The AEI 10 m prototype interferometer

A 10 m prototype interferometer facility is currently being set up at the AEI in Hannover, Germany. The prototype interferometer will be housed inside a 100 m^3 ultra-high vacuum envelope. Seismically isolated optical tables inside the vacuum system will be interferometrically interconnected via a suspension platform interferometer. Advanced isolation techniques will be used, such as inverted pendulums and geometrical anti-spring filters in combination with multiple-cascaded pendulum suspensions, containing an all-silica monolithic last stage. The light source is a 35 W Nd:YAG laser, geometrically filtered by passing it through a photonic crystal fibre and a rigid pre-modecleaner cavity. Laser frequency stabilisation will be achieved with the aid of a high finesse suspended reference cavity in conjunction with a molecular iodine reference. Coating thermal noise will be reduced by the use of Khalili cavities as compound end mirrors. Data acquisition and control of the experiments is based on the AdvLIGO digital control and data system. The aim of the project is to test advanced techniques for GEO 600 as well as to conduct experiments in macroscopic quantum mechanics. Reaching standard quantum-limit sensitivity for an interferometer with 100 g mirrors and subsequently breaching this limit, features most prominently among these experiments. In this paper we present the layout and current status of the AEI 10 m Prototype Interferometer project

Frequency noise and intensity noise of next-generation gravitational-wave detectors with RF/DC readout schemes

The sensitivity of next-generation gravitational-wave detectors such as Advanced LIGO and LCGT should be limited mostly by quantum noise with an expected technical progress to reduce seismic noise and thermal noise. Those detectors will employ the optical configuration of resonant-sideband-extraction that can be realized with a signal-recycling mirror added to the Fabry-Perot Michelson interferometer. While this configuration can reduce quantum noise of the detector, it can possibly increase laser frequency noise and intensity noise. The analysis of laser noise in the interferometer with the conventional configuration has been done in several papers, and we shall extend the analysis to the resonant-sideband-extraction configuration with the radiation pressure effect included. We shall also refer to laser noise in the case we employ the so-called DC readout scheme.Comment: An error in Fig. 10 in the published version in PRD has been corrected in this version; an erratum has been submitted to PRD. After correction, this figure reflects a significant difference in the ways RF and DC readout schemes are susceptible to laser noise. In addition, the levels of mirror loss imbalances and input laser amplitude noise have also been updated to be more realistic for Advanced LIG

Demonstration of displacement-noise-free interferometry using bi-directional Mach–Zehnder interferometers

We have demonstrated displacement- and frequency-noise-free laser interferometry (DFI) by partially implementing a recently proposed optical configuration using bi-directional Mach–Zehnder interferometers (MZIs). This partial implementation, the minimum necessary to be called DFI, has confirmed the essential feature of DFI: the combination of two MZI signals can be carried out in a way that cancels the displacement noise of the mirrors and beam splitters while maintaining gravitational-wave signals. The attained maximum displacement noise suppression was 45 dB

The Experimental plan of the 4m Resonant Sideband Extraction Prototype for The LCGT

The 4m Resonant Sideband Extraction (RSE) interferometer is a planned prototype of the LCGT interferometer. The aim of the experiment is to operate a powerrecycled Broadband RSE interferometer with suspended optics and to achieve diagonalization of length signals of the central part of the interferometer directly through the optical setup. Details of the 4m RSE interferometer control method as well as the design of the experimental setup will be presented

Utility investigation of artificial time delay in displacement-noise-free interferometers

Laser interferometer gravitational wave detectors are usually limited by displacement noise in their lower frequency band. Recently, theoretical proposals have been put forward to construct schemes of interferometry that are insusceptible to displacement noise as well as classical laser noise. These so-called displacement-noise-free interferometry (DFI) schemes take advantage of the difference between gravitational waves and displacement noise in their effects on light propagation. However, since this difference diminishes in lower frequencies (i.e., Omega>[script L]D/c) into the interferometry scheme, with the hope of improving low-frequency sensitivity. We found that sensitivity can only be improved by schemes in which fluctuations in the artificial time delays are not canceled

The experimental plan of displacement- and frequency-noise free laser interferometer

We present the partial demonstration of displacement- and laser-noise free interferometer (DFI) and the next experimental plan to examine the complete configuration. A part of the full implementation of DFI has been demonstrated to confirm the cancellation of beamsplitter displacements. The displacements were suppressed by about two orders of magnitude. The aim of the next experiment is to operate the system and to confirm the cancellation of all displacement noises, while the gravitational wave (GW) signals survive. The optical displacements will be simulated by electro-optic modulators (EOM). To simulate the GW contribution to laser lights, we will use multiple EOMs

Diagonalization of the length sensing matrix of a dual recycled laser interferometer gravitational wave antenna

Next generation gravitational wave antennas employ resonant sideband extraction (RSE) interferometers with Fabry-Perot cavities in the arms as an optical configuration. In order to realize stable, robust control of the detector system, it is a key issue to extract appropriate control signals for longitudinal degrees of freedom of the complex coupled-cavity system. In this paper, a novel length sensing and control scheme is proposed for the tuned RSE interferometer that is both simple and efficient. The sensing matrix can be well diagonalized, owing to a simple allocation of two rf modulations and to a macroscopic displacement of the cavity mirrors, which cause a detuning of the rf modulation sidebands

Length Sensing and Control for AdLIGO

LIGO Document T060272-00-I (2006