Soil Movements Due to Displacement Pile Driving

The effects of displacement piling are well documented with many cases of movements caused to adjacent structures and detrimental effects on recently installed piles. The author’s experience with dealing with ground displacements of raft piling in deep marine clays in Singapore led to the development of a method for calculating the ground movements to assess the cumulative effects of pile driving. The method is derived from soil mechanics parameters, principle of potential energy, strain energy and work done by the stresses in the soil undergoing a cylindrical cavity expansion process and the stresses in the soil undergoing large strains direct shearing process due to the pile shaft friction. Published case histories of ground displacements have been back-analysed. The calculated movements compared well with these past field tests and laboratory experimental data. In the moderate to far field distances from the pile, the heave to lateral displacements can be expressed as a function of the ratio of lateral forces to soil weight. For near field distances, the calculations show that the heave reaches a maximum, then turns sharply into a downdrag near to the pile shaft. The method is, however, unstable at distances close to the pile shaft

The Y-box factor ZONAB/DbpA associates with GEF-H1/Lfc and mediates Rho-stimulated transcription

Epithelial tight junctions recruit different types of signalling proteins that regulate cell proliferation and differentiation. Little is known about how such proteins interact functionally and biochemically with each other. Here, we focus on the Y-box transcription factor ZONAB (zonula occludens 1-associated nucleic-acid-binding protein)/DbpA (DNA-binding protein A) and the Rho GTPase activator guanine nucleotide exchange factor (GEF)-H1/Lbc's first cousin, which are two tight-junction-associated signalling proteins that regulate proliferation. Our data show that the two proteins interact and that ZONAB activity is Rho-dependent. Overexpression of GEF-H1 induces accumulation of ZONAB in the nucleus and activates transcription. Microtubule-affinity regulating kinase/partition-defective-1, another type of GEF-H1-associated signalling protein, remains in the cytoplasm and partially co-localizes with the exchange factor. GEF-H1 and ZONAB are required for expression of endogenous cyclin D1, a crucial RhoA signalling target gene, and GEF-H1-stimulated cyclin D1 promoter activity requires ZONAB. Our data thus indicate that GEF-H1 and ZONAB form a signalling module that mediates Rho-regulated cyclin D1 promoter activation and expression

Development of a low actuation voltage RF MEMS switch

This paper reports on the design of a novel ultra low actuation voltage, low loss radio frequency micro-electro-mechanical system (RF MEMS) capacitive shunt switch. The concept of the switch relies on a mechanically unconstrained armature actuated over a coplanar waveguide using electrostatic forces. The minimum actuation voltage of the switch is <2V, with an isolation of 40dB and insertion loss <0.7dB at 78GHz

Comparison Study of Two Different Sun-Tracking Methods in Optical Efficiency of Heliostat Field

There are two sun-tracking methods widely used for the heliostat, which are conventional Azimuth-Elevation and revolutionary Spinning-Elevation methods. Following the previous study to compare the range of motion, a comparison study in optical efficiency of heliostat field for the two methods is further explored in this paper. A special algorithm using ray-tracing technique has also been developed to simulate the optical efficiency of heliostat field for both sun-tracking methods in different latitudes. With the new algorithm, comprehensive analysis to compare the optical efficiency of individual heliostat and the overall heliostat field for the two sun-tracking methods has been carried out

Calibration and accuracy assessment of Leica ScanStation C10 terrestrial laser scanner

Requirement of high accuracy data in surveying applications has made calibration procedure a standard routine for all surveying instruments. This is due to the assumption that all observed data are impaired with errors. Thus, this routine is also applicable to terrestrial laser scanner (TLS) to make it available for surveying purposes. There are two calibration approaches: (1) component, and (2) system calibration. With the intention to specifically identify the errors and accuracy of the Leica ScanStation C10 scanner, this study investigates component calibration. Three components of calibration were performed to identify the constant, scale error, accuracy of angular measurement and the effect of angular resolution for distance measurement. The first calibration has been processed using closed least square solutions and has yielded the values of constant (1.2 mm) and scale error (1.000008879). Using variance ratio test (F-Test), angles observation (horizontal and vertical) for Leica C10 scanner and Leica TM5100A theodolite have shown significance difference. This is because the accuracy of both sensors are not similar and these differences are 0.01 and 0.0075º for horizontal and vertical measurements, respectively. Investigation on the resolution setting for Leica C10 scanner has highlighted the drawback of the tilt-and-turn target. Using the highest resolution, Leica Cyclone software only able to recognize the tilt-and-turn target up to 10 m distance compare to 200 m for the black and white target

Mode-coupling theory for structural and conformational dynamics of polymer melts

A mode-coupling theory for dense polymeric systems is developed which unifyingly incorporates the segmental cage effect relevant for structural slowing down and polymer chain conformational degrees of freedom. An ideal glass transition of polymer melts is predicted which becomes molecular-weight independent for large molecules. The theory provides a microscopic justification for the use of the Rouse theory in polymer melts, and the results for Rouse-mode correlators and mean-squared displacements are in good agreement with computer simulation results.Comment: 4 pages, 3 figures, Phys. Rev. Lett. in pres

Steady-state Ab Initio Laser Theory: Generalizations and Analytic Results

We improve the steady-state ab initio laser theory (SALT) of Tureci et al. by expressing its fundamental self-consistent equation in a basis set of threshold constant flux states that contains the exact threshold lasing mode. For cavities with non-uniform index and/or non-uniform gain, the new basis set allows the steady-state lasing properties to be computed with much greater efficiency. This formulation of the SALT can be solved in the single-pole approximation, which gives the intensities and thresholds, including the effects of nonlinear hole-burning interactions to all orders, with negligible computational effort. The approximation yields a number of analytic predictions, including a "gain-clamping" transition at which strong modal interactions suppress all higher modes. We show that the single-pole approximation agrees well with exact SALT calculations, particularly for high-Q cavities. Within this range of validity, it provides an extraordinarily efficient technique for modeling realistic and complex lasers.Comment: 17 pages, 11 figure

Superconductivity and Magnetism in REFeAsO1-xFx (RE=Rare Earth Elements)

Fluoride-doped iron-based oxypnictides containing rare-earth gadolinium (GdFeAsO0.8F0.2) and co-doping with yttrium (Gd0.8Y0.2FeAsO0.8F0.2) have been prepared via conventional solid state reaction at ambient pressure. The non-yttrium substituted oxypnictide show superconducting transition as high as 43.9 K from temperature dependent resistance measurements with the Meissner effect observed at a lower temperature of 40.8 K from temperature dependent magnetization measurements. By replacing a small amount of gadolinium with yttrium Tc was observed to be lowered by 10 K which might be caused by a change in the electronic or magnetic structures since the crystal structure was not altered.Comment: 4 pages, 4 figures, Journal of Physics: Conference Series (Proceedings in the LT25 Low Temperature Physics Conference) Submitte

Origins of ferromagnetism in transition-metal doped Si

We present results of the magnetic, structural and chemical characterizations of Mn<sup>+</sup>-implanted Si displaying <i>n</i>-type semiconducting behavior and ferromagnetic ordering with Curie temperature,T<sub>C</sub> well above room temperature. The temperature-dependent magnetization measured by superconducting quantum device interference (SQUID) from 5 K to 800 K was characterized by three different critical temperatures (T*<sub>C</sub>~45 K, T<sub>C1</sub>~630-650 K and T<sub>C2</sub>~805-825 K). Their origins were investigated using dynamic secondary mass ion spectroscopy (SIMS) and transmission electron microscopy (TEM) techniques, including electron energy loss spectroscopy (EELS), Z-contrast STEM (scanning TEM) imaging and electron diffraction. We provided direct evidences of the presence of a small amount of Fe and Cr impurities which were unintentionally doped into the samples together with the Mn<sup>+</sup> ions, as well as the formation of Mn-rich precipitates embedded in a Mn-poor matrix. The observed T*<sub>C</sub> is attributed to the Mn<sub>4</sub>Si<sub>7</sub> precipitates identified by electron diffraction. Possible origins of and are also discussed. Our findings raise questions regarding the origin of the high ferromagnetism reported in many material systems without a careful chemical analysis

Composting paper and grass clippings with anaerobically treated palm oil mill effluent

Purpose The purpose of this study is to investigate the composting performance of anaerobically treated palm oil mill effluent (AnPOME) mixed with paper and grass clippings. Methods Composting was conducted using a laboratory scale system for 40 days. Several parameters were determined: temperature, mass reduction, pH, electrical conductivity, colour, zeta potential, phytotoxicity and final compost nutrients. Results The moisture content and compost mass were reduced by 24 and 18 %, respectively. Both final compost pH value and electrical conductivity were found to increase in value. Colour (measured as PtCo) was not suitable as a maturity indicator. The negative zeta potential values decreased from −12.25 to −21.80 mV. The phytotoxicity of the compost mixture was found to decrease in value during the process and the final nutrient value of the compost indicates its suitability as a soil conditioner. Conclusions From this study, we conclude that the addition of paper and grass clippings can be a potential substrate to be composted with anaerobically treated palm oil mill effluent (AnPOME). The final compost produced is suitable for soil conditioner