Fabrication of core/shell ZnWO4/carbon nanorods and their Li electroactivity

Carbon-coated ZnWO4 [C-ZW] nanorods with a one-dimensional core/shell structure were synthesised using hydrothermally prepared ZnWO4 and malic acid as precursors. The effects of the carbon coating on the ZnWO4 nanorods are investigated by thermogravimetry, high-resolution transmission electron microscopy, and Raman spectroscopy. The coating layer was found to be in uniform thickness of approximately 3 nm. Moreover, the D and G bands of carbon were clearly observed at around 1,350 and 1,600 cm-1, respectively, in the Raman spectra of the C-ZW nanorods. Furthermore, lithium electroactivities of the C-ZW nanorods were evaluated using cyclic voltammetry and galvanostatic cycling. In particular, the formed C-ZW nanorods exhibited excellent electrochemical performances, with rate capabilities better than those of bare ZnWO4 nanorods at different current rates, as well as a coulombic efficiency exceeding 98%. The specific capacity of the C-ZW nanorods maintained itself at approximately 170 mAh g-1, even at a high current rate of 3 C, which is much higher than pure ZnWO4 nanorods

A randomized, phase II study of gefitinib alone versus nimotuzumab plus gefitinib after platinum-based chemotherapy in advanced non-small cell lung cancer (KCSG LU12-01)

We aimed to evaluate the efficacy of dual inhibition of epidermal growth factor receptor (EGFR) with nimotuzumab (EGFR monoclonal antibody) plus gefitinib (EGFR-tyrosine kinase inhibitor) in advanced non-small cell lung cancer (NSCLC) after platinum-based chemotherapy. An open label, randomized, phase II trial was conducted at 6 centers; 160 patients were randomized (1:1) to either gefitinib alone or nimotuzumab (200 mg, i. v. weekly) plus gefitinib (250 mg p. o. daily) until disease progression or intolerable toxicity. The primary endpoint was progression-free survival (PFS) at 3 months. Of the total 160 enrolled patients, 155 (77: gefitinib, 78: nimotuzumab plus gefitinib) received at least one dose and could be evaluated for efficacy and toxicity. The majority had adenocarcinoma (65.2%) and ECOG performance status of 0 to 1 (83.5%). The median follow-up was 22.1 months, and the PFS rate at 3 months was 48.1% in gefitinib and 37.2% in nimotuzumab plus gefitinib (P = not significant, NS). The median PFS and OS were 2.8 and 13.2 months in gefitinib and 2.0 and 14.0 months in nimotuzumab plus gefitinib. Combined treatment was not associated with superior PFS to gefitinib alone in patients with EGFR mutation (13.5 vs. 10.2 months in gefitinib alone, P=NS) or those with wild-type EGFR (0.9 vs. 2.0 months in gefitinib alone, P=NS). Combined treatment did not increase EGFR inhibition-related adverse events with manageable toxicities. The dual inhibition of EGFR with nimotuzumab plus gefitinib was not associated with better outcomes than gefitinib alone as a second-line treatment of advanced NSCLC (NCT01498562).

Tumor Margin Histology Predicts Tumor Aggressiveness in Papillary Thyroid Carcinoma: A Study of 514 Consecutive Patients

Histologic patterns at tumor margins may be related to prognosis in several malignancies. We investigated tumor aggressiveness with respect to tumor margin histology in patients with papillary thyroid carcinoma (PTC). Five hundred fourteen consecutive patients who underwent surgery for primary PTC between January and July 2009 were assigned to two groups, one with an infiltrative pattern (I-type, n = 347) at tumor margins and one with an expanding pattern (E-type, n = 167). Tumor aggressiveness was assessed by analyzing relationships between these patterns and known prognostic factors. The analysis showed that unfavorable prognostic factors such as tumor multiplicity (P = 0.002), extrathyroidal extension (P < 0.001), lateral neck lymph node metastasis (P < 0.001) and advanced TNM stage (P = 0.001) were significantly more prevalent in patients with I-type PTC than in those with the E-type. Central neck node metastases were more prevalent without statistical significance in the I-type patients (P = 0.376). Tumor margin histology was not related to gender or tumor size. These results suggest that histologic patterns at tumor margins predict aggressiveness in PTC

Synthesis of the Nickel-Cobalt-Manganese Cathode Material Using Recycled Nickel as Precursors from Secondary Batteries

As the amount of high-capacity secondary battery waste gradually increased, waste secondary batteries for industry (high-speed train & HEV) were recycled and materialization studies were carried out. The precipitation experiment was carried out with various conditions in the synthesis of LiNi0.6Co0.2Mn0.2O2 material using a Taylor reactor. The raw material used in this study was a leaching solution generated from waste nickel-based batteries. The nickel-cobalt-manganese (NCM) precursor was prepared by the Taylor reaction process. Material analysis indicated that spherical powder was formed, and the particle size of the precursor was decreased as the reaction speed was increased during the preparation of the NCM. The spherical NCM powder having a particle size of 10 μm was synthesized using reaction conditions, stirring speed of 1000 rpm for 24 hours. The NCM precursor prepared by the Taylor reaction was synthesized as a cathode material for the LIB, and then a coin-cell was manufactured to perform the capacity evaluation

Changes in aortic growth rate and factors influencing aneurysmal dilatation after uncomplicated acute type B aortic dissection

OBJECTIVES: The aim of this study was to evaluate changes in aortic growth rate and factors influencing aneurysmal dilatation after uncomplicated acute type B aortic dissection (ABAD). METHODS: Medically treated patients with uncomplicated ABAD between September 2004 and January 2020 were retrospectively reviewed. Diameters of 6 different sites in the descending aorta were measured and aortic growth rate was calculated according to the time interval. Factors associated with aneurysmal changes were also investigated. RESULTS: This study enrolled a total of 105 patients who underwent &gt;2 serial computed tomography with a mean follow-up duration of 35.4 (12.1-77.4) months. The mean overall growth rates of the proximal descending thoracic aorta (DTA), mid-DTA, distal DTA, proximal abdominal aorta, maximal DTA and maximal abdominal aorta were 0.6 (1.9), 2.9 (5.2), 2.1 (4.0), 1.2 (2.2), 3.3 (5.6) and 1.4 (2.5) mm/year, respectively. The growth rate was higher at the early stage. It decreased over time. Growth rates of proximal DTA, mid-DTA, distal DTA, proximal abdominal aorta, maximal DTA, and maximal abdominal aorta within 3 months after dissection were 1.3 (9.6), 12.6 (18.2), 7.6 (11.7), 5.9 (7.5), 16.7 (19.8) and 6.8 (8.9) mm/year, respectively. More than 2 years later, they were 0.2 (0.6), 1.6 (1.6), 1.2 (1.3), 0.9 (1.4), 1.7 (1.9) and 1.2 (1.7) mm/year, respectively. Factors associated with aneurysmal changes after uncomplicated ABAD included an elliptical true lumen (odds ratio = 3.16; 95% confidence interval: 1.19-8.41; P = 0.021) and a proximal entry &gt;10 mm (odds ratio = 3.08; 95% confidence interval: 1.09-8.69; P = 0.034) on initial computed tomography imaging. CONCLUSIONS: The aortic growth rate was higher immediately after uncomplicated ABAD but declined eventually. Patients with an elliptical true lumen and a large proximal entry might be good candidates for early endovascular intervention after uncomplicated ABAD.N

Preparation of Nickel Nanoparticles Using Nickel Raffinate Separated by Solvent Extraction from The Spent FeCl3 Etching Solution

FeCl3 bearing etching solution is mainly used for etching of metals used in shadow masks, PCBs and so on. Due course of Invar alloy etching process the FeCl3 bearing etching solution get contaminated with Ni2+ which affect adversely the etching efficiency. Hence, FeCl3 bearing etching solution discarded after several cycle of operation causes an environmental and economic problem. To address both the issues the etching solution was purified through solvent extraction and remained Ni2+ recovered by wet chemical reduction using hydrazine. For optimum Fe3+ extraction efficiency, various extraction parameter were optimized and size and morphology of the recovered pure Ni powder was analyzed. The reported process is a simple process to purify and recover Ni from industry etching solution

The clinical study on treatment of HIVD of lumbar spine using Scolopendrid Herbal Acupuncture

Objective : This study is perfonned for the purpose of examining the efficacy of the scolopendrid (Scolopendra morsitans L.) which has been used to low back pain as a folk remedy. Methods & Results : Seventy patients with H.I.V.D. treated with the scolopendrid aquacupuncture and examined 4 tests; D.I.T.L., physical test, Oswestry disability index, and self-conscious pain rate were studied. There was 50~100% of efficacy rate in each tests. Moreover, statistically valuable change in 5 to 7 D.I.T.I. points and in self-conscious pain rate was showed. Conclusion : The scolopendrid aquacupuncture is possible to be effective treating the H.I.V.D patients. So we suggest the possibility using this new remedy to the H.I.V.D. patients