4,023 research outputs found
Inclusive angular distribution of alpha and Li fragments produced in the Fe-C and Fe-Pb collisions at 1.88 GeV/u
The LS (laboratory system) emission angles theta for 2188 and 298 Li fragments, produced inclusively in relativistic Fe-C and Fe-Pb collisions, have been measured in reference to incident Fe-ion beam tracks nearby in nuclear emulsion. An empirical differential frequency formula, dN(cot theta) = exp (a + b cot theta)d(cot theta) is obtained with the constant b approx. = -0.026 at 1.88 GeV/u, which seems to be independent on the kinds of target nucleus as well as on the kinds of projectile fragments
Predictability of reset switching voltages in unipolar resistance switching
In unipolar resistance switching of NiO capacitors, Joule heating in the
conducting channels should cause a strong nonlinearity in the low resistance
state current-voltage (I-V) curves. Due to the percolating nature of the
conducting channels, the reset current IR, can be scaled to the nonlinear
coefficient Bo of the I-V curves. This scaling relationship can be used to
predict reset voltages, independent of NiO capacitor size; it can also be
applied to TiO2 and FeOy capacitors. Using this relation, we developed an error
correction scheme to provide a clear window for separating reset and set
voltages in memory operations
Magnetic and humidity sensing properties of nanostructured Cu[x]Co[1-x]Fe2O4 synthesized by auto combustion technique
Magnetic nanomaterials (23-43 nm) of CuCoFeO\ (x = 0.0,
0.5 and 1.0) were synthesized by auto combustion method. The crystallite sizes
of these materials were calculated from X-ray diffraction peaks. The band
observed in Fourier transform infrared spectrum near 575 cm in these
samples confirm the presence of ferrite phase. Conductivity measurement shows
the thermal hysteresis and demonstrates the knee points at 475C, 525C
and 500C for copper ferrite, cobalt ferrite and copper-cobalt mixed ferrite
respectively. The hystersis M-H loops for these materials were traced using the
Vibrating Sample Magnetometer (VSM) and indicate a significant increase in the
saturation magnetization (M) and remanence (M) due to the substitution
of Cu ions in cobalt ferrite, while the intrinsic coercivity (H) was
decreasing. Among these ferrites, copper ferrite exhibits highest sensitivity
for humidity.Comment: 12 pages, 7 figure
On Propagation Characteristics of Reconfigurable Surface Wave Platform: Simulation and Experimental Verification
Reconfigurable intelligent surface (RIS) as a smart reflector is
revolutionizing research for next-generation wireless communications.
Complementing this is a concept of using RIS as an efficient propagation medium
for potentially superior path loss characteristics. Motivated by a recent
porous surface architecture that facilitates reconfigurable pathways with
cavities filled with fluid metal, this paper studies the propagation
characteristics of different pathway configurations in different lossy
materials on the reconfigurable surface wave platform by using a commercial
full electromagnetic simulation software and S-parameters experiments. This
paper also looks into the best scheme to switch between a straight pathway and
a -bend and attempts to quantify the additional path loss when making
a turn. Our experimental results verify the simulation results, showing the
effectiveness of the proposed reconfigurable surface wave platform for a
wide-band, low path loss and highly programmable communications.Comment: Submitted to IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 202
- …