Photopolymerizable monomer formulations for nanoporous proton conducting membranes

Several monomers and crosslinker in a broad range of concentrations in water and 1-Methyl-2-pyrrolidone (NMP) respectively were screened for their mechanical properties, water uptake and conductivity by photo polymerization with a polar photo initiator in porous membranes made of polypropylene and polyethersulfone respectively. As conductive polymer, primarily poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS) and poly(2-sulfoethyl methacrylate) (PSEM) respectively as well as polymers of phosphonic acid containing monomers or newly synthesized monomers were used. The conductive monomers were crosslinked with varying hydrophobic and hydrophilic multifunctional monomers like N,N'-methylene bisacrylamide (MBA), 2-Propenoic acid, 2-methyl-, 1,1'-(1,10-decanediyl) ester (D3MA) or polyethyleneglycol diacrylates with two varying chainlengths (PEG-DA700, PEG-DA330). Furthermore several new multifunctional crosslinker with enhanced thermal and ageing stability have been synthesized and tested.\ud The advantage of several different building blocks with known characteristics is the possibility to tune the polymer to special needs of an application. For example, some polymer compositions have good conductivity at lower temperatures whereas other polymers develop better properties at elevated temperatures

High performance proton conducting membranes for fuel cells made by photopolymerization of hydrolytically stable monomers

Proton conducting membranes were prepared by photopolymerization of 2- acrylamido-2-methylpropane sulfonic acid solutions within the pores of polypropylene membranes. Several commercial and novel multifunctional monomers synthesized in IAS lab were investigated as suitable crosslinking agents for this application. Some membranes made with synthesized crosslinkers at low crosslinker concentrations exceeded 2.5 times the conductivity of Nafion® 115 membrane, while exhibiting a good hydrolytical stability, in contrast to the commercial crosslinkers based on multifunctional (meth)acrylates

Multifunctionalized Self-supported (Nano) Membranes as Integrated Platform for Plasmonic Metamaterials

We considered the possibility to fabricate multifunctional nanocomposite membranes as a platform for plasmonic metamaterials, simultaneously incorporating pores, built-in functional groups and active nanoparticles. To this purpose we combined lamination and inclusion of nanofillers into the membrane host. For the basic material we chose macroporous crosslinked copolymers based on glycidyl methacrylate (GMA). The epoxy group present in GMA molecule is readily transformed into various functional groups that further serve as affinity enhancers, ensuring the usability of the membranes as pre-concentrators of selected agents in plasmonic sensors. To form GMA-based membranes we used a recently proposed method combining the traditional immersion precipitation with photopolymerization and crosslinking of functional monomers. Further functionalization is obtained by in-situ formation of noble metal nanoparticles directly within the GMA host. In this way membranes with simultaneous plasmonic, adsorbent and catalytic functionality are obtained. We considered the use of the our structures for plasmonic chemical sensors where separator, pre-concentrator and binding agent are integrated with the plasmonic crystal, as well as for plasmonic enhancement of photocatalytic reactions in microreactors. Our approach gives a highly tailorable element compatible with microelectromechanical systems (MEMS) technologies and readily transferable across platforms

Asymmetric sol-gel proton-conducting membrane

Proton-conducting membranes with interpenetrating polymer network morphology have gained attention in recent years for potential replacement of standard Nafion membranes in direct methanol fuel cells. These membranes generally consist of fine interpenetrating domains of proton-conducting and mechanically-supporting polymer phases, which often leads to improvements in mechanical strength and methanol barrier properties. Asymmetric sol-gel membranes comprising proton-conducting channels of cross-linked sulfonic acid functionalized ionomers embedded within a matrix of thermally-resistant, glassy polymer were prepared by photopolymerization starting from a polymer solution and evaluated in our laboratories. These membranes have an integral top skin layer with fine biomimetic proton-conducting channels, which provides a barrier against methanol crossover, on top of a coarser proton-conducting support. Conductivity of asymmetric membranes over a range of initial polymer concentrations and ion-exchange capacities (IEC) was just slightly lower than for the corresponding symmetric membranes. Methanol barrier properties of asymmetric sol-gel membranes were better than that of Nafion 115 membrane. The crosslinking agent functionality had a major effect on membrane conductivity. Use of trifunctional crosslinking agents resulted in significantly higher conductivities than those obtained with bifunctional agents, even surpassing the conductivity of Nafion membranes

Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells

Polymer electrolyte fuel cells (PEFC) gained a lot of interest in recent years as a potential solution for an eco-friendly energy. Proton exchange membranes (PEM) are one of the main components of PEFCs and require mechanical and chemical stability to ensure high proton conductivity and effective separation of anode and cathode under challenging conditions. Best commercial membranes made from sulfonated fluoropolymers, such as Nafion®, are rather expensive. To improve fuel cell performance at a lower cost, 2-acrylamido-2-methylpropane sulfonic acid (AMPS) was investigated recently. 1 Since polyAMPS (PAMPS) excessively swells or even dissolves in water, we investigated several commercial crosslinkers and new multifunctional monomers (Fig. 1) to decrease swelling by crosslinking. AMPS, crosslinker and photoinitiator were dissolved in water and N-methyl-2-pyrrolidone (NMP), respectively. To facilitate conductivity measurements and handling of crosslinked PAMPS formulations after UVinitiated radical polymerization, they were constrained within a porous membrane using a procedure described by Zhou et al. 2 We tested several commercial crosslinkers and according to these results we developed new crosslinkers with enhanced hydrolytical stability and conductivity. In contrast to the commercial crosslinkers, where conductivity increased with increasing amount of crosslinker, our new acrylamide based crosslinkers needed only very low concentrations. They could achieve more than 2.5 times the conductivity of Nafion with only 5 wt% crosslinker. We used this novel crosslinkers to integrate them into asymmetric membranes with interpenetrating proton-conducting morphology for enhanced methanol barrier properties. 3 First results of their performance compared to Nafion will be presented. The research leading to these results has received funding from the European Community's FP7- NMP Programme, under the Project Acronym MultiPlat with Grant Agreement: N 228943 and the Austrian Federal Ministry of Science and Research. The authors would like to thank 3M for PP membrane samples and Ciba SC, Huntsman, Ivoclar Vivadent and Sartomer for samples of photoinitiator and crosslinker. 1 a) Qiao, J., et al., Journal of Materials Chemistry 2005, 15 (41), 4414-4423. b)Diao, H., et al., Macromolecules 43 (15), 6398-6405. 3 Zhou, J., et al., Journal of Membrane Science 2005, 254 (1-2), 89-99. 4 Radovanovic, P., et al., Journal of Membrane Science 2012, 401-402, 254-261

Novel asymmetric interpenetrating proton-conducting membrane

Fuel cells comprising proton-conducting polymer membranes are focus of active research due to their versatile applications as energy sources in the automotive, stationary and portable fields. A fluoro-ionomer membrane, such as Nafion available from Du Pont de Nemours, is commonly used for these applications. High price of these membranes and their limitations, such as high crossover of methanol in Direct Methanol Fuel Cells and performance loss under conditions of low relative humidity, have led to investigations of other proton-conducting membranes from less expensive, nonfluorinated materials. Proton-conducting membranes with interpenetrating polymer network morphology have been a subject of growing interest in recent years [1]. These materials are generally prepared by either in situ polymerization and cross-linking starting from initial reactants, or by sequential synthesis starting from a polymer network swollen with necessary precursors that subsequently react to form the interpenetrating structure within the first network. An interplay of the chemical reaction and liquid-liquid demixing kinetics has a determining effect on the final membrane morphology. Interpenetrating domains of relatively small size are typical, as opposed to macroscopic phase separation observed in most polymer blends. Such fine morphology of interpenetrating proton-conducting membranes often leads to improvement in mechanical strength and reactant barrier properties. Novel asymmetric membranes comprising proton-conducting channels of cross-linked sulfonic acid functionalized ionomers embedded within a matrix of thermally resistant, glassy polymer were prepared and evaluated in our laboratories. These membranes have an integral top skin layer with fine biomimetic proton-conducting channels, which provides a barrier against methanol crossover, on top of a coarser proton-conducting support. Conductivity of asymmetric membranes over a range of initial polymer concentrations and ion-exchange capacities (IEC) was just slightly lower than for the corresponding symmetric membranes. These conductivity measurements were carried out using a 4-point in-plane method. It is expected that the planned measurements in the direction of membrane thickness will result in significantly higher conductivities due to the anisotropic membrane morphology

Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells

Polymer electrolyte fuel cells (PEFC) gained a lot of interest in recent years as a potential solution for an eco-friendly energy. Proton exchange membranes (PEM) are one of the main components of PEFCs and require mechanical and chemical stability to ensure high proton conductivity and effective separation of anode and cathode under challenging conditions. Best commercial membranes made from sulfonated fluoropolymers, such as Nafion®, are rather expensive. To improve fuel cell performance at a lower cost, 2-acrylamido-2-methylpropane sulfonic acid (AMPS) was investigated recently. 1 Since polyAMPS (PAMPS) excessively swells or even dissolves in water, we investigated several commercial crosslinkers and new multifunctional monomers (Fig. 1) to decrease swelling by crosslinking. AMPS, crosslinker and photoinitiator were dissolved in water and N-methyl-2-pyrrolidone (NMP), respectively. To facilitate conductivity measurements and handling of crosslinked PAMPS formulations after UVinitiated radical polymerization, they were constrained within a porous membrane using a procedure described by Zhou et al. 2 We tested several commercial crosslinkers and according to these results we developed new crosslinkers with enhanced hydrolytical stability and conductivity. In contrast to the commercial crosslinkers, where conductivity increased with increasing amount of crosslinker, our new acrylamide based crosslinkers needed only very low concentrations. They could achieve more than 2.5 times the conductivity of Nafion with only 5 wt% crosslinker. We used this novel crosslinkers to integrate them into asymmetric membranes with interpenetrating proton-conducting morphology for enhanced methanol barrier properties. 3 First results of their performance compared to Nafion will be presented. The research leading to these results has received funding from the European Community's FP7- NMP Programme, under the Project Acronym MultiPlat with Grant Agreement: N 228943 and the Austrian Federal Ministry of Science and Research. The authors would like to thank 3M for PP membrane samples and Ciba SC, Huntsman, Ivoclar Vivadent and Sartomer for samples of photoinitiator and crosslinker. 1 a) Qiao, J., et al., Journal of Materials Chemistry 2005, 15 (41), 4414-4423. b)Diao, H., et al., Macromolecules 43 (15), 6398-6405. 3 Zhou, J., et al., Journal of Membrane Science 2005, 254 (1-2), 89-99. 4 Radovanovic, P., et al., Journal of Membrane Science 2012, 401-402, 254-261

Asymmetric proton-conducting membrane made by photopolymerization

Proton-conducting membranes with interpenetrating polymer network morphology have been frequently considered in recent years for potential replacement of standard Nafion membranes in direct methanol fuel cells. Asymmetric membranes comprising protonconducting channels of cross-linked sulfonic acid functionalized ionomers embedded within a matrix of thermally-resistant, glassy polymer were prepared by photopolymerization starting from a polymer solution and evaluated in our laboratories. These membranes have an integral top skin layer with fine proton-conducting channels, which serves as a barrier against methanol crossover, on top of a coarser proton-conducting support. Conductivity of asymmetric membranes over a range of initial polymer concentrations and ion-exchange capacities (IEC) was just slightly lower than for the corresponding symmetric membranes. Methanol barrier properties of asymmetric proton-conducting membranes were better than that of the state-of-the art Nafion 115 membrane. The crosslinking agent functionality had a major effect on membrane conductivity. Use of trifunctional crosslinking agents resulted in significantly higher conductivities than those obtained with bifunctional agents, even surpassing the conductivity of Nafion membranes

Proton conducting fluorinated polymer nanomembrane for fuel cell applications

Polymer electrolyte fuel cells (PEFC) gained a lot of interest in recent years as a potential solution for an eco-friendly energy. Proton exchage membranes (PEM) are one of the main components of PEFC and require mechanical and chemical stability to ensure high proton conductivity and effective separation of anode and cathode under challenging conditions. Best commercial membranes made from sulfonated fluoropolymers, such as Nafion, are rather expensive. To improve fuel cell performance at a lower cost, 2-acrylamido-2-methylpropane sulfonic acid (AMPS) was investigated recently. We investigated crosslinkable polymers consisting of AMPS for proton conductivity, a perfluorinated acrylate to mimic Nafion and glycidyl methacrylate for crosslinking. Since we combine very polar and very apolar monomers in the polymer chain we investigated phase separation and orientation of proton conducting channels in the electric field. First results of conductivity measurements and orientation will be presented

Photopolymerization of crosslinked proton conducting membranes

Several monomers and crosslinker in a broad range of concentrations in water and 1-Methyl-2-pyrrolidone (NMP) respectively were screened for their mechanical properties, water uptake and conductivity in porous membranes by photo polymerization with a polar photo initiator. As conductive polymer, primarily poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS) and poly(2-sulfoethyl methacrylate) (PSEM) respectively as well as polymers of phosphonic acid containing monomers or newly synthesized monomers were used. The conductive monomers were crosslinked with varying hydrophobic and hydrophilic multifunctional monomers like N,N'-methylene bisacrylamide (MBA), 2-Propenoic acid, 2-methyl-, 1,1'-(1,10-decanediyl) ester (D3MA) or polyethyleneglycol diacrylates with two varying chainlengths (PEG-DA700, PEG-DA330). The advantage of several different building blocks with known characteristics is the possibility to tune the polymer to special needs of an application. For example, some polymer compositions have good conductivity at lower temperatures whereas other polymers develop better properties at elevated temperatures. The research leading to these results has received funding from the European Community's FP7- NMP Programme, under the Project Acronym MultiPlat and with Grant Agreement: N 228943 and the Austrian Federal Ministry of Science and Research. We thank 3M for providing us with samples of the PP membrane. 1/ Hamrock, S.J. and M.A. Yandrasits, Proton Exchange Membranes for Fuel Cell Applications. 2006. 46(3): p. 219 - 244. 2/ Hoogers, G., Membranes and Ionomers, in Fuel Cell Technology Handbook G. Hoogers, Editor. 2002, CRC Press. p. 36