160 research outputs found
Oral chemical burns caused by topical application of policresulen: a case report
Oral mucosal burns can occur after contact with various chemical agents, and commonly manifest as areas of mucosal sloughing and ulceration. Policresulen (Albothyl, Celltrion Pharm Inc.) is an over-the-counter topical antiseptic that is frequently used to treat stomatitis. Policresulen solution is highly acidic, with an approximate pH of 0.6; it can thus cause mucosal injury when improperly applied in the oral cavity. Here, we present a rare case of an oral mucosal burn resulting from incorrect self-administration of policresulen and emphasize the importance of increasing understanding of this adverse drug event among consumers and health professionals
Carbon dioxide fluxes of tundra vegetation communities on an esker top in the low-Arctic
Previous studies have shown that carbon dioxide fluxes vary considerably among Arctic environments and it is important to assess these differences in order to develop our understanding of the role of Arctic tundra in the global carbon cycle. Although many previous studies have examined tundra carbon dioxide fluxes, few have concentrated on elevated terrain (hills and ridge tops) that is exposed to harsh environmental conditions resulting in sparse vegetation cover and seemingly low productivity. In this study we measured carbon dioxide (CO2) exchange of four common tundra communities on the crest of an esker located in the central Canadian low-Arctic. The objectives were to quantify and compare CO2 fluxes from these communities, investigate responses to environmental variables and qualitatively compare fluxes with those from similar communities growing in less harsh lowland tundra environments. Measurements made during July and August 2010 show there was little difference in net ecosystem exchange (NEE) and gross ecosystem production (GEP) among the three deciduous shrub communities, Arctous alpina, Betula glandulosa and Vaccinium uliginosum, with means ranging from −4.09 to −6.57 μmol·m−2·s−1 and −7.92 to −9.24 μmol·m−2·s−1, respectively. Empetrum nigrum communities had significantly smaller mean NEE and GEP (−1.74 and −4.08 μmol·m−2·s−1, respectively). Ecosystem respiration (ER) was similar for all communities (2.56 to 3.03 μmol·m−2·s−1), except the B. glandulosa community which had a larger mean flux (4.66 μmol·m−2·s−1). Overall, fluxes for these esker-top communities were near the upper range of fluxes reported for other tundra communities. ER was related to soil temperature in all of the communities. Only B. glandulosa GEP and ER showed sensitivity to a persistent decline in soil moisture throughout the study. These findings may have important implications for how esker tops would be treated in construction of regional carbon budgets and for predicting the impacts of climate change on Arctic tundra future carbon budgets
Three-dimensional printing of temporary crowns with polylactic acid polymer using the fused deposition modeling technique: a case series
With recent developments in digital dentistry, research on techniques and materials for three-dimensional (3D) printing is actively underway. We report the clinical applications and outcomes of 3D printing of temporary crowns fabricated with polylactic acid (PLA) using a fused deposition modeling (FDM) printer. Five participants were recruited from among patients scheduled to be treated with a single full-coverage crown at a dental clinic in a university medical center from June to August 2022. We used 3D-printed crowns fabricated with PLA using an FDM printer as temporary crowns and were assessed for discomfort, fracture, and dislodging. The 3D-printed temporary crowns were maintained without fracture, dislodging, or discomfort until the permanent prosthesis was ready. The average time required for printing the temporary crowns was approximately 7 minutes. The 3D printing of temporary crowns with PLA using an FDM printer is a convenient process for dentists. However, these crowns have some limitations, such as rough surface texture and translucency; therefore, the 3D printing process should be improved to produce better prostheses
A Modified Relay Selection Scheme in Opportunistic Relay Communications
Abstract-In this paper, we develop a modified relay selection technique in opportunistic relay communications. In this approaches, we use a threshold level between source and intermediate (M ) relay nodes. Then our proposed scheme can decreases the contending relay's collision probability. We compare the performance depending on different threshold level by using Monte Carlo computer simulation. Through this process, we verify the collision probability performance's analysis
Subclinical vascular inflammation in subjects with normal weight obesity and its association with body Fat: an 18 F-FDG-PET/CT study
BACKGROUND: Although body mass index (BMI) is the most widely accepted parameter for defining obesity, recent studies have indicated a unique set of patients who exhibit normal BMI and excess body fat (BF), which is termed as normal weight obesity (NWO). Increased BF is an established risk factor for atherosclerosis. However, it is unclear whether NWO subjects already have a higher degree of vascular inflammation compared to normal weight lean (NWL) subjects; moreover, the association of BF with vascular inflammation in normal weight subjects is largely unknown. METHODS: NWO and NWL subjects (n = 82 in each group) without any history of significant vascular disease were identified from a 3-year database of consecutively recruited patients undergoing (18) F-fluorodeoxyglucose positron emission tomography/computed tomography ((18) F-FDG-PET/CT) at a self-referred Healthcare Promotion Program. The degree of subclinical vascular inflammation was evaluated using the mean and maximum target-to-background ratios (TBRmean and TBRmax) of the carotid artery, which were measured by (18) F-FDG-PET/CT (a noninvasive tool for assessing vascular inflammation). RESULTS: We found that metabolically dysregulation was greater in NWO subjects than in NWL subjects, with a significantly higher blood pressure, higher fasting glucose level, and worse lipid profile. Moreover, NWO subjects exhibited higher TBR than NWL subjects (TBRmean: 1.33 ± 0.16 versus 1.45 ± 0.19, p < 0.001; TBRmax: 1.52 ± 0.23 versus 1.67 ± 0.25, p < 0.001). TBR was significantly associated with total BF (TBRmean: r = 0.267, p = 0.001; TBRmax: r = 0.289, p < 0.001), age (TBRmean: r = 0.170, p = 0.029; TBRmax: r = 0.165, p = 0.035), BMI (TBRmean: r = 0.184, p = 0.018; TBRmax: r = 0.206, p = 0.008), and fasting glucose level (TBRmean: r = 0.157, p = 0.044; TBRmax: r = 0.182, p = 0.020). In multiple linear regression analysis, BF was an independent determinant of TBRmean and TBRmax, after adjusting for age, BMI, and fasting glucose level (TBRmean: regression coefficient = 0.020, p = 0.008; TBRmax: regression coefficient = 0.028, p = 0.005). Compared to NWL, NWO was also independently associated with elevated TBRmax values, after adjusting for confounding factors (odds ratio = 2.887, 95% confidence interval 1.206–6.914, p = 0.017). CONCLUSIONS: NWO is associated with a higher degree of subclinical vascular inflammation, of which BF is a major contributing factor. These results warrant investigations for subclinical atherosclerosis in NWO patients
Development and validation of a prediction model for knee joint line orientation after high tibial osteotomy
Background
Maintenance of optimal knee joint line orientation (KJLO) is important after high tibial osteotomy (HTO). No tools, however, are currently available that could predict the value of postoperative KJLO before surgery. First, this study sought to determine the effects of various preoperative anatomical alignment parameters to postoperative KJLO. Based upon these analyses, we aimed to devise an equation that predicts the value of postoperative KJLO.
Methods
A total of 14 radiographic parameters were measured in preoperative and postoperative full-limb standing anteroposterior radiographs on 50 patients who underwent open-wedge HTO. The parameters were analysed using multivariable linear regression to predict KJLO after HTO. External validation of the equation was done with 20 patients who underwent HTO at another institution.
Results
After HTO, KJLO increased from − 0.8° to 2.9° (P < 0.001). Based on the multivariable linear regression analysis, an equation was derived that can estimate postoperative KJLO after HTO; postoperative KJLO(°) = 1.029 + 0.560 × preoperative KJLO(°) + 0.310 × preoperative tibia plateau inclination(°) + 0.463 × aimed correction angle(°). The adjusted coefficients of determination value for this equation was 0.721. The equation also showed good calibration and predictability in external validation with predicted squared correlation coefficient of 0.867.
Conclusions
This study analysed the effects of preoperative anatomical alignment parameters on the postoperative KJLO. An equation which predicts postoperative KJLO with preoperative anatomical alignment factors was devised and validated. This equation would help in selecting optimal patients for HTO and in selecting the optimal target correction angle in HTO
Recommended from our members
A Mechanistic Analysis of Phase Evolution and Hydrogen Storage Behavior in Nanocrystalline Mg(BH4)2 within Reduced Graphene Oxide.
Magnesium borohydride (Mg(BH4)2, abbreviated here MBH) has received tremendous attention as a promising onboard hydrogen storage medium due to its excellent gravimetric and volumetric hydrogen storage capacities. While the polymorphs of MBH-alpha (α), beta (β), and gamma (γ)-have distinct properties, their synthetic homogeneity can be difficult to control, mainly due to their structural complexity and similar thermodynamic properties. Here, we describe an effective approach for obtaining pure polymorphic phases of MBH nanomaterials within a reduced graphene oxide support (abbreviated MBHg) under mild conditions (60-190 °C under mild vacuum, 2 Torr), starting from two distinct samples initially dried under Ar and vacuum. Specifically, we selectively synthesize the thermodynamically stable α phase and metastable β phase from the γ-phase within the temperature range of 150-180 °C. The relevant underlying phase evolution mechanism is elucidated by theoretical thermodynamics and kinetic nucleation modeling. The resulting MBHg composites exhibit structural stability, resistance to oxidation, and partially reversible formation of diverse [BH4]- species during de- and rehydrogenation processes, rendering them intriguing candidates for further optimization toward hydrogen storage applications
- …