104,194 research outputs found
Magnesium and magnesium alloys as degradable metallic biomaterials
Drawbacks associated with permanent metallic implants lead to the search for degradable metallic biomaterials. Magnesium has been considered as it is essential to bodies and has a high biodegradation potential. For magnesium and its alloys to be used as biodegradable implant materials, their degradation rates should be consistent with the rate of healing of the affected tissue, and the release of the degradation products should be within the body's acceptable absorption levels. Conventional magnesium degrades rapidly, which is undesirable. In this study, biodegradation behaviours of high purity magnesium and commercial purity magnesium alloy AZ31 in both static and dynamic Hank's solution have been systematically investigated. The results show that magnesium purification and selective alloying are effective approaches to reduce the degradation rate of magnesium. In the static condition, the corrosion products accumulate on the materials surface as a protective layer, which results in a lower degradation rate than the dynamic condition. Anodised coating can significantly further reduce the degradation rate of magnesium. This study indicates that magnesium can be used as degradable implant materials as long as the degradation is controlled at a low rate. Magnesium purification, selective alloying and anodised coating are three effective approaches to reduce the rate of degradation
Tests of Functional Form and Heteroscedasticity
This paper considers tests of misspecification in a heteroscedastic transformation model. We derive Lagrange multiplier (LM) statistics for (i) testing functional form and heteroscedasticity jointly, (ii) testing functional form in the presence of heteroscedasticity, and (iii) testing heteroscedasticity in the presence of data transformation. We present LM statistics based on the expected information matrix. For cases (i) and (ii), this is done assuming the Box-Cox transformation. For case (iii), the test does not depend on whether the functional form is estimated or pre-specified. Small-sample properties of the tests are assessed by Monte Carlo simulation, and comparisons are made with the likelihood ratio test and other versions of LM test. The results show that the expected-information based LM test has the most appropriate finite-sample empirical sizeFunctional Form, Heterscedasticity, Lagrange Multiplier Test
Tests of Functional Form and Heteroscedasticity
This paper considers tests of misspecification in a heteroscedastic transformation model. We derive Lagrange multiplier (LM) statistics for (i) testing functional form and heteroscedasticity jointly, (ii) testing functional form in the presence of heteroscedasticity, and (iii) testing heteroscedasticity in the presence of data transformation. We present LM statistics based on the expected information matrix. For cases (i) and (ii), this is done assuming the Box-Cox transformation. For case (iii), the test does not depend on whether the functional form is estimated or pre-specified. Small-sample properties of the tests are assessed by Monte Carlo simulation, and comparisons are made with the likelihood ratio test and other versions of LM test. The results show that the expected-information based LM test has the most appropriate finite-sample empirical siFunctional Form, Hetersocedasticity, Lagrange Multiplier Test
A comparative analysis of the value of information in a continuous time market model with partial information: the cases of log-utility and CRRA
We study the question what value an agent in a generalized Black-Scholes model with partial information attributes to the complementary information. To do this, we study the utility maximization problems from terminal wealth for the two cases partial information and full information. We assume that the drift term of the risky asset is a dynamic process of general linear type and that the two levels of observation correspond to whether this drift term is observable or not. Applying methods from stochastic filtering theory we derive an analytical tractable formula for the value of information in the case of logarithmic utility. For the case of constant relative risk aversion (CRRA) we derive a semianalytical formula, which uses as an input the numerical solution of a system of ODEs. For both cases we present a comparative analysis
Recommended from our members
Investigation of Shallow Sedimentary Structure of the Anchorage Basin, Alaska, Using Simulated Annealing Inversion of Site Response
This study deals with shallow sedimentary structure of the Anchorage basin in Alaska. For this purpose, inversion of site response [SR(f)] data in the frequency range 0.5-11.0 Hz from various sites of the basin has been performed using the simulated annealing method to compute subsurface layer thickness, shear-wave velocity (beta), density, and shear-wave quality factor. The one-dimensional (1D) models for the aforementioned parameters were obtained with preset bounds on the basis of available geological information such that the L-2 norm error between the observed and computed site response attained a global minimum. Next, the spatial distribution of the important parameter beta was obtained by interpolating values yielded by the 1D models. The results indicate the presence of three distinct velocity zones as the source of spatial variation of SR(f) in the Anchorage basin. In the uppermost part of the basin, the beta values of fine-grain Quaternary sediments mainly lie in the range of 180-500 m/sec with thickness varying from 15 to 50 m. This formation overlies relatively thick (80-200 m) coarse-grain Quaternary sediments with beta values in the range of 600-900 m/sec. These two Quaternary units are, in turn, overlain on Tertiary sediments with beta > 1000 m/sec located at depths of 100 and 250 m, respectively, in the central and western side along the Knik Arm parts of the basin. The important implication of the result is that the sources of spatial variation of SR(f) in the Anchorage basin for the frequency band 0.5-11 Hz, besides in the uppermost 30 m, are found to be deeper than this depth. Thus, use of commonly considered geological formations in the depth intervals from 0 to 30 m for the ground-motion interpretation will likely yield erroneous results in the Anchorage basin.GIEnvironment and Natural Resources InstituteSchool of Engineering of the University of Alaska, AnchorageGeological Science
General covariant geometric momentum, gauge potential and a Dirac fermion on a two-dimensional sphere
For a particle that is constrained on an ()-dimensional ()
curved surface, the Cartesian components of its momentum in -dimensional
flat space is believed to offer a proper form of momentum for the particle on
the surface, which is called the geometric momentum as it depends on the mean
curvature. Once the momentum is made general covariance, the spin connection
part can be interpreted as a gauge potential. The present study consists in two
parts, the first is a discussion of the general framework for the general
covariant geometric momentum. The second is devoted to a study of a Dirac
fermion on a two-dimensional sphere and we show that there is the generalized
total angular momentum whose three cartesian components form the
algebra, obtained before by consideration of dynamics of the particle, and we
demonstrate that there is no curvature-induced geometric potential for the
fermion.Comment: 8 pages, no figure. Presentation improve
- …