Nondestructive leak testing

Method provides opportunity to effect repairs without compromising integrity of enclosed circuitry or mechanism by loss of atmosphere or by ingestion of foreign matter or gas. It is possible to detect leaks in modules which are sealed while fully evacuated, partially evacuated, or containing some form of gas

Water vapor diffusion membranes

The program is reported, which was designed to define the membrane technology of the vapor diffusion water recovery process and to test this technology using commercially available or experimental membranes. One membrane was selected, on the basis of the defined technology, and was subjected to a 30-day demonstration trial

Broadband stable power multiplier Patent

Solid state broadband stable power amplifie

The Validity of a Brief Vestibular Disorientation Test in Screening Pilot Trainees

Validity of brief vestibular disorientation test in screening pilot trainee

Theoretical and experimental studies of visco type and buffered shaft seals Semiannual progress report, 15 Oct. 1966 - 15 Apr. 1967

Theory and performance of viscoseal and buffered seal under laminar and turbulent condition

Application of higher harmonic blade feathering on the OH-6A helicopter for vibration reduction

The design, implementation, and flight test results of higher harmonic blade feathering for vibration reduction on the OH-6A helicopter are described. The higher harmonic control (HHC) system superimposes fourth harmonic inputs upon the stationary swashplate. These inputs are transformed into 3P, 4P and 5P blade feathering angles. This results in modified blade loads and reduced fuselage vibrations. The primary elements of this adaptive vibration suppression system are: (1) acceleration transducers sensing the vibratory response of the fuselage; (2) a higher harmonic blade pitch actuator system; (3) a flightworthy microcomputer, incorporating the algorithm for reducing vibrations, and (4) a signal conditioning system, interfacing between the sensors, the microcomputer and the HHC actuators. The program consisted of three distinct phases. First, the HHC system was designed and implemented on the MDHC OH-6A helicopter. Then, the open loop, or manual controlled, flight tests were performed, and finally, the closed loop adaptive control system was tested. In 1983, one portion of the closed loop testing was performed, and in 1984, additional closed loop tests were conducted with improved software. With the HHC system engaged, the 4P pilot seat vibration levels were significantly lower than the baseline ON-6A levels. Moreover, the system did not adversely affect blade loads or helicopter performance. In conclusion, this successful proof of concept project demonstrated HHC to be a viable vibration suppression mechanism

Cross-validation of a brief vestibular disorientation test administered by a variety of personnel

Cross validation of brief vestibular disorientation test during pilot training administered by variety of personne

Small V/STOL aircraft analysis, volume 1

A study has been made of the economic viability of advanced V/STOL aircraft concepts in performing general aviation missions. A survey of general aviation aircraft users, operators, and manufacturers indicated that personnel transport missions formulated around business executive needs, commuter air service, and offshore oil supply are the leading potential areas of application using VTOL aircraft. Advanced VTOL concepts potentially available in the late 1970 time period were evaluated as alternatives to privately owned contemporary aircraft and commercial airline service in satisfying these personnel transport needs. Economic analysis incorporating the traveler's value of time as the principle figure of merit were used to identify the relative merits of alternative VTOL air transportation concepts

Mission analysis data for inclined geosynchronous orbits, part 1

Data needed for preliminary design of inclined geosynchronous missions are provided. The inertial and Earth fixed coordinate systems are described, as well as orbit parameters and elements. The complete family of geosynchronous orbits is discussed. It is shown that circular inclined geosynchronous orbits comprise only one set in this family. The major orbit perturbation and their separate effects on the geosynchronous orbit are discussed. Detailed information on the orbit perturbation of inclined circular geosynchronous orbits is given, with emphasis on time history data of certain orbital elements. Orbit maintenance delta velocity (V) requirements to counteract the major orbit perturbations are determined in order to provide order of magnitude estimates and to show the effects of orbit inclination on delta V. Some of the considerations in mission design for a multisatellite system, such as a halo orbit constellation, are discussed

Three-dimensional measurements of fatigue crack closure

Fatigue crack growth and retardation experiments conducted in polycarbonate test specimen are described. The transparent test material allows optical interferometry measurements of the fatigue crack opening (and closing) profiles. Crack surface displacements are obtained through the specimen thickness and three dimensional aspects of fatigue crack closure are discussed