11,735 research outputs found
Jamming transition in a highly dense granular system under vertical vibration
The dynamics of the jamming transition in a three-dimensional granular system
under vertical vibration is studied using diffusing-wave spectroscopy. When the
maximum acceleration of the external vibration is large, the granular system
behaves like a fluid, with the dynamic correlation function G(t) relaxing
rapidly. As the acceleration of vibration approaches the gravitational
acceleration g, the relaxation of G(t) slows down dramatically, and eventually
stops. Thus the system undergoes a phase transition and behaves like a solid.
Near the transition point, we find that the structural relaxation shows a
stretched exponential behavior. This behavior is analogous to the behavior of
supercooled liquids close to the glass transition.Comment: 5 pages, 5 figures, accepted by Phys. Rev.
SBE-type metal-substituted aluminophosphates: detemplation and coordination chemistry
The detemplation process in Me-SBE (Me = Co^2+, Mg^2+, and Mn^2+) aluminophosphates was studied to elucidate materials stability and framework characteristics. In addition, the hydrothermal synthesis conditions were optimized to obtain materials with minimal phase impurities. This was accomplished by means of decreasing reaction temperature and increasing aging periods. Scanning electron microscopy analysis of the Mg- and Mn-SBE as-synthesized samples revealed square plates with truncated corner morphologies grown in aggregated fashion and contrasting with the previously reported hexagonal platelike morphology of Co-SBE. Cautious detemplation in vacuum, using an evacuation rate of 10 mmHg/s and a temperature of 648 K, resulted in surface areas of about 700, 500, and 130 m^2/g for Mg-, Co-, and Mn-SBE, respectively. Thermal gravimetric analysis and in situ high-temperature powder X-ray diffraction analyses indicate the frameworks for all of the SBE variants experienced collapse upon treatment with helium at temperatures above 700 K and subsequently formed an aluminophosphate trydimite dense phase. Detemplation in air at all times resulted in framework destruction during detemplation. In situ differential scanning calorimetry−powder X-ray diffraction data showed that the SBE frameworks experience breathing modes related to specific endothermic and exothermic scenarios during air treatment. Decomposition and elimination of the organic template during vacuum treatment was verified by Fourier transform infrared spectroscopy. X-ray photoelectron spectroscopy revealed that most of the Co atoms in vacuum-treated samples are in tetrahedral coordination, while the Mn atoms exhibit various coordination states. Ultraviolet-visible, electron paramagnetic resonance, and magic-angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy corroborated the latter result in addition to providing evidence for the formation of Mn extra framework species. ^(27)Al MAS NMR spectra for vacuum-detemplated Mg-SBE samples prior to and after dehydration confirmed the reversible formation of aluminum octahedral sites. This, however, did not affect the porous nature of detemplated Mg-SBE samples as these are capable of adsorbing 19 water molecules per super cage at 298 K
Patterns of Striped order in the Classical Lattice Coulomb Gas
We obtain via Monte Carlo simulations the low temperature charge
configurations in the lattice Coulomb gas on square lattices for charge filling
ratio in the range . We find a simple regularity in the low
temperature charge configurations which consist of a suitable periodic
combination of a few basic striped patterns characterized by the existence of
partially filled diagonal channels. In general there exist two separate
transitions where the lower temperature transition () corresponds to the
freezing of charges within the partially filled channels. is found to be
sensitively dependent on through the charge number density within the channels.Comment: 4 pages, 8 figure
Thermal Testing and Model Correlation of the Magnetospheric Multiscale (MMS) Observatories
International Conference on Envronmental Systems (ICES), Seattle WA NCTS 20964-15. The Magnetospheric Multiscale (MMS) mission is a Solar Terrestrial Probes mission comprising four identically instrumented spacecraft that will use Earths magnetosphere as a laboratory tostudy the microphysics of three fundamental plasma processes: magnetic reconnection, energetic particle acceleration, and turbulence. This paper presents the complete thermal balance (TB) test performed on the first of four observatories to go through thermal vacuum (TV) and the minibalance testing that was performed on the subsequent observatories to provide a comparison of all four. The TV and TB tests were conducted in a thermal vacuum chamber at the Naval Research Laboratory (NRL) in Washington, D.C. with the vacuum level higher than 1.3 x 10-4 Pa (10-6 torr)and the surrounding temperature achieving -180 C. Three TB test cases were performed that included hot operational science, cold operational science and a cold survival case. In addition to the three balance cases a two hour eclipse and a four hour eclipse simulation was performed during the TV test to provide additional transient data points that represent the orbit in eclipse (or Earth's shadow) The goal was to perform testing such that the flight orbital environments could be simulated as closely as possible. A thermal model correlation between the thermal analysis and the test results was completed. Over 400 1-Wire temperature sensors, 200 thermocouples and 125 flight thermistor temperature sensors recorded data during TV and TB testing. These temperatureversus time profiles and their agreements with the analytical results obtained using Thermal Desktop and SINDAFLUINT are discussed. The model correlation for the thermal mathematical model (TMM) is conducted based on the numerical analysis results and the test data. The philosophy of model correlation was to correlate the model to within 3 C of the test data using the standard deviation and mean deviation error calculation. Individual temperature error goal is to be within 5 C and the heater power goal is to be within 5 of test data. The results of the model correlation are discussed and the effect of some material and interface parameters on the temperature profiles are presented
Thermal Testing and Model Correlation of the Magnetospheric Multiscale (MMS) Observatories
The Magnetospheric Multiscale (MMS) mission is a Solar Terrestrial Probes mission comprising four identically instrumented spacecraft that will use Earth's magnetosphere as a laboratory to study the microphysics of three fundamental plasma processes: magnetic reconnection, energetic particle acceleration, and turbulence. This paper presents the complete thermal balance (TB) test performed on the first of four observatories to go through thermal vacuum (TV) and the minibalance testing that was performed on the subsequent observatories to provide a comparison of all four. The TV and TB tests were conducted in a thermal vacuum chamber at the Naval Research Laboratory (NRL) in Washington, D.C. with the vacuum level higher than 1.3 x 10 (sup -4) pascals (10 (sup -6) torr) and the surrounding temperature achieving -180 degrees Centigrade. Three TB test cases were performed that included hot operational science, cold operational science and a cold survival case. In addition to the three balance cases a two hour eclipse and a four hour eclipse simulation was performed during the TV test to provide additional transient data points that represent the orbit in eclipse (or Earth's shadow) The goal was to perform testing such that the flight orbital environments could be simulated as closely as possible. A thermal model correlation between the thermal analysis and the test results was completed. Over 400 1-Wire temperature sensors, 200 thermocouples and 125 flight thermistor temperature sensors recorded data during TV and TB testing. These temperature versus time profiles and their agreements with the analytical results obtained using Thermal Desktop and SINDA/FLUINT are discussed. The model correlation for the thermal mathematical model (TMM) is conducted based on the numerical analysis results and the test data. The philosophy of model correlation was to correlate the model to within 3 degrees Centigrade of the test data using the standard deviation and mean deviation error calculation. Individual temperature error goal is to be within 5 degrees Centigrade and the heater power goal is to be within 5 percent of test data. The results of the model correlation are discussed and the effect of some material and interface parameters on the temperature profiles are presented
- …