largest single consumer item in landfills. As diapers are difficult to recycle, their use produces an incredible amount of environmental waste. In the present article, we present a reliable and facile approach to transform sodium polyacrylate, the main constitute in the used diapers, in a carbon-based magnetic sorbent material, capable for use in environmental applications. A nanoporous carbon magnetic hybrid material was prepared by reacting NaPA with iron acetate species under chemical activation conditions. Analysis of the characterization results revealed, the creation of a nanoporous structure, with high specific surface area value (SgBET = 611 m2/g), along with the formation of nanosized zero valent iron nanoparticles and iron carbide (Fe3C), inside the carbon pore system. 57Fe Mössbauer spectroscopy verified also the existence of these two main iron-bearing phases, as well as additional minor magnetic phases, such as Fe3O4 and γ-Fe2O3. Vibrating sample magnetometry (VSM) measurements of the obtained hybrid confirmed its ferromagnetic/ferrimagnetic behavior. The hybrid material demonstrated a rapid sorption of Cr(VI) ions (adsorption capacity: 90 mg/g, 24 h, pH = 3). The results showed highly pH-dependent sorption efficiency of the hybrids, whereas a pseudo-second-order kinetic model described their kinetics

Use of a Hybrid Porous Carbon Material Derived from Expired Polysaccharides Snack/Iron Salt Exhibiting Magnetic Properties, for Hexavalent Chromium Removal

Nowadays, the scientific interest is focused more and more on the development of new strategies in recycling of waste products as well as on the development of clean technologies due to the increased environmental pollution. In this work we studied the valorization of an expired cheese-tomato flavor corn snack, which is polysaccharide food product, by producing advanced hybrid magnetic materials for environmental remediation purposes. The carbonization-chemical activation of this snack using potassium hydroxide leads to a microporous activated carbon with high surface area (SgBET ~800 m2/g). The magnetic hybrid material was synthesized via an in-situ technique using iron acetate complex as the precursor to produce iron based magnetic nanoparticles. The resulting material retains a fraction of the microporous structure with surface area SgBET ~500 m2/g. Such material consists, of homogenously dispersed magnetic isolated zero valent iron nanoparticles and of iron carbides (Fe3C), into the carbon matrix. The magnetic carbon exhibited high adsorption capacity in Cr(VI) removal applications following a pseudosecond order kinetic model. The maximum adsorption capacity was 88.382 mgCr(VI)/gAC at pH = 3. Finally, oxidation experiments, in combination with FT-IR, Mössbauer, and VSM measurements indicated that the possible Cr6+ removal mechanism involves oxidation of iron phases and reduction of Cr6+ to Cr3+

Hypergolic Synthesis of Inorganic Materials by the Reaction of Metallocene Dichlorides with Fuming Nitric Acid at Ambient Conditions: The Case of Photocatalytic Titania

Hypergolic materials synthesis is a new preparative technique in materials science that allows a wide range of carbon or inorganic solids with useful properties to be obtained. Previously we have demonstrated that metallocenes are versatile reagents in the hypergolic synthesis of inorganic materials, such as γ-Fe2O3, Cr2O3, Co, Ni and alloy CoNi. Here, we go one step further by using metallocene dichlorides as precursors for the hypergolic synthesis of additional inorganic phases, such as photocatalytic titania. Metallocene dichlorides are closely related to metallocenes, thus expanding the arsenal of organometallic compounds that can be used in hypergolic materials synthesis. In the present case, we show that hypergolic ignition of the titanocene dichloride–fuming nitric acid pair results in the fast and spontaneous formation of titania nanoparticles at ambient conditions in the form of anatase–rutile mixed phases. The obtained titania shows good photocatalytic activity towards Cr(VI) removal (100% within 9 h), with the latter being dramatically enhanced after calcination of the powder at 500 °C (100% within 3 h). Notably, this performance was found to be comparable to that of commercially available P25 TiO2 under identical conditions. The cases of zirconocene, hafnocene and molybdocene dichlorides are discussed in this work, which aims to show the wider applicability of metallocene dichlorides in the hypergolic synthesis of inorganic materials (ZrO2, HfO2, MoO2)

Use of a Hybrid Porous Carbon Material Derived from Expired Polysaccharides Snack/Iron Salt Exhibiting Magnetic Properties, for Hexavalent Chromium Removal

Nowadays, the scientific interest is focused more and more on the development of new strategies in recycling of waste products as well as on the development of clean technologies due to the increased environmental pollution. In this work we studied the valorization of an expired cheese-tomato flavor corn snack, which is polysaccharide food product, by producing advanced hybrid magnetic materials for environmental remediation purposes. The carbonization-chemical activation of this snack using potassium hydroxide leads to a microporous activated carbon with high surface area (SgBET ~800 m2/g). The magnetic hybrid material was synthesized via an in-situ technique using iron acetate complex as the precursor to produce iron based magnetic nanoparticles. The resulting material retains a fraction of the microporous structure with surface area SgBET ~500 m2/g. Such material consists, of homogenously dispersed magnetic isolated zero valent iron nanoparticles and of iron carbides (Fe3C), into the carbon matrix. The magnetic carbon exhibited high adsorption capacity in Cr(VI) removal applications following a pseudosecond order kinetic model. The maximum adsorption capacity was 88.382 mgCr(VI)/gAC at pH = 3. Finally, oxidation experiments, in combination with FT-IR, Mössbauer, and VSM measurements indicated that the possible Cr6+ removal mechanism involves oxidation of iron phases and reduction of Cr6+ to Cr3+

Intercalation Study of Low-Molecular-Weight Hyperbranched Polyethyleneimine into Graphite Oxide

We report for the first time the intercalation of low-molecular-weight hyperbranched polyethyleneimine (PEI) into graphite oxide (GO) for the facile, bulk synthesis of novel graphene-based hybrid (GO-PEI) materials exhibiting tailored interlayer galleries. The size of the intercalant as well as the loading in GO were systematically investigated to determine their contribution to the basal spacing of the resulting materials. Powder X-ray diffraction measurements demonstrated the generation of constrained hybrid systems along the c axis that exhibit considerably increased interlayer distances compared with the starting, pristine GO. The results of X-ray photoelectron and FTIR studies are consistent with a "grafting-to" process of the intercalated PEI with the oxygen functional groups present along the GO framework. Furthermore, it was found that a great number of the nitrogen-containing groups in PEI still remain available within the newly formed, confined micro-environment of intercalated GO galleries. The increased surface area of the GO-PEI hybrids in conjunction with the remaining available active groups of intercalated PEI render the synthesised hybrids very attractive candidates as nanostructured adsorbents