Adhesion of endothelial cells and adsorption of serum proteins on gas plasma-treated polytetrafluoroethylene

From in vitro experiments it is known that human endothelial cells show poor adhesion to hydrophobic polymers. The hydrophobicity of vascular prostheses manufactured from Teflon® or Dacron® may be the reason why endothelialization of these grafts does not occur after implantation in humans. We modified films of polytetrafluoroethylene (Teflon®) by nitrogen plasma and oxygen plasma treatments to make the surfaces more hydrophilic. Depending on the plasma exposure time, modified polytetrafluoroethylene surfaces showed water-contact angles of 15–58°, versus 96° for unmodified polytetrafluoroethylene. ESCA measurements revealed incorporation of both nitrogen- and oxygen-containing groups into the polytetrafluoroethylene surfaces, dependent on the plasma composition and exposure time. The thickness of the modified surface layer was ~1 nm. The adhesion of cultured human endothelial cells from 20% human serum-containing culture medium to modified polytetrafluoroethylene surfaces with contact angles of 20–45° led to the formation of a monolayer of cells, which was similar to the one formed on tissue culture polystyrene, the reference surface. This was not the case when endothelial cells were seeded upon unmodified polytetrafluoroethylene. Surface-modified expanded polytetrafluoroethylene prosthesis material (GORE TEX® soft tissue) also showed adhesion of endothelial cells comparable to cell adhesion to the reference surface. The amounts of serum proteins, including fibronectin, adsorbed from serumcontaining medium to modified polytetrafluoroethylene surfaces were larger than those adsorbed to unmodified polytetrafluoroethylene. Moreover, the modified surfaces probably allow the exchange of adsorbed serum proteins with cellular fibronectin

Processing, microstructure, and elevated temperature mechanical properties of MoSi2 containing Er2Mo3Si4 and Er2O3 particles

Powders of MoSi2 containing Er2Mo3Si4 and Er2O3 particles were produced by abll milling rice-melted buttons of MoSi2 containing 20 vol.% Er2Mo3Si4. Two composites with grain diameters of 9 and 16 [mu]m were produced by hot pressing the powders to 98% of theoretical density at 1565 [deg]C and 1650 [deg]C respectively. Some evidence of mechanical alloying was observed, but the majority of the Er2Mo3Si4 and Er2O3 particles were situated on grain boundaries. Compressive decremental step-strain rate tests were performed in the homologous temperature range of 0.54 Tm to 0.7 Tm (1100-1400 [deg]C) for strain rates ranging from 5 x 10-4 s-1 to 1 x 10-6 s-1. Nominal values for the stress exponent, n, and the activation energy for creep, Q, were determined using a constitutive equation for power-law creep. Below 1200 [deg]C, creep was controlled by dislocation climb and glide mechanisms with n [approximate] 4.5 and Q 425 +/- 15 kJ mol-1. At 1300 [deg]C and above, the creep resistance was shown to be grain size dependent with creep resistance increasing with larger grain size.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/31129/1/0000026.pd

Cerium reduction at the interface between ceria and yttria-stabilised zirconia and implications for interfacial oxygen non-stoichiometry

Epitaxial CeO2 films with different thickness were grown on Y2O3 stabilised Zirconia substrates. Reduction of cerium ions at the interface between CeO2 films and yttria stabilised zirconia substrates is demonstrated using aberration-corrected scanning transmission electron microscopy combined with electron energy-loss spectroscopy. It is revealed that most of the Ce ions were reduced from Ce 4+ to Ce3+ at the interface region with a decay of several nanometers. Several possibilities of charge compensations are discussed. Irrespective of the details, such local non-stoichiometries are crucial not only for understanding charge transport in such hetero-structures but also for understanding ceria catalytic properties

Evidence for orbital ordering in LaCoO3

We present powder and single crystal X-ray diffraction data as evidence for a monoclinic distortion in the low spin (S=0) and intermediate spin state (S=1) of LaCoO3. The alternation of short and long bonds in the ab plane indicates the presence of eg orbital ordering induced by a cooperative Jahn-Teller distortion. We observe an increase of the Jahn-Teller distortion with temperature in agreement with a thermally activated behavior of the Co3+ ions from a low-spin ground state to an intermediate-spin excited state.Comment: Accepted to Phys. Rev.

ON COMPUTER SIMULATION AS A COMPONENT IN INFORMATION SYSTEMS RESEARCH

Computer simulation is widely regarded as a useful activity during various phases of research. However, depending on its context, the meaning, definition, and focus of the term can vary: In traffic planning, for example, simulation is used to determine useful configurations of a road network, thus focusing on the environment. An entirely different perspective is used within multi-agent systems. In such settings, the environment of the agents remains static, while the interesting research questions concern the behavior of the agents themselves. The research focuses on the microscopic level and the resulting emergent behavior. This article puts such diverse meanings in the context of a research process that treats descriptive and prescriptive research as two sides of the same coin. We develop a framework to classify different types of simulation, based on the actual research activity they are intended to be used for. Two case studies supplement the framework