High-performance all-polymer solar cells based on fluorinated naphthalene diimide acceptor polymers with fine-tuned crystallinity and enhanced dielectric constants

© 2018 Elsevier Ltd. This manuscript version is made available under the CC-BY-NC-ND 4.0 license: http://creativecommons.org/licenses/by-nc-nd/4.0/ This author accepted manuscript is made available following 24 month embargo from date of publication (Jan 2018) in accordance with the publisher’s archiving policyGrowing interests have been devoted to the synthesis of polymer acceptors as alternatives to fullerene derivatives to realize high-performance and stable all-polymer solar cells (all-PSCs). So far, one of the key factors that limit the performance of all-PSCs is low photocurrent density (normally < 14 mA/cm2). One potential solution is to improve the dielectric constants (εr) of polymer:polymer blends, which tend to reduce the binding energy of excitons, thus boosting the exciton dissociation efficiencies. Nevertheless, the correlation between εr and photovoltaic performance has been rarely investigated for all-PSCs. In this work, five fluorinated naphthalene diimide (NDI)-based acceptor polymers, with different content of fluorine were synthesized. The incorporation of fluorine increased the εr of the acceptor polymers and blend films, which improved the charge generation and overall photocurrent of the all-PSCs. As a result, the PTB7-Th:PNDI-FT10 all-PSC attained a high power conversion efficiency (PCE) of 7.3% with a photocurrent density of 14.7 mA/cm2, which surpassed the values reported for the all-PSC based on the non-fluorinated acceptor PNDI-T10. Interestingly, similarly high photovoltaic performance was maintained regardless of a large variation of donor:acceptor ratios, which revealed the good morphological tolerance and the potential for robust production capability of all-PSCs

Marx for his times. Book Review of: 'Karl Marx : greatness and illusion' by Gareth Stedman Jones

Potential downstream targets for CD274. RNA-sequencing was performed with WT and CD274-null LICs, and the candidate genes related to proliferation and cell cycle was analyzed. (PDF 116 kb

Risk Assessment Method and Application of Urban River Ecological Governance Project Based on Cloud Model Improvement

This study classifies risk factors and establishes the risk-evaluation index system for an urban river ecological management project. That system includes construction personnel risk, construction technology risk, construction management factor risk, construction duration factor risk, and other risks. A total of 23 indicators determine the level and standard of each indicator. This study proposes a risk index system that uses the cloud model evaluation method and explains that model’s process. To demonstrate the risk evaluation methodology, it was applied to the ecological management project of Jinghe River in Jinghe New City, China. The results showed that: (1) the urban river ecological management project was subject to “a medium level of personnel risk, management risk, and construction period risk and a relatively high level of technical risk and other risks.” According to the evaluation results, the overall risk level of the project was medium, which is consistent with the risk level of the Jinghe River ecological management project at the current stage. (2) The limitation of the subjective qualitative concept caused by the traditional fuzzy comprehensive evaluation was fully considered in the improved method, and the application of the cloud-model based improved method in risk evaluation of the urban river ecological management project significantly improved the reliability and visualization of the evaluation results. Finally, the urban river ecological management project in China was adopted as an example to prove that the model boasts high stability, and some corresponding countermeasures were also proposed. The research results are expected to provide valuable references and scientific criteria for implementing urban river ecological management projects

The Ultrasonic Microsurgical Anatomical Comparative Study of the CHD Fetuses and Their Clinical Significance

The aim of our study was to increase the detection rate of fetal cardiac malformations for congenital heart disease (CHD). The ultrasonic and microanatomical methods were combined to study the CHD cases firstly, which could provide the microsurgical anatomical basis to the prenatal ultrasonic diagnosis which was used in suspected CHD and help the sonographer to improve the quality of fetal cardiac diagnosis. We established the ultrasonic standard section of the 175 complex CHD cases and collected the fetal echocardiography image files. The induced/aborted fetuses were fixed by 4% paraformaldehyde and dissected by the ultrasonic microsurgical anatomy. This research could obtain the fetal cardiac anatomic cross-sectional images which was consistent with the ultrasonic standard section and could clearly show the internal structure of the vascular malformation that optimized the ultrasound examination individually. This method could directly display the variation of the CHD fetal heart clearly and comprehensively help us to understand the complex fetal cardiac malformation from the internal structure of the vascular malformation which was consolidated by the anatomical basis of the fetal heart. This study could improve the integrity and accuracy of the prenatal cardiac ultrasound examination tremendously

Electrospinning Highly Concentrated Sodium Alginate Nanofibres without Surfactants by Adding Fluorescent Carbon Dots

In this study, sodium alginate (SA) nanofibres were obtained by electrospinning via the assistance of traditional poly(ethyl oxide) (PEO) and dimethyl sulfoxide (DMSO) with a high SA/PEO ratio of up to 94:6. However, surfactants with more or less toxicities were replaced by nontoxic and fluorescent carbon dots (CDs) to improve spinnability. Experimental details were conducted by fixing the ratio of SA/PEO to 90:10. Then, the electrospinning products of solutions with different compositions were observed with scanning electron microscopy. Properties such as conductivity, surface tension and rheology of the solutions were investigated to determine the key influencing factors. Moreover, since CDs have excellent fluorescence properties, the fluorescent properties of the nanofibre membrane that was blended with CDs were then collected. In addition, in vitro cytotoxicity assessment of the nanofibres were conducted to evaluate the toxicities and biocompatibility

Experimental Study on Carbon Fiber-Reinforced Composites Cutting with Nanosecond Laser

The carbon fiber-reinforced composite (CFRP) has the properties of a high specific strength, low density and excellent corrosion resistance; it has been widely used in aerospace and automobile lightweight manufacturing as an important material. To improve the CFRP cutting quality in the manufacturing process, a nanosecond laser with a wavelength of 532 nm was applied to cut holes with a 2-mm-thick CFRP plate by using laser rotational cutting technology. The influence of different parameters on the heat-affected zone, the cutting surface roughness and the hole taper was explored, and the cutting process parameters were optimized. With the optimized cutting parameters, the minimum value of the heat-affected zone, the cutting surface roughness and the hole taper can be obtained, which are 71.7 μm, 2.68 μm and 0.64°, respectively

A Review of Research Progress on Machining Carbon Fiber-Reinforced Composites with Lasers

Carbon fiber-reinforced composites are widely used in automobile, aerospace and military lightweight manufacturing due to their excellent mechanical properties such as light weight, excellent fracture resistance, corrosion resistance and wear resistance, etc. However, because of their high hardness, anisotropy and low interlayer strength characteristics, there are many problems with machine carbon fiber-reinforced composites with traditional methods. As a non-contact processing technology, laser machining technology has lots of advantages in carbon fiber-reinforced composites processing. However, there are also some defects produced in laser machining process such the heat affected zone, delamination and fiber extraction due to the great difference of physical properties between the carbon fibers and the resin matrix. To improve the quality of carbon fiber-reinforced composites laser machining, lots of works have been carried out. In this paper, the research progress of carbon fiber-reinforced composites laser machining parameters optimization and numerical simulation was summarized, the characteristics of laser cutting carbon fiber-reinforced composites and cutting quality influence factors were discussed, and the developing trend of the carbon fiber-reinforced composites laser cutting was prospected

Identification of tmexC3-tmexD3-toprJ1b in an XDR Providencia rettgeri clinical isolate co-producing NDM-1 and OXA-10 carbapenemases

ABSTRACT: Objectives: Emergence of carbapenemase and tigecycline resistance genes in pathogens threatens the efficacy of last-resort antibiotics. High attention should be paid to the spread and convergence of such resistance genes. This study reports an extensively drug-resistant (XDR) Providencia rettgeri clinical strain co-harbouring carbapenemase genes blaNDM-1, blaOXA-10 and the tmexCD3-toprJ1b gene cluster. Methods: The phenotype and genotype of P. rettgeri Pre20-95 were investigated by antimicrobial susceptibility testing, conjugation assay, stability testing and whole genome sequencing. Bioinformatics tools were used to uncover the genetic structures of its multidrug-resistant (MDR) plasmid pPre20-95-1 and SXT/R391 integrative and conjugative element ICEPreChn20-95. Results: P. rettgeri strain Pre20-95 was isolated from a human clinical infection and displayed an extensively drug-resistant (XDR) phenotype. Whole genome sequencing (WGS) analysis identified a pPrY2001-like MDR plasmid, namely pPre20-95-1, co-harbouring blaNDM-1 and blaOXA-10 genes in Pre20-95. The multidrug resistance region of pPre20-95-1 was composed of a Tn6625-derived module and a ∆Tn1696 structure, and blaNDM-1 and blaOXA-10 were located in a composite Tn structure consisting of insertion sequences ISCR1 and ISAba125 and an In125-like class 1 integron, respectively. Furthermore, the novel RND efflux pump gene cluster tmexCD3-toprJ1b was identified on the SXT/R391 ICE ICEPreChn20-95 of its chromosome, and reverse PCR showed that it could form a circular intermediate for transmission. Conclusion: Our findings highlight further dissemination of the tmexCD3-toprJ1b gene cluster into a clinical isolate of P. rettgeri and convergence with multiple carbapenemase genes, which increases the risk of the emergence of XDR strains and threatens the treatment of Enterobacterales bacterial infections

SPF rabbits infected with rabbit hepatitis E virus isolate experimentally showing the chronicity of hepatitis.

This study focused on investigating the pathogenesis seen in specific-pathogen-free (SPF) rabbits following infection with a homologous rabbit HEV isolate (CHN-BJ-rb14) and comparing it to that seen following infection with a heterologous swine genotype 4 HEV isolate (CHN-XJ-SW13). Three of the four animals inoculated with the homologous rabbit HEV became infected, exhibiting an intermittent viremia, obvious fluctuations of liver function biomarkers alanine aminotransferase (ALT) and aspartate aminotransferase (AST), and persistent fecal virus shedding throughout the nine month study. In addition, liver histopathology showed both chronic inflammation and some degree of fibrosis. Both positive and negative-stranded HEV RNA and HEV antigen expression were detected in liver, brain, stomach, duodenum and kidney from the necropsied rabbits. Inflammation of extrahepatic tissue (duodenum and kidney) was also observed. Three of the four rabbits inoculated with the heterologous genotype 4 swine HEV also became infected, showing similar levels of anti-HEV antibody to that generated following infection with the homologous virus isolate. The duration of both viremia and fecal shedding of virus was however shorter following infection with the heterologous virus and there was no significant elevation of liver function biomarkers. These results suggest that rabbit HEV infection may cause more severe hepatitis and prolong the course of the disease, with a possible chronic trend of hepatitis in SPF rabbits