Developmental dynamics of cone photoreceptors in the eel

Background: Many fish alter their expressed visual pigments during development. The number of retinal opsins expressed and their type is normally related to the environment in which they live. Eels are known to change the expression of their rod opsins as they mature, but might they also change the expression of their cone opsins?Results: The Rh2 and Sws2 opsin sequences from the European Eel were isolated, sequenced and expressed in vitro for an accurate measurement of their lambda(max) values. In situ hybridisation revealed that glass eels express only rh2 opsin in their cone photoreceptors, while larger yellow eels continue to express rh2 opsin in the majority of their cones, but also have <5% of cones which express sws2 opsin. Silver eels showed the same expression pattern as the larger yellow eels. This observation was confirmed by qPCR (quantitative polymerase chain reaction).Conclusions: Larger yellow and silver European eels express two different cone opsins, rh2 and sws2. This work demonstrates that only the Rh2 cone opsin is present in younger fish (smaller yellow and glass), the sws2 opsin being expressed additionally only by older fish and only in <5% of cone cells

Carbon Efficiency of Humanitarian Supply Chains: Evidence from French Red Cross operations

Natural catastrophes are often amplified by man-made impact on the environment. Sustainability is identified as a major gap in humanitarian logistics research literature. Although humanitarian supply chains are designed for speed and sustainability is of minor concern, environmentally-friendly behavior (e.g. through reduction of transportation emissions and avoidance of non-degradable materials) should be a long-term concern as it may ultimately affect more vulnerable regions. The purpose of this paper is to illustrate how green house gas emissions can be measured using the supply chain of common relief items in humanitarian logistics. We analyze the CO2 emissions of selected supply chains by performing Life Cycle Assessments based on data provided by the French Red Cross. We calculate the CO2 emissions of the items from ‘cradle to grave’ including production, transportation, warehousing and disposal. Using these calculations, we show that transporting relief items causes the majority of emissions; however, transportation modes may not always be changed as the main purpose of humanitarian supply chains is speed. Nevertheless, strategic and efficient pre-positioning of main items will translate into less transportation and thus reducing the environmental impact. The study also shows that initiatives for “greening” item production and disposal can improve the overall carbon efficiency of humanitarian supply chains

Fractional Generalization of Gradient Systems

We consider a fractional generalization of gradient systems. We use differential forms and exterior derivatives of fractional orders. Examples of fractional gradient systems are considered. We describe the stationary states of these systems.Comment: 11 pages, LaTe

Fractional Variations for Dynamical Systems: Hamilton and Lagrange Approaches

Fractional generalization of an exterior derivative for calculus of variations is defined. The Hamilton and Lagrange approaches are considered. Fractional Hamilton and Euler-Lagrange equations are derived. Fractional equations of motion are obtained by fractional variation of Lagrangian and Hamiltonian that have only integer derivatives.Comment: 21 pages, LaTe

Wave Energy

Part of the immense solar energy input to the earth is converted by natural processes into energy associated with ocean waves. The geographical location of the United Kingdom renders it one of the world ' s most favoured countries with respect to the potential availability of wave energy. In principle. the waves reaching our coastal waters from the North Atlantic might satisfy a considerable fraction of our electricity demand provided that reasonably high overall conversion efficiencies can be achieved . Inventors have recognised the power of the sea for many decades. and there has been no lack of ideas on how it might be tapped . But none of the ideas was developed on a substantial scale. since ample and relatively cheap supplies of other resources were always available . In recent years. however. there has been a growing recognition that--on a world scale-the presently used forms of energy may become too expensive,. too scarce or otherwise unavailable to meet our energy needs by themselves . The Government's responsibility is to ensure that as wide a range as possible of energy supply options are available when they may be needed . Research and development can provide the necessary technical and econom i c data on which the ultimate choices can be made . Within this context. the Government announced in 197 6 the start of an R and D programme on wave energy for which the first phase was to be a feasibility study lasting for two years. The funding level has been increased twice since that time to maintain the momentum of the programme in the light of technical progress . The programme has had three main components: -exploratory deve lopment of several different engineering concepts of wave energy converter; -supporting research in relevant engineering and scientific areas : • the collection and analysis of wave data. • analysis of the structural response to wave-induced motions. • mooring. • energy conversion and transm issi on. • environmental aspects ; -working up preliminary reference designs of full scale stations for tech nical and economic appraisal. The purpose of this paper is to review the present state of knowledge of wave energy in the light of the achievements of the first two-year phase of the programme . Development of the converters Four potential designs of converter were adopted for initial study. since the sparse data available were insufficient to enable a single concept to be chosen with confidence. Proposals for alternative concepts are received on a continuing basis and are assessed against a number of criteria: two of them have so far been added to the programme in order to explore new principles Apart from the basic technical differences the six designs differ from each other in their degree of complexity and their state of development. as described in Chapter 3 . Work on two of the designs has been advanced from laboratory wave tanks to the testing of 1 / 1 0th scale models in natural open water at Loch Ness and in the Solent. For all the designs . a combination of theoretical studies. laboratory work and engineering appraisal has clarified the factors which will prove to be the most crucial in determining which of them could be chosen for more extensive development. The programme has progressed from establishing the scientific feasibility of wave energy converters to confirming the engineering feasibility of designing and building some of the designs . In very broad terms: -the early part of the programme placed considerable emphasis on optimising the efficiency of extraction of the wave energy and proving the scientific feasibility ; -the present stage is concerned with the technical viability and is identifying the main cost centres in the designs . which can then be tackled by further R and D; -the immediate future must also place emphasis not only on the problems of construction . operation and maintenance. and on ways in which unit costs may be reduced . but also on the ability to survive in the most severe wave conditions . Whilst the technical feasibility of some types of converter has been established, we are far from the stage of recommending that a full scale generating station should be built . Of the four original concepts. no single design has yet emerged which is outstandingly better than the other designs when all factors are taken into account . The designs have changed considerably in the course of the feasibility study. and a continuing process of evol ution can be expected as in the early stages of any technical development programme. The optimum design may emerge from further changes in one of the original concepts. from a synthesis of ideas or from an alternative concept . The wave energy is distributed over a wide frequency and energy bandwidth and no des ign has yet been optimised to operate at or near peak efficiency over the whole spectrum. However, one of the new concepts introduced into the programme recently may offer significant advantages in this respect. Supporting research The extent of the available data on waves in the sea areas of primary interest is inadequate as yet for the full assessment of the resource . A start has been made in collecting and analysing new data. which will take several years to reach a satisfactory level. The results so far confirm the general point that the locations around the United Kingdom with the most abundant wave energy lie to the west of the Outer Hebrides, where several hundred km of searoom are available with average annual power levels in the range 35-60 kW / m of wavefront. The majority of the designs un der consideration are free-floating and the converters would operate on or near the water surface-- one of the most hostile environments for engineering structures . The ult imate feasibility. technical and economic . of all designs of floating converter will depend upon extensive further work on mooring and anchoring . Whilst over-designed mooring systems based on present knowledge have allowed the open water trials to proceed with the objective of gaining experience . the existing knowledge is not adequate to design cost-effective mooring systems which will ensure survival at full scale under storm conditions . Considerable progress has been made in assessing and under3tanding suitable energy conversion and transmission systems for the various designs of converter , but much more remains to be done to arrive at the most cost-effective solutions . The general engineering difficulties are quite basic and are related to the properties of the natural wave spectrum : -the conversion system must be able to handle large short-term variations in the instantaneous power level ; -the peak power level in the sea (of the order of 10,OOO kW /m) can be many times greater than the average power level (a few tens of kW / m) ; -the primary output is not in a form which can be handled conventionally (it is . of course . variable with time in a complex way). Moreover. apart from the randomness. other general problems arise from the low energy density of the input and the relatively low speeds and frequency of movement induced by the waves . Engineering devices to transmit large amounts of energy under such conditions must themselves be large. heavy and expensive . The efficient generation of electricity requires machinery operating at relatively high and preferably constant speed . The transition from the one regime to the other appears to be more straightforward for systems involving air turbines than for those which do not: some designs of converter may prove to be intractable in this respect. Many possible forms of energy transmission to the mainland have been reviewed . as summarised in Chapter 6 . Whilst it has been recommended that several options should be kept open in the continuing studies it is likely that most attention will be given to electricity. The overall flow of energy from the waves to a final user connected to the electricity grid involves many separate steps . each of which can involve loss of some of the energy . This can have a considerable influence on the system economics and further work in this area will need to concentrate on both reducing the number of steps and increasing the efficiency (including the directional efficiency of t he converters themselves ) of those which must remain . Unless this can be achieved the usable resource will be only a small proportion of our needs : some pointers to substantial improvements are beginning to emerge. Environmental studies have not revealed any major detrimental effects of the converters provided they are well offshore. More information is needed on the behaviour of salmon and herring off the Outer Hebrides to confirm that the fisheries would not be affected significantly by the widespread installation of converters. Concluding remarks: The costing studies of the reference designs which have been evolved so far indicate that wave-produced electricity is likely to be expensive compared with either nuclear or fossil fuels unless some major breakthrough in the engineering can be achieved . However . this does not imply that the possibility of wave energy should be abandoned at this stage . It must be emphasised that the subject is still at a very ear ly state of development and many unknown factors remain to be resolved . Under these circumstances, wave energy is best regarded at present as a possible insurance technology- the consequences of failure of one of our existing major energy supplies are so severe that it is worth paying an insurance premium to explore fully the alternatives . Nevertheless. the evidence from the feasibility study so far does not allow a recommendation for a full-scale development programme to be made at this time . Much more can be achieved to explore and then to narrow the design choices by continuing work at about the 1 / 1 0th scale coupled with . on the one hand . limited trials of some critical components at larger scale and . on the other hand . f urther creative engineering on the drawing board and laboratory work in a new generation of wave tanks (of which the forerunner has been successfully commissioned at Edinburgh University). The programme has generated a broad basis of knowledge of all aspects of wave energy which did not exist before. so that we can now identify clearly the critical problems to be tackled by further work

Prospects of micromass culture technology in tissue engineering

Tissue engineering of bone and cartilage tissue for subsequent implantation is of growing interest in cranio- and maxillofacial surgery. Commonly it is performed by using cells coaxed with scaffolds. Recently, there is a controversy concerning the use of artificial scaffolds compared to the use of a natural matrix. Therefore, new approaches called micromass technology have been invented to overcome these problems by avoiding the need for scaffolds. Technically, cells are dissociated and the dispersed cells are then reaggregated into cellular spheres. The micromass technology approach enables investigators to follow tissue formation from single cell sources to organised spheres in a controlled environment. Thus, the inherent fundamentals of tissue engineering are better revealed. Additionally, as the newly formed tissue is devoid of an artificial material, it resembles more closely the in vivo situation. The purpose of this review is to provide an insight into the fundamentals and the technique of micromass cell culture used to study bone tissue engineering

Association of CCR2-CCR5 Haplotypes and CCL3L1 Copy Number with Kawasaki Disease, Coronary Artery Lesions, and IVIG Responses in Japanese Children

BACKGROUND: The etiology of Kawasaki Disease (KD) is enigmatic, although an infectious cause is suspected. Polymorphisms in CC chemokine receptor 5 (CCR5) and/or its potent ligand CCL3L1 influence KD susceptibility in US, European and Korean populations. However, the influence of these variations on KD susceptibility, coronary artery lesions (CAL) and response to intravenous immunoglobulin (IVIG) in Japanese children, who have the highest incidence of KD, is unknown. METHODOLOGY/PRINCIPAL FINDINGS: We used unconditional logistic regression analyses to determine the associations of the copy number of the CCL3L1 gene-containing duplication and CCR2-CCR5 haplotypes in 133 Japanese KD cases [33 with CAL and 25 with resistance to IVIG] and 312 Japanese controls without a history of KD. We observed that the deviation from the population average of four CCL3L1 copies (i.e., <or>four copies) was associated with an increased risk of KD and IVIG resistance (adjusted odds ratio (OR)=2.25, p=0.004 and OR=6.26, p=0.089, respectively). Heterozygosity for the CCR5 HHF*2 haplotype was associated with a reduced risk of both IVIG resistance (OR=0.21, p=0.026) and CAL development (OR=0.44, p=0.071). CONCLUSIONS/SIGNIFICANCE: The CCL3L1-CCR5 axis may play an important role in KD pathogenesis. In addition to clinical and laboratory parameters, genetic markers may also predict risk of CAL and resistance to IVIG

Synchronized ATP oscillations have a critical role in prechondrogenic condensation during chondrogenesis

The skeletal elements of embryonic limb are prefigured by prechondrogenic condensation in which secreted molecules such as adhesion molecules and extracellular matrix have crucial roles. However, how the secreted molecules are controlled to organize the condensation remains unclear. In this study, we examined metabolic regulation of secretion in prechondrogenic condensation, using bioluminescent monitoring systems. We here report on ATP oscillations in the early step of chondrogenesis. The ATP oscillations depended on both glycolysis and mitochondrial respiration, and their synchronization among cells were achieved via gap junctions. In addition, the ATP oscillations were driven by Ca2+ oscillations and led to oscillatory secretion in chondrogenesis. Blockade of the ATP oscillations prevented cellular condensation. Furthermore, the degree of cellular condensation increased with the frequency of ATP oscillations. We conclude that ATP oscillations have a critical role in prechondrogenic condensation by inducing oscillatory secretion

How do parents manage irritability, challenging behavior, non-compliance and anxiety in children with Autism Spectrum Disorders? A meta-synthesis

Although there is increasing research interest in the parenting of children with ASD, at present, little is known about everyday strategies used to manage problem behaviour. We conducted a meta-synthesis to explore what strategies parents use to manage irritability, non-compliance, challenging behaviour and anxiety in their children with ASD. Approaches included: (1) accommodating the child; (2) modifying the environment; (3) providing structure, routine and occupation; (4) supervision and monitoring; (5) managing non-compliance with everyday tasks; (6) responding to problem behaviour; (7) managing distress; (8) maintaining safety and (9) analysing and planning. Results suggest complex parenting demands in children with ASD and problem behaviour. Findings will inform the development of a new measure to quantify parenting strategies relevant to ASD

Exploring the Fast Ignition Approach to Fusion Energy

Probably the most famous equation in physics is Einstein's E=mc{sup 2}, which was contained within his fifth and final paper that was published in 1905. It is this relationship between energy ( E) and mass ( m) that the fusion process exploits to generate energy. When two isotopes of hydrogen (normally Deuterium and Tritium (DT)) fuse they form helium and a neutron. In this process some of the mass of the hydrogen is converted into energy. In the fast ignition approach to fusion a large driver (such as the NIF laser) is used to compress the DT fuel to extremely high densities and then is ''sparked'' by a high intensity, short-pulse laser. The short-pulse laser energy is converted to an electron beam, which then deposits its energy in the DT fuel. The energy of the electrons in this beam is so large that the electron's mass is increased according to Einstein theory of relativity. Understanding the transport of this relativistic electron beam is critical to the success of fast ignition and is the subject of this poster