Durability of Mortar Incorporating Ferronickel Slag Aggregate and Supplementary Cementitious Materials Subjected to Wet–Dry Cycles

This paper presents the strength and durability of cement mortars using 0–100% ferronickel slag (FNS) as replacement of natural sand and 30% fly ash or ground granulated blast furnace slag (GGBFS) as cement replacement. The maximum mortar compressive strength was achieved with 50% sand replacement by FNS. Durability was evaluated by the changes in compressive strength and mass of mortar specimens after 28 cycles of alternate wetting at 23 °C and drying at 110 °C. Strength loss increased by the increase of FNS content with marginal increases in the mass loss. Though a maximum strength loss of up to 26% was observed, the values were only 3–9% for 25–100% FNS contents in the mixtures containing 30% fly ash. The XRD data showed that the pozzolanic reaction of fly ash helped to reduce the strength loss caused by wet–dry cycles. Overall, the volume of permeable voids (VPV) and performance in wet–dry cycles for 50% FNS and 30% fly ash were better than those for 100% OPC and natural sand

Association of HLA-A, B, DRB1 alleles and haplotypes with HIV-1 infection in Chongqing, China

<p>Abstract</p> <p>Background</p> <p>The human immunodeficiency virus type 1(HIV-1) epidemic in Chongqing, China, is increasing rapidly with the dominant subtype of CRF07_BC over the past 3 years. Since human leukocyte antigen (HLA) polymorphisms have shown strong association with susceptibility/resistance to HIV-1 infection from individuals with different ethnic backgrounds, a recent investigation on frequencies of HLA class I and class II alleles in a Chinese cohort also indicated that similar correlation existed in HIV infected individuals from several provinces in China, however, such information is unavailable in Chongqing, southwest China.</p> <p>Methods</p> <p>In this population-based study, we performed polymerase chain reaction analysis with sequence-specific oligonucleotide probes (PCR-SSOP) for intermediate-low-resolution HLA typing in a cohort of 549 HIV-1 infected individuals, another 2475 healthy subjects from the Han nationality in Chongqing, China, were selected as population control. We compared frequencies of HLA-A, B, DRB1 alleles, haplotypes and genotypes between the two groups, and analyzed their association with HIV-1 susceptibility or resistance.</p> <p>Results</p> <p>The genetic profile of HLA (A, B, DRB1) alleles of HIV-1 infected individuals from Chongqing Han of China was obtained. Several alleles of HLA-B such as B*46 (P = 0.001, OR = 1.38, 95%CI = 1.13-1.68), B*1501G(B62) (P = 0.013, OR = 1.42, 95%CI = 1.08-1.88), B*67 (P = 0.022, OR = 2.76, 95%CI = 1.16-6.57), B*37 (P = 0.014, OR = 1.93, 95%CI = 1.14-3.28) and B*52 (P = 0.038, OR = 1.64, 95%CI = 1.03-2.61) were observed to have association with susceptibility to HIV-1 infection in this population. In addition, the haplotype analysis revealed that A*11-B*46, A*24-B*54 and A*01-B*37 for 2-locus, and A*11-B*46-DRB1*09, A*02-B*46-DRB1*08, A*11-B*4001G-DRB1*15, A*02-B*4001G-DRB1*04, A*11-B*46-DRB1*08 and A*02-B*4001G-DRB1*12 for 3-locus had significantly overrepresented in HIV-1 infected individuals, whereas A*11-B*1502G, A*11-B*1502G-DRB1*12 and A*33-B*58-DRB1*13 were underrepresented. However, the low-resolution homozygosity of HLA-A, B, DRB1 loci and HLA-Bw4/Bw6 genotypes did not differ significantly between the two groups.</p> <p>Conclusion</p> <p>These results may contribute to the database of HLA profiles in HIV-1 infected Chinese population, consequently, the association of certain HLA alleles with susceptibility or resistance to HIV-1 infection would provide with clues in choosing proper preventive strategies against HIV-1 infection and developing effective HIV-1 vaccines in Chinese population, especially for those in southwest China.</p

Structural and Thermal Retrofitting of Masonry Walls: The Case of a School in Vittoria (RG)

Sustainability awareness of buildings life-cycle represents one of the most important engineering challenge. This is more important in developed country like Italy in which buildings age and importance can be huge. Consequently, the whole life-cycle of constructions should be analyzed and assessed during the design of retrofitting interventions. This works reports on the application of an integrated approach to evaluate structural and thermal retrofitting strategies for masonry walls. Ecological (equivalent CO2) and economic costs of each examined retrofitting solution are evaluated and compared. In this way the structural and thermal capacity of the masonry walls is represented by an iso-cost mapping. The environmental demand considering both thermal and seismic load of the construction site is represented by an equivalent function that is used to find the optimal retrofitting solution for each considered cost. In this case study the masonry walls of a school located in Vittoria (RG - Italy) are considered. Six retrofitting techniques are described and the comparison between ecological and economical cost allowed to highlight the characteristics of the different interventions and the best retrofitting strategy