5,476 research outputs found
Experimental Study of the Effect of External Signal on Microwave Oscillations in a Nonrelativistic Electron Beam with Virtual Cathode
The effect of an external harmonic signal on the characteristics of microwave
generation in a nonrelativistic electron beam with virtual cathode (VC) formed
in a static retarding electric field (low-voltage vircator system) has been
experimentally studied. A significant increase in the vircator generation power
is observed when the frequency of the external signal is close to the frequency
of VC oscillations. At large detunings, a broadband chaotic generation is
observed.Comment: 3 pages, 2 figure
The Band Excitation Method in Scanning Probe Microscopy for Rapid Mapping of Energy Dissipation on the Nanoscale
Mapping energy transformation pathways and dissipation on the nanoscale and
understanding the role of local structure on dissipative behavior is a
challenge for imaging in areas ranging from electronics and information
technologies to efficient energy production. Here we develop a novel Scanning
Probe Microscopy (SPM) technique in which the cantilever is excited and the
response is recorded over a band of frequencies simultaneously rather than at a
single frequency as in conventional SPMs. This band excitation (BE) SPM allows
very rapid acquisition of the full frequency response at each point (i.e.
transfer function) in an image and in particular enables the direct measurement
of energy dissipation through the determination of the Q-factor of the
cantilever-sample system. The BE method is demonstrated for force-distance and
voltage spectroscopies and for magnetic dissipation imaging with sensitivity
close to the thermomechanical limit. The applicability of BE for various SPMs
is analyzed, and the method is expected to be universally applicable to all
ambient and liquid SPMs.Comment: 32 pages, 9 figures, accepted for publication in Nanotechnolog
Dynamic Behavior in Piezoresponse Force Microscopy
Frequency dependent dynamic behavior in Piezoresponse Force Microscopy (PFM)
implemented on a beam-deflection atomic force microscope (AFM) is analyzed
using a combination of modeling and experimental measurements. The PFM signal
comprises contributions from local electrostatic forces acting on the tip,
distributed forces acting on the cantilever, and three components of the
electromechanical response vector. These interactions result in the bending and
torsion of the cantilever, detected as vertical and lateral PFM signals. The
relative magnitudes of these contributions depend on geometric parameters of
the system, the stiffness and frictional forces of tip-surface junction, and
operation frequencies. The dynamic signal formation mechanism in PFM is
analyzed and conditions for optimal PFM imaging are formulated. The
experimental approach for probing cantilever dynamics using frequency-bias
spectroscopy and deconvolution of electromechanical and electrostatic contrast
is implemented.Comment: 65 pages, 15 figures, high quality version available upon reques
Direct Measurement of Periodic Electric Forces in Liquids
The electric forces acting on an atomic force microscope tip in solution have
been measured using a microelectrochemical cell formed by two periodically
biased electrodes. The forces were measured as a function of lift height and
bias amplitude and frequency, providing insight into electrostatic interactions
in liquids. Real-space mapping of the vertical and lateral components of
electrostatic forces acting on the tip from the deflection and torsion of the
cantilever is demonstrated. This method enables direct probing of electrostatic
and convective forces involved in electrophoretic and dielectroforetic
self-assembly and electrical tweezer operation in liquid environments
Experimental and Theoretical Investigation into the Effect of the Electron Velocity Distribution on Chaotic Oscillations in an Electron Beam under Virtual Cathode Formation Conditions
The effect of the electron transverse and longitudinal velocity spread at the
entrance to the interaction space on wide-band chaotic oscillations in intense
multiple-velocity beams is studied theoretically and numerically under the
conditions of formation of a virtual cathode. It is found that an increase in
the electron velocity spread causes chaotization of virtual cathode
oscillations. An insight into physical processes taking place in a virtual
cathode multiple velocity beam is gained by numerical simulation. The
chaotization of the oscillations is shown to be associated with additional
electron structures, which were separated out by constructing charged particle
distribution functions.Comment: 9 pages, 8 figure
The 2mrad horizontal crossing angle IR layout for a TeV ILC
The current status of the 2mrad crossing angle layout for the ILC is
reviewed. The scheme developed in the UK and France is described and the
performance discussed for a TeV machine. Secondly, the scheme developed at SLAC
and BNL is then studied and modified for a TeV machine. We find that both
schemes can handle the higher energy beam with modifications, and share many
common features.Comment: The proceedings of the 2005 International Linear Collider Workshop,
March 2005. 4 pages, 5 figure
- âŠ