Microstructure and biomechanical characteristics of bone substitutes for trauma and orthopaedic surgery

Abstract. BACKGROUND: Many (artificial) bone substitute materials are currently available for use in orthopaedic trauma surgery. Objective data on their biological and biomechanical characteristics, which determine their clinical application, is mostly lacking. The aim of this study was to investigate structural and in vitro mechanical properties of nine bone substitute cements registered for use in orthopaedic trauma surgery in the Netherlands. METHODS: Seven calcium phosphate cements (BoneSource®, Calcibon®, ChronOS®, Eurobone®, HydroSet™, Norian SRS®, and Ostim®), one calcium sulphate cement (MIIG® X3), and one bioactive glass cement (Cortoss®) were tested. Structural characteristics were measured by micro-CT scanning. Compression strength and stiffness were determined following unconfined compression tests. RESULTS: Each bone substitute had unique characteristics. Mean total porosity ranged from 53% (Ostim®) to 0.5% (Norian SRS®). Mean pore size exceeded 100 μm only in Eurobone® and Cortoss® (162.2 ± 107.1 μm and 148.4 ± 70.6 μm, respectively). However, 230 μm pores were found in Calcibon®, Norian SRS®, HydroSet™, and MIIG® X3. Connectivity density ranged from 27/cm3 for HydroSet™ to 0.03/cm3 for Calcibon®. The ultimate compression strength was highest in Cortoss® (47.32 MPa) and lowest in Ostim® (0.24 MPa). Young's Modulus was highest in Calcibon® (790 MPa) and lowest in Ostim® (6 MPa). CONCLUSIONS: The bone substitutes tested display a wide range in structural properties and compression strength, indicating that they will be suitable for different clinical indications. The data outlined here will help surgeons to select the most suitable products currently available for specific clinical indications

Rapid cloning of disease-resistance genes in plants using mutagenesis and sequence capture

Wild relatives of domesticated crop species harbor multiple, diverse, disease resistance (R) genes that could be used to engineer sustainable disease control. However, breeding R genes into crop lines often requires long breeding timelines of 5–15 years to break linkage between R genes and deleterious alleles (linkage drag). Further, when R genes are bred one at a time into crop lines, the protection that they confer is often overcome within a few seasons by pathogen evolution1. If several cloned R genes were available, it would be possible to pyramid R genes2 in a crop, which might provide more durable resistance1. We describe a three-step method (MutRenSeq)-that combines chemical mutagenesis with exome capture and sequencing for rapid R gene cloning. We applied MutRenSeq to clone stem rust resistance genes Sr22 and Sr45 from hexaploid bread wheat. MutRenSeq can be applied to other commercially relevant crops and their relatives, including, for example, pea, bean, barley, oat, rye, rice and maize

Behavioural and physiological responses of individually housed dairy calves to change in milk feeding frequency at different ages

peer reviewedThis study aimed to use a range of non-invasive monitoring technologies to investigate the behavioural and physiological responses of individually housed dairy calves to age at change in milk replacer (MR) feeding frequency. Forty-eight Holstein Friesian calves were individually penned and fed MR (625 g/d) as solids in one of three feeding regimes: (i) once-a-day feeding commencing at age 14 d (OAD14), (ii) once-a-day feeding commencing at age 28 d (OAD28) and (iii) twice-a-day feeding (TAD). Several behavioural (automatic activity sensors), physiological (infrared [IR] thermography and heart rate variability [HRV]) and haematological indicators were used to examine calf responses. Reduction in milk feeding frequency at 14 or 28 d of age increased daily concentrate intakes and drinking water consumption throughout the pre-wean period. Calf lying behaviour was unaffected by reduction in milk feeding frequency; however, TAD calves recorded a significant decrease in total daily lying time during the post-wean period compared with OAD28s. There was no effect of treatment on IR eye or rectal temperature throughout the experiment; however, there was an effect of age, with IR temperature decreasing as calf age increased. OAD14 calves tended to have decreased HRV at days 14 and 16, which is suggestive of an increased stress load. The findings suggest that under high levels of animal husbandry and whilst maintaining the same amount of milk powder/d (625 g/d), reduction in milk feeding frequency from twice to once daily at 28 d can occur without significant impact to behavioural, performance and physiological parameters assessed here

Identification and mapping of two powdery mildew resistance genes in Triticum boeoticum L

Powdery mildew (PM) caused by Blumeria graminis f. sp. tritici (Bgt), is one of the important foliar diseases of wheat that can cause serious yield losses. Breeding for cultivars with diverse resources of resistance is the most promising approach for combating this disease. The diploid A genome progenitor species of wheat are an important resource for new variability for disease resistance genes. An accession of Triticum boeoticum (A(b)A(b)) showed resistance against a number of Bgt isolates, when tested using detached leaf segments. Inheritance studies in a recombinant inbred line population (RIL), developed from crosses of PM resistant T. boeoticum acc. pau5088 with a PM susceptible T. monococcum acc. pau14087, indicated the presence of two powdery mildew resistance genes in T. boeoticum acc. pau5088. Analysis of powdery mildew infection and molecular marker data of the RIL population revealed that both powdery mildew resistance genes are located on the long arm of chromosome 7A. Mapping was conducted using an integrated linkage map of 7A consisting of SSR, RFLP, STS, and DArT markers. These powdery mildew resistance genes are tentatively designated as PmTb7A.1 and PmTb7A.2. The PmTb7A.2 is closely linked to STS markers MAG2185 and MAG1759 derived from RFLP probes which are linked to powdery mildew resistance gene Pm1. This indicated that PmTb7A.2 might be allelic to Pm1. The PmTb7A.1, flanked by a DArT marker wPt4553 and an SSR marker Xcfa2019 in a 4.3 cM interval, maps proximal to PmT7A.2. PmTb7A.1 is putatively a new powdery mildew resistance gene. The powdery mildew resistance genes from T. boeoticum are currently being transferred to cultivated wheat background through marker-assisted backcrossing, using T. durum as bridging species

Determinants and regulating processes in bronchial hyperreactivity

textabstractBronchial hyperresponsiveness (BHR) can be considered as a feature of asthma, although only a loose relationship is present with symptoms and severity of the disease. Epidemiology of BHR may inform about determining factors in BHR and its role as a risk factor. BHR is found already at a young age, mostly diminishes with age, and increases in many asthmatic patients after midlife. Genetic determinants are suggested by familial segregation and twin studies. Allergy, respiratory infections, and cigarette smoking are found to induce increase in BHR and to modify its degree at the long run. The mechanisms in BHR are being unraveled gradually. A chronic inflammation with an important role for eosinophils, mast cells, and others, is thought to modify bronchial mechanisms, such as smooth muscle, epithelium, and autonomic systems. Growing evidence supports that T lymphocytes are implicated and may determine many of the inflammatory cells, such as eosinophils, neutrophils, and mast cells