Viability assays of PLLA fibrous membranes produced by rotary jet spinning for application in tissue engineering

Tissue engineering suggests different forms to reconstruct tissues and organs. One of the ways is through the use of polymeric biomaterials such as poly(L-lactic acid) (PLLA). PLLA is a recognized material in tissue engineering due to its characteristics as biocompatibility and bioresorbability. In this work PLLA fibrous membranes were produced by a simple technique known as rotary jet spinning. The rotary jet spinning consists of fibrous membranes production, with fibers of scale nano/micrometric, from a polymeric solution through the centrifugal force generated by the equipment. The membranes formed were subjected to preliminary in vitro assays to verify the cytotoxicity of the membranes made in contact with the cells. Direct cytotoxicity assays were performed through the MTT, AlamarBlue® and Live/Dead® tests, with fibroblastic and osteoblastic cells. The results obtained in this study showed that PLLA membranes produced by rotary jet spinning showed promising results in the 24-hours contact period of the cells with the PLLA fibrous membranes. The information presented in this preliminary study provides criteria to be taken in the future procedures that will be performed with the biomaterial produced, aiming at its improvement62COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPsem informação2008/57680-

Regenerative collagen biomembrane: Interim results of a Phase I veterinary clinical trial for skin repair [version 1; referees: 2 approved, 1 approved with reservations]

Background: The availability of commercial tissue engineering skin repair products for veterinary use is scarce or non-existent. To assess features of novel veterinary tissue engineered medical devices, it is therefore reasonable to compare with currently available human devices. During the development and regulatory approval phases, human medical devices that may have been identified as comparable to a novel veterinary device, may serve as predicate devices and accelerate approval in the veterinary domain. The purpose of the study was to evaluate safety and efficacy of the biomembrane for use in skin repair indications. Methods: In the study as a whole (3 year total length), 15 patients (animals), dogs and cats (male/female, 2 cm), with a wound depth equivalent to 2nd/3rd degree burns are to be studied from Day 0 to Day 120-240, post-application of the biomembrane. This interim report covers the 5 patients assessed to date and deemed eligible, of which 3 enrolled, and 2 have completed the treatment. Wound beds were prepared and acellular collagen biomembranes (Eva Scientific Ltd, São Paulo, Brazil) applied directly onto the wounds, and sutured at the margins to the patient's adjacent tissue. Wound size over time, healing rate, general skin quality and suppleness were assessed as outcomes. Qualitative (appearance and palpation) and quantitative (based on Image Analysis of photographs) wound assessment techniques were used. Results: Both patients’ wounds healed fully, with no adverse effects, and the healing rate was comparable in both, maxing out at approximately 1 cm2/day. Conclusions: Early results on the biomembrane's safety and efficacy indicate suitability for skin repair usage in veterinary patients

A new approach to heart valve tissue engineering:mimicking the heart ventricle with a ventricular assist device in a novel bioreactor.

The `biomimetic` approach to tissue engineering usually involves the use of a bioreactor mimicking physiological parameters whilst supplying nutrients to the developing tissue. Here we present a new heart valve bioreactor, having as its centrepiece a ventricular assist device (VAD), which exposes the cell-scaffold constructs to a wider array of mechanical forces. The pump of the VAD has two chambers: a blood and a pneumatic chamber, separated by an elastic membrane. Pulsatile air-pressure is generated by a piston-type actuator and delivered to the pneumatic chamber, ejecting the fluid in the blood chamber. Subsequently, applied vacuum to the pneumatic chamber causes the blood chamber to fill. A mechanical heart valve was placed in the VAD`s inflow position. The tissue engineered (TE) valve was placed in the outflow position. The VAD was coupled in series with a Windkessel compliance chamber, variable throttle and reservoir, connected by silicone tubings. The reservoir sat on an elevated platform, allowing adjustment of ventricular preload between 0 and 11 mmHg. To allow for sterile gaseous exchange between the circuit interior and exterior, a 0.2 mu m filter was placed at the reservoir. Pressure and flow were registered downstream of the TE valve. The circuit was filled with culture medium and fitted in a standard 5% CO(2) incubator set at 37 degrees C. Pressure and flow waveforms were similar to those obtained under physiological conditions for the pulmonary circulation. The `cardiomimetic` approach presented here represents a new perspective to conventional biomimetic approaches in TE, with potential advantages. Copyright (C) 2010 John Wiley & Sons, Ltd.Norwegian State Educational Loan FundSkipsreder Tom Wilhelmsens StiftelseKrista and Viggo Petersens FondKnut Hamsuns MinnefondHotelejer Anders Mansson og hustru Hanne Manssons LegatOticon FondenReinholdt W. Jorck og Hustrus FondNorwegian Society of Graduate Technical and Scientific Professional