501 research outputs found
Spray nozzle designs for agricultural aviation applications
Techniques of generating monodisperse sprays and information concerning chemical liquids used in agricultural aviation are surveyed. The periodic dispersion of liquid jet, the spinning disk method, and ultrasonic atomization are the techniques discussed. Conceptually designed spray nozzles for generating monodisperse sprays are assessed. These are based on the classification of the drops using centrifugal force, on using two opposing liquid laden air jets, and on operating a spinning disk at an overloaded flow. Performance requirements for the designs are described and estimates of the operational characteristics are presented
Long-term operation of a multi-channel cosmic muon system based on scintillation counters with MRS APD light readout
A Cosmic Ray Test Facility (CRTF) is the first large-scale implementation of
a scintillation triggering system based on a new scintillation technique known
as START. In START, the scintillation light is collected and transported by WLS
optical fibers, while light detection is performed by pairs of avalanche
photodiodes with the Metal-Resistor-Semiconductor structure operated in the
Geiger mode (MRS APD). START delivers 100% efficiency of cosmic muon detection,
while its intrinsic noise level is less than 10^{-2} Hz. CRTF, consisting of
160 START channels, has been continuously operated by the ALICE TOF
collaboration for more than 25 000 hours, and has demonstrated a high level of
stability. Fewer than 10% of MRS APDs had to be replaced during this period.Comment: Proceedings of NDIP-2008. 8 pages, 8 figures, 6 reference
Scintillation counter with MRS APD light readout
START, a high-efficiency and low-noise scintillation detector for ionizing
particles, was developed for the purpose of creating a high-granular system for
triggering cosmic muons. Scintillation light in START is detected by MRS APDs
(Avalanche Photo-Diodes with Metal-Resistance-Semiconductor structure),
operated in the Geiger mode, which have 1 mm^2 sensitive areas. START is
assembled from a 15 x 15 x 1 cm^3 scintillating plastic plate, two MRS APDs and
two pieces of wavelength-shifting optical fiber stacked in circular coils
inside the plastic. The front-end electronic card is mounted directly on the
detector. Tests with START have confirmed its operational consistency, over 99%
efficiency of MIP registration and good homogeneity. START demonstrates a low
intrinsic noise of about 10^{-2} Hz. If these detectors are to be
mass-produced, the cost of a mosaic array of STARTs is estimated at a moderate
level of 2-3 kUSD/m^2.Comment: 6 pages, 5 figure
The Use of Flow Model Analysis (FMA) in the Case of Incomplete Mathematical Models
The main aim of the "System for Analyzing Mathematical Flow Models" (FMA system) described in this paper is to supply the decision-maker with a computerized tool for quantitative investigation of problem that can be described, at least partially, in terms of standard mathematical models of the Bow type.
The FMA system permits the decision-maker to find states of the considered model that satisfy all introduced constraints, are close to the desirable structure, and are optimal with respect to single- or multiobjective evaluation
- …