Measuring Transit Signal Recovery in the Kepler Pipeline. III. Completeness of the Q1-Q17 DR24 Planet Candidate Catalogue, with Important Caveats for Occurrence Rate Calculations

With each new version of the Kepler pipeline and resulting planet candidate catalogue, an updated measurement of the underlying planet population can only be recovered with an corresponding measurement of the Kepler pipeline detection efficiency. Here, we present measurements of the sensitivity of the pipeline (version 9.2) used to generate the Q1-Q17 DR24 planet candidate catalog (Coughlin et al. 2016). We measure this by injecting simulated transiting planets into the pixel-level data of 159,013 targets across the entire Kepler focal plane, and examining the recovery rate. Unlike previous versions of the Kepler pipeline, we find a strong period dependence in the measured detection efficiency, with longer (>40 day) periods having a significantly lower detectability than shorter periods, introduced in part by an incorrectly implemented veto. Consequently, the sensitivity of the 9.2 pipeline cannot be cast as a simple one-dimensional function of the signal strength of the candidate planet signal as was possible for previous versions of the pipeline. We report on the implications for occurrence rate calculations based on the Q1-Q17 DR24 planet candidate catalog and offer important caveats and recommendations for performing such calculations. As before, we make available the entire table of injected planet parameters and whether they were recovered by the pipeline, enabling readers to derive the pipeline detection sensitivity in the planet and/or stellar parameter space of their choice.Comment: 8 pages, 5 figures, full electronic version of Table 1 available at the NASA Exoplanet Archive; accepted by ApJ May 2nd, 201

Terrestrial Planet Occurrence Rates for the Kepler GK Dwarf Sample

We measure planet occurrence rates using the planet candidates discovered by the Q1-Q16 Kepler pipeline search. This study examines planet occurrence rates for the Kepler GK dwarf target sample for planet radii, 0.75<Rp<2.5 Rearth, and orbital periods, 50<Porb<300 days, with an emphasis on a thorough exploration and identification of the most important sources of systematic uncertainties. Integrating over this parameter space, we measure an occurrence rate of F=0.77 planets per star, with an allowed range of 0.3<F<1.9. The allowed range takes into account both statistical and systematic uncertainties, and values of F beyond the allowed range are significantly in disagreement with our analysis. We generally find higher planet occurrence rates and a steeper increase in planet occurrence rates towards small planets than previous studies of the Kepler GK dwarf sample. Through extrapolation, we find that the one year orbital period terrestrial planet occurrence rate, zeta_1=0.1, with an allowed range of 0.01<zeta_1<2, where zeta_1 is defined as the number of planets per star within 20% of the Rp and Porb of Earth. For G dwarf hosts, the zeta_1 parameter space is a subset of the larger eta_earth parameter space, thus zeta_1 places a lower limit on eta_earth for G dwarf hosts. From our analysis, we identify the leading sources of systematics impacting Kepler occurrence rate determinations as: reliability of the planet candidate sample, planet radii, pipeline completeness, and stellar parameters.Comment: 19 Pages, 17 Figures, Submitted ApJ. Python source to support Kepler pipeline completeness estimates available at http://github.com/christopherburke/KeplerPORTs

Planetary Candidates Observed by Kepler. VIII. A Fully Automated Catalog with Measured Completeness and Reliability Based on Data Release 25

We present the Kepler Object of Interest (KOI) catalog of transiting exoplanets based on searching 4 yr of Kepler time series photometry (Data Release 25, Q1–Q17). The catalog contains 8054 KOIs, of which 4034 are planet candidates with periods between 0.25 and 632 days. Of these candidates, 219 are new, including two in multiplanet systems (KOI-82.06 and KOI-2926.05) and 10 high-reliability, terrestrial-size, habitable zone candidates. This catalog was created using a tool called the Robovetter, which automatically vets the DR25 threshold crossing events (TCEs). The Robovetter also vetted simulated data sets and measured how well it was able to separate TCEs caused by noise from those caused by low signal-to-noise transits. We discuss the Robovetter and the metrics it uses to sort TCEs. For orbital periods less than 100 days the Robovetter completeness (the fraction of simulated transits that are determined to be planet candidates) across all observed stars is greater than 85%. For the same period range, the catalog reliability (the fraction of candidates that are not due to instrumental or stellar noise) is greater than 98%. However, for low signal-to-noise candidates between 200 and 500 days around FGK-dwarf stars, the Robovetter is 76.7% complete and the catalog is 50.5% reliable. The KOI catalog, the transit fits, and all of the simulated data used to characterize this catalog are available at the NASA Exoplanet Archive

Another Shipment of Six Short-Period Giant Planets from TESS

We present the discovery and characterization of six short-period, transiting giant planets from NASA\u27s Transiting Exoplanet Survey Satellite (TESS) -- TOI-1811 (TIC 376524552), TOI-2025 (TIC 394050135), TOI-2145 (TIC 88992642), TOI-2152 (TIC 395393265), TOI-2154 (TIC 428787891), & TOI-2497 (TIC 97568467). All six planets orbit bright host stars (8.

Measuring Transit Signal Recovery in the Kepler Pipeline. IV. Completeness of the DR25 Planet Candidate Catalog

In this work we empirically measure the detection efficiency of the Kepler pipeline used to create the final Kepler threshold crossing event and planet candidate catalogs, a necessary ingredient for occurrence-rate calculations using these lists. By injecting simulated signals into the calibrated pixel data and processing those pixels through the pipeline as normal, we quantify the detection probability of signals as a function of their signal strength and orbital period. In addition, we investigate the dependence of the detection efficiency on parameters of the target stars and their location in the Kepler field of view. We find that the end-of-mission version of the Kepler pipeline returns to a high overall detection efficiency, averaging a 90%–95% rate of detection for strong signals across a wide swathe variety of parameter space. We find a weak dependence of the detection efficiency on the number of transits contributing to the signal and the orbital period of the signal, and a stronger dependence on the stellar effective temperature and correlated noise properties. We also find a weak dependence of the detection efficiency on the position within the field of view. By restricting the Kepler stellar sample to stars with well-behaved correlated noise properties, we can define a set of stars with high detection efficiency for future occurrence-rate calculations

Measuring Transit Signal Recovery in the Kepler Pipeline. IV. Completeness of the DR25 Planet Candidate Catalog

In this work we empirically measure the detection efficiency of the Kepler pipeline used to create the final Kepler threshold crossing event and planet candidate catalogs, a necessary ingredient for occurrence-rate calculations using these lists. By injecting simulated signals into the calibrated pixel data and processing those pixels through the pipeline as normal, we quantify the detection probability of signals as a function of their signal strength and orbital period. In addition, we investigate the dependence of the detection efficiency on parameters of the target stars and their location in the Kepler field of view. We find that the end-of-mission version of the Kepler pipeline returns to a high overall detection efficiency, averaging a 90%–95% rate of detection for strong signals across a wide swathe variety of parameter space. We find a weak dependence of the detection efficiency on the number of transits contributing to the signal and the orbital period of the signal, and a stronger dependence on the stellar effective temperature and correlated noise properties. We also find a weak dependence of the detection efficiency on the position within the field of view. By restricting the Kepler stellar sample to stars with well-behaved correlated noise properties, we can define a set of stars with high detection efficiency for future occurrence-rate calculations

Discovery and Validation of Kepler-452b: A 1.6-Re Super Earth Exoplanet in the Habitable Zone of a G2 Star

We report on the discovery and validation of Kepler-452b, a transiting planet identified by a search through the 4 years of data collected by NASA's Kepler Mission. This possibly rocky 1.63$^{+0.23}_{-0.20}$ R$_\oplus$ planet orbits its G2 host star every 384.843$^{+0.007}_{0.012}$ days, the longest orbital period for a small (R$_p$ < 2 R$_\oplus$) transiting exoplanet to date. The likelihood that this planet has a rocky composition lies between 49% and 62%. The star has an effective temperature of 5757$\pm$85 K and a log g of 4.32$\pm$0.09. At a mean orbital separation of 1.046$^{+0.019}_{-0.015}$ AU, this small planet is well within the optimistic habitable zone of its star (recent Venus/early Mars), experiencing only 10% more flux than Earth receives from the Sun today, and slightly outside the conservative habitable zone (runaway greenhouse/maximum greenhouse). The star is slightly larger and older than the Sun, with a present radius of 1.11$^{+0.15}_{-0.09}$ R$_\odot$ and an estimated age of 6 Gyr. Thus, Kepler-452b has likely always been in the habitable zone and should remain there for another 3 Gyr.Comment: 19 pages, 16 figure

Sensitivity Analyses of Exoplanet Occurrence Rates from Kepler and Gaia

We infer the number of planets per star as a function of orbital period and planet size using Kepler archival data products with updated stellar properties from the Gaia Data Release 2. Using hierarchical Bayesian modeling and Hamiltonian Monte Carlo, we incorporate planet radius uncertainties into an inhomogeneous Poisson point process model. We demonstrate that this model captures the general features of the outcome of the planet formation and evolution around GK stars and provides an infrastructure to use the Kepler results to constrain analytic planet distribution models. We report an increased mean and variance in the marginal posterior distributions for the number of planets per GK star when including planet radius measurement uncertainties. We estimate the number of planets per GK star between 0.75 and 2.5 R⊕ and with orbital periods of 50–300 days to have a 68% credible interval of 0.49–0.77 and a posterior mean of 0.63. This posterior has a smaller mean and a larger variance than the occurrence rate calculated in this work and in Burke et al. for the same parameter space using the Q1−Q16 (previous Kepler planet candidate and stellar catalog). We attribute the smaller mean to many of the instrumental false positives at longer orbital periods being removed from the DR25 catalog. We find that the accuracy and precision of our hierarchical Bayesian model posterior distributions are less sensitive to the total number of planets in the sample, and more so for the characteristics of the catalog completeness and reliability and the span of the planet parameter space