Coralline Sr/Ca and Mg/Ca thermometer for the northern South China Sea: calibration and primary application high resolution on high-resolution SST reconstructing

利用全谱直读等离子体光谱(ICP2AES) 的分析方法精确分析了南海珊瑚的SrPCa 和MgPCa 比值,结合实测表层海水温度(SST),标定了海南岛南部三亚海域和西沙海域两个滨珊瑚的SrPCa 和MgPCa 温度计。在此基础上,尝试对两个南海北部全新世时期的珊瑚进行SST记录重建。结果显示约540aB.P. (小冰期) 西沙海域夏季月均SST 较现代低约1℃,而约6 500aB.P. (大暖期) 海南岛三亚海域夏季月均SST则高出现代1.0～1.5℃。The method for precisely and simultaneously measuring the coralline Sr/Ca and Mg/Ca ratios was established using inductively coupled plasma atomic emission spectrometry (ICP-AES). Using this method, the high-resolution Sr/Ca and Mg/Ca ratios of two Porites lutea from Sanya, South Hainan Island and Xisha Islands were measured. By comparing to the instrumentally measured sea surface temperatures in these two areas, the coralline Sr/Ca thermometer and the Mg/Ca thermometer were calibrated. These two thermometers can provide SST records with an error bar < 0.2℃, and they are suitable for high-resolution SST reconstructions in these areas. Based on these two thermometers, two short SST records were reconstructed from two Holocene Porites corals of the northern South China Sea. The results indicated that the monthly summer SSTs in Xisha Islands at about 540 years ago (the Little Ice Age) were 1℃ lower than that at present, and the monthly summer SSTs in Sanya, southern Hainan Island at 6 500 years ago (the Megathermal) were about 1℃ to 1 5℃ higher than that at present.published_or_final_versio

Semimetallic behavior in Heusler-type Ru2TaAl and thermoelectric performance improved by off-stoichiometry

We report a study of the temperature-dependent electrical resistivity, Seebeck coefficient, thermal conductivity, specific heat, and Al27 nuclear magnetic resonance (NMR) in Heusler-type Ru2TaAl, to shed light on its semimetallic behavior. While the temperature dependence of the electrical resistivity exhibits semiconductorlike behavior, the analysis of low-temperature specific heat reveals a residual Fermi-level density of states (DOS). Both observations can be realized by means of a semimetallic scenario with the Fermi energy located in the pseudogap of the electronic DOS. The NMR Knight shift and spin-lattice relaxation rate show activated behavior at higher temperatures, attributing to the thermally excited carriers across a pseudogap in Ru2TaAl. From the first-principles band structure calculations, we further provide a clear picture that an indirect overlap between electron and hole pockets is responsible for the formation of a pseudogap in the vicinity of the Fermi level of Ru2TaAl. In addition, an effort for improving the thermoelectric performance of Ru2TaAl has been made by investigating the thermoelectric properties of Ru1.95Ta1.05Al. We found significant enhancements in the electrical conductivity and Seebeck coefficient and marked reduction in the thermal conductivity via the off-stoichiomet ric approach. This leads to an increase in the figure-of-merit ZT value from 6.1×10-4 in Ru2TaAl to 3.4×10-3 in Ru1.95Ta1.05Al at room temperature. In this respect, a further improvement of thermoelectric performance based on Ru2TaAl through other off-stoichiometric attempts is highly probable

Changes in targeted metabolomics in lung tissue of chronic obstructive pulmonary disease.

BACKGROUND: Chronic obstructive pulmonary disease (COPD) is a common chronic lung disease and its incidence is steadily increasing. COPD patients and mouse models of COPD share some similarities in lung pathology and physiology. We performed this study to explore the potential metabolic pathways involved in the pathogenesis of COPD and to discover the COPD-associated biomarkers. Furthermore, we aimed to examine how much the mouse model of COPD was similar and different to human COPD in terms of the altered metabolites and pathways. METHODS: Twenty human lung tissue samples (ten COPD and ten controls) and twelve mice lung tissue samples (six COPD and six controls) were analyzed by targeted HM350 metabolomics, and multivariate and pathway analysis were performed by Kyoto Encyclopedia of Genes and Genomes (KEGG) database. RESULTS: The counts of many metabolites such as amino acids, carbohydrates and carnitines were changed in both COPD patients and mice compared to controls, respectively. While lipid metabolism was changed only in COPD mice. After KEGG analysis, we found these altered metabolites involved in COPD through aging, apoptosis, oxidative stress and inflammation pathways. CONCLUSIONS: The expressions of metabolites changed in both COPD patients and cigarette smoke exposed (CS-exposed) mice. And there were also some differences between COPD patients and mouse models due to the differences between species. Our study suggested the dysregulation in amino acid metabolism, energy production pathway and perhaps lipid metabolism may be significantly related to the pathogenesis of COPD

Janus monolayers of transition metal dichalcogenides.

Structural symmetry-breaking plays a crucial role in determining the electronic band structures of two-dimensional materials. Tremendous efforts have been devoted to breaking the in-plane symmetry of graphene with electric fields on AB-stacked bilayers or stacked van der Waals heterostructures. In contrast, transition metal dichalcogenide monolayers are semiconductors with intrinsic in-plane asymmetry, leading to direct electronic bandgaps, distinctive optical properties and great potential in optoelectronics. Apart from their in-plane inversion asymmetry, an additional degree of freedom allowing spin manipulation can be induced by breaking the out-of-plane mirror symmetry with external electric fields or, as theoretically proposed, with an asymmetric out-of-plane structural configuration. Here, we report a synthetic strategy to grow Janus monolayers of transition metal dichalcogenides breaking the out-of-plane structural symmetry. In particular, based on a MoS2 monolayer, we fully replace the top-layer S with Se atoms. We confirm the Janus structure of MoSSe directly by means of scanning transmission electron microscopy and energy-dependent X-ray photoelectron spectroscopy, and prove the existence of vertical dipoles by second harmonic generation and piezoresponse force microscopy measurements

Dual-gated bilayer graphene hot electron bolometer

Detection of infrared light is central to diverse applications in security, medicine, astronomy, materials science, and biology. Often different materials and detection mechanisms are employed to optimize performance in different spectral ranges. Graphene is a unique material with strong, nearly frequency-independent light-matter interaction from far infrared to ultraviolet, with potential for broadband photonics applications. Moreover, graphene's small electron-phonon coupling suggests that hot-electron effects may be exploited at relatively high temperatures for fast and highly sensitive detectors in which light energy heats only the small-specific-heat electronic system. Here we demonstrate such a hot-electron bolometer using bilayer graphene that is dual-gated to create a tunable bandgap and electron-temperature-dependent conductivity. The measured large electron-phonon heat resistance is in good agreement with theoretical estimates in magnitude and temperature dependence, and enables our graphene bolometer operating at a temperature of 5 K to have a low noise equivalent power (33 fW/Hz1/2). We employ a pump-probe technique to directly measure the intrinsic speed of our device, >1 GHz at 10 K.Comment: 5 figure

Risk of selection bias in randomised trials

Background: Selection bias occurs when recruiters selectively enrol patients into the trial based on what the next treatment allocation is likely to be. This can occur even if appropriate allocation concealment is used if recruiters can guess the next treatment assignment with some degree of accuracy. This typically occurs in unblinded trials when restricted randomisation is implemented to force the number of patients in each arm or within each centre to be the same. Several methods to reduce the risk of selection bias have been suggested; however, it is unclear how often these techniques are used in practice. Methods: We performed a review of published trials which were not blinded to assess whether they utilised methods for reducing the risk of selection bias. We assessed the following techniques: (a) blinding of recruiters; (b) use of simple randomisation; (c) avoidance of stratification by site when restricted randomisation is used; (d) avoidance of permuted blocks if stratification by site is used; and (e) incorporation of prognostic covariates into the randomisation procedure when restricted randomisation is used. We included parallel group, individually randomised phase III trials published in four general medical journals (BMJ, Journal of the American Medical Association, The Lancet, and New England Journal of Medicine) in 2010. Results: We identified 152 eligible trials. Most trials (98%) provided no information on whether recruiters were blind to previous treatment allocations. Only 3% of trials used simple randomisation; 63% used some form of restricted randomisation, and 35% did not state the method of randomisation. Overall, 44% of trials were stratified by site of recruitment; 27% were not, and 29% did not report this information. Most trials that did stratify by site of recruitment used permuted blocks (58%), and only 15% reported using random block sizes. Many trials that used restricted randomisation also included prognostic covariates in the randomisation procedure (56%). Conclusions: The risk of selection bias could not be ascertained for most trials due to poor reporting. Many trials which did provide details on the randomisation procedure were at risk of selection bias due to a poorly chosen randomisation methods. Techniques to reduce the risk of selection bias should be more widely implemented

LP-INDEX: Explore the Best Practice of LPWAN Technologies in Smart City

Internet of Things (IoT) based infrastructures and applications are essential parts in smart city establishment. The low power wide area network (LPWAN) plays a key role in IoT techniques due to the characteristics of wide coverage and low power consumption. However, it is hard to decide which one of the LPWAN techniques to be implemented in a specific application for best practice. Considering this, we discussed the main characteristics of the three popular LPWAN technologies, LoRaWAN, NB-IoT, and Sigfox, and proposed an LP-INDEX to weighting them according to application requirements. To further distinguish their difference, a comparison test based on parking detection sensors using the three different techniques was implemented as a use case

New Physics in Bs -> J/psi phi: a General Analysis

Recently, the CDF and D0 collaborations measured indirect CP violation in Bs -> J/psi phi and found a hint of a signal. If taken at face value, this can be interpreted as a nonzero phase of Bs-Bsbar mixing (beta_s), in disagreement with the standard model, which predicts that beta_s ~= 0. In this paper, we argue that this analysis may be incomplete. In particular, there can be new physics (NP) in the bbar -> sbar c cbar decay. If so, the value of beta_s is different than for the case in which NP is assumed to be present only in the mixing. We have examined several models of NP and found that, indeed, there can be significant contributions to the decay. These effects are consistent with measurements in B -> J/psi K* and Bd -> J/psi Ks. Due to the NP in the decay, polarization-dependent indirect CP asymmetries and triple-product asymmetries are predicted in Bs -> J/psi phi.Comment: 28 pages, JHEP, no figures. Considerable changes made. Abstract and main text of paper modified to alter presentation. Appendix added. References added. Conclusions unchanged