110 research outputs found
Plasma wave undulator for laser-accelerated electrons
Laser-plasma accelerators have become compact sources of ultrashort electron
bunches at energies up to the gigaelectronvolt range thanks to the remarkable
progress made over the past decade. A direct application of these electron
bunches is the production of short pulse x-ray radiation sources. In this
letter, we study a fully optically driven x-ray source based on the combination
of a laser-plasma accelerator and a plasma wave undulator. The longitudinal
electric field of a laser-generated plasma wave is used to wiggle electrons
transversally. The period of this plasma undulator being equal to the plasma
wavelength, tunable photon energies in the 10 keV range can be achieved with
electron energies in the 100-200 MeV range. Considering a 10s TW class
femtosecond laser system, undulators with a strength parameter K~0.5 and with
about ten periods can be combined with a laser-plasma accelerator, resulting in
several 10^-2 emitted x-ray photons per electron.Comment: 6 pages, 4 figure
Energy boost in laser wakefield accelerators using sharp density transitions
The energy gain in laser wakefield accelerators is limited by dephasing
between the driving laser pulse and the highly relativistic electrons in its
wake. Since this phase depends on both the driver and the cavity length, the
effects of dephasing can be mitigated with appropriate tailoring of the plasma
density along propagation. Preceding studies have discussed the prospects of
continuous phase-locking in the linear wakefield regime. However, most
experiments are performed in the highly non-linear regime and rely on
self-guiding of the laser pulse. Due to the complexity of the driver evolution
in this regime it is much more difficult to achieve phase locking. As an
alternative we study the scenario of rapid rephasing in sharp density
transitions, as was recently demonstrated experimentally. Starting from a
phenomenological model we deduce expressions for the electron energy gain in
such density profiles. The results are in accordance with particle-in-cell
simulations and we present gain estimations for single and multiple stages of
rephasing
3D printing of gas jet nozzles for laser-plasma accelerators
Recent results on laser wakefield acceleration in tailored plasma channels
have underlined the importance of controlling the density profile of the gas
target. In particular it was reported that appropriate density tailoring can
result in improved injection, acceleration and collimation of laser-accelerated
electron beams. To achieve such profiles innovative target designs are
required. For this purpose we have reviewed the usage of additive layer
manufacturing, commonly known as 3D printing, in order to produce gas jet
nozzles. Notably we have compared the performance of two industry standard
techniques, namely selective laser sintering (SLS) and stereolithography (SLA).
Furthermore we have used the common fused deposition modeling (FDM) to
reproduce basic gas jet designs and used SLA and SLS for more sophisticated
nozzle designs. The nozzles are characterized interferometrically and used for
electron acceleration experiments with the Salle Jaune terawatt laser at
Laboratoire d'Optique Appliqu\'ee
Femtosecond x rays from laser-plasma accelerators
Relativistic interaction of short-pulse lasers with underdense plasmas has
recently led to the emergence of a novel generation of femtosecond x-ray
sources. Based on radiation from electrons accelerated in plasma, these sources
have the common properties to be compact and to deliver collimated, incoherent
and femtosecond radiation. In this article we review, within a unified
formalism, the betatron radiation of trapped and accelerated electrons in the
so-called bubble regime, the synchrotron radiation of laser-accelerated
electrons in usual meter-scale undulators, the nonlinear Thomson scattering
from relativistic electrons oscillating in an intense laser field, and the
Thomson backscattered radiation of a laser beam by laser-accelerated electrons.
The underlying physics is presented using ideal models, the relevant parameters
are defined, and analytical expressions providing the features of the sources
are given. Numerical simulations and a summary of recent experimental results
on the different mechanisms are also presented. Each section ends with the
foreseen development of each scheme. Finally, one of the most promising
applications of laser-plasma accelerators is discussed: the realization of a
compact free-electron laser in the x-ray range of the spectrum. In the
conclusion, the relevant parameters characterizing each sources are summarized.
Considering typical laser-plasma interaction parameters obtained with currently
available lasers, examples of the source features are given. The sources are
then compared to each other in order to define their field of applications.Comment: 58 pages, 41 figure
Observation of longitudinal and transverse self-injections in laser-plasma accelerators
Laser-plasma accelerators can produce high quality electron beams, up to
giga-electronvolts in energy, from a centimeter scale device. The properties of
the electron beams and the accelerator stability are largely determined by the
injection stage of electrons into the accelerator. The simplest mechanism of
injection is self-injection, in which the wakefield is strong enough to trap
cold plasma electrons into the laser wake. The main drawback of this method is
its lack of shot-to-shot stability. Here we present experimental and numerical
results that demonstrate the existence of two different self-injection
mechanisms. Transverse self-injection is shown to lead to low stability and
poor quality electron beams, because of a strong dependence on the intensity
profile of the laser pulse. In contrast, longitudinal injection, which is
unambiguously observed for the first time, is shown to lead to much more stable
acceleration and higher quality electron beams.Comment: 7 pages, 7 figure
Single shot phase contrast imaging using laser-produced Betatron x-ray beams
Development of x-ray phase contrast imaging applications with a laboratory
scale source have been limited by the long exposure time needed to obtain one
image. We demonstrate, using the Betatron x-ray radiation produced when
electrons are accelerated and wiggled in the laser-wakefield cavity, that a
high quality phase contrast image of a complex object (here, a bee), located in
air, can be obtained with a single laser shot. The Betatron x-ray source used
in this proof of principle experiment has a source diameter of 1.7 microns and
produces a synchrotron spectrum with critical energy E_c=12.3 +- 2.5 keV and
10^9 photons per shot in the whole spectrum.Comment: 3 pages, 3 figure
Probing electron acceleration and X-ray emission in laser-plasma accelerator
While laser-plasma accelerators have demonstrated a strong potential in the
acceleration of electrons up to giga-electronvolt energies, few experimental
tools for studying the acceleration physics have been developed. In this paper,
we demonstrate a method for probing the acceleration process. A second laser
beam, propagating perpendicular to the main beam is focused in the gas jet few
nanosecond before the main beam creates the accelerating plasma wave. This
second beam is intense enough to ionize the gas and form a density depletion
which will locally inhibit the acceleration. The position of the density
depletion is scanned along the interaction length to probe the electron
injection and acceleration, and the betatron X-ray emission. To illustrate the
potential of the method, the variation of the injection position with the
plasma density is studied
Angular momentum evolution in laser-plasma accelerators
The transverse properties of an electron beam are characterized by two
quantities, the emittance which indicates the electron beam extend in the phase
space and the angular momentum which allows for non-planar electron
trajectories. Whereas the emittance of electron beams produced in laser- plasma
accelerator has been measured in several experiments, their angular momentum
has been scarcely studied. It was demonstrated that electrons in laser-plasma
accelerator carry some angular momentum, but its origin was not established.
Here we identify one source of angular momentum growth and we present
experimental results showing that the angular momentum content evolves during
the acceleration
- …