22,198 research outputs found
Space Shuttle flying qualities and flight control system assessment study, phase 2
A program of flying qualities experiments as part of the Orbiter Experiments Program (OEX) is defined. Phase 1, published as CR-170391, reviewed flying qualities criteria and shuttle data. The review of applicable experimental and shuttle data to further define the OEX plan is continued. An unconventional feature of this approach is the use of pilot strategy model identification to relate flight and simulator results. Instrumentation, software, and data analysis techniques for pilot model measurements are examined. The relationship between shuttle characteristics and superaugmented aircraft is established. STS flights 1 through 4 are reviewed from the point of view of flying qualities. A preliminary plan for a coordinated program of inflight and simulator research is presented
Space Shuttle flying qualities and flight control system assessment study
The suitability of existing and proposed flying quality and flight control system criteria for application to the space shuttle orbiter during atmospheric flight phases was assessed. An orbiter experiment for flying qualities and flight control system design criteria is discussed. Orbiter longitudinal and lateral-directional flying characteristics, flight control system lag and time delay considerations, and flight control manipulator characteristics are included. Data obtained from conventional aircraft may be inappropriate for application to the shuttle orbiter
Space Shuttle flying qualities criteria assessment. Phase 5: Data acquistion and analysis
The development of flying qualities experiments (OFQ) as a part of the Orbiter Experiments Program (OEX) was continued. The data base was extended to use the ground based cinetheodolite measurements of orbiter approach and landing. Onboard the cinetheodolite data were analyzed from flights STS 2 through 7 to identify the effective augmented vehicle dynamics, the control strategy employed by the pilot during preflare, shallow glide, and final flare segments of the landing, and the key approach and touchdown performance measures. A plan for an OFQ flying qualities data archive and processing is presented
Flight control systems properties and problems, volume 1
This volume contains a delineation of fundamental and mechanization-specific flight control characteristics and problems gleaned from many sources and spanning a period of over two decades. It is organized to present and discuss first some fundamental, generic problems of closed-loop flight control systems involving numerator characteristics (quadratic dipoles, non-minimum phase roots, and intentionally introduced zeros). Next the principal elements of the largely mechanical primary flight control system are reviewed with particular emphasis on the influence of nonlinearities. The characteristics and problems of augmentation (damping, stability, and feel) system mechanizations are then dealt with. The particular idiosyncracies of automatic control actuation and command augmentation schemes are stressed, because they constitute the major interfaces with the primary flight control system and an often highly variable vehicle response
Investigation of interactions between limb-manipulator dynamics and effective vehicle roll control characteristics
A fixed-base simulation was performed to identify and quantify interactions between the pilot's hand/arm neuromuscular subsystem and such features of typical modern fighter aircraft roll rate command control system mechanization as: (1) force sensing side-stick type manipulator; (2) vehicle effective role time constant; and (3) flight control system effective time delay. The simulation results provide insight to high frequency pilot induced oscillations (PIO) (roll ratchet), low frequency PIO, and roll-to-right control and handling problems previously observed in experimental and production fly-by-wire control systems. The simulation configurations encompass and/or duplicate actual flight situations, reproduce control problems observed in flight, and validate the concept that the high frequency nuisance mode known as roll ratchet derives primarily from the pilot's neuromuscular subsystem. The simulations show that force-sensing side-stick manipulator force/displacement/command gradients, command prefilters, and flight control system time delays need to be carefully adjusted to minimize neuromuscular mode amplitude peaking (roll ratchet tendency) without restricting roll control bandwidth (with resulting sluggish or PIO prone control)
Space shuttle flying qualities and criteria assessment
Work accomplished under a series of study tasks for the Flying Qualities and Flight Control Systems Design Criteria Experiment (OFQ) of the Shuttle Orbiter Experiments Program (OEX) is summarized. The tasks involved review of applicability of existing flying quality and flight control system specification and criteria for the Shuttle; identification of potentially crucial flying quality deficiencies; dynamic modeling of the Shuttle Orbiter pilot/vehicle system in the terminal flight phases; devising a nonintrusive experimental program for extraction and identification of vehicle dynamics, pilot control strategy, and approach and landing performance metrics, and preparation of an OEX approach to produce a data archive and optimize use of the data to develop flying qualities for future space shuttle craft in general. Analytic modeling of the Orbiter's unconventional closed-loop dynamics in landing, modeling pilot control strategies, verification of vehicle dynamics and pilot control strategy from flight data, review of various existent or proposed aircraft flying quality parameters and criteria in comparison with the unique dynamic characteristics and control aspects of the Shuttle in landing; and finally a summary of conclusions and recommendations for developing flying quality criteria and design guides for future Shuttle craft
The 2000 Periastron Passage of PSR B1259-63
We report here on a sequence of 28 observations of the binary pulsar system
PSR B1259-63/SS2883 at four radio frequencies made with the Australia Telescope
Compact Array around the time of the 2000 periastron passage. Observations made
on 2000 Sep 1 show that the pulsar's apparent rotation measure (RM) reached a
maximum of rad m, some 700 times the value measured
away from periastron, and is the largest astrophysical RM measured. This value,
combined with the dispersion measure implies a magnetic field in the Be star's
wind of 6 mG. We find that the light curve of the unpulsed emission is similar
to that obtained during the 1997 periastron but that differences in detail
imply that the emission disc of the Be star is thicker and/or of higher
density. The behaviour of the light curve at late times is best modelled by the
adiabatic expansion of a synchrotron bubble formed in the pulsar/disc
interaction. The expansion rate of the bubble km s is
surprisingly low but the derived magnetic field of 1.6 G close to that
expected.Comment: 8 pages, 6 figures, 3 tables, LaTeX (mn.sty). Accepted for
publication in the Monthly Notices of the Royal Astronomical Society. Also
available at http://astronomy.swin.edu.au/staff/tconnors/publications.htm
Thermodynamic Geometry of the Born-Infeld-anti-de Sitter black holes
Thermodynamic geometry is applied to the Born-Infeld-anti-de Sitter black
hole (BIAdS) in the four dimensions, which is a nonlinear generalization of the
Reissner-Norstr\"Aom-AdS black hole (RNAdS). We compute the Weinhold as well as
the Ruppeiner scalar curvature and find that the singular points are not the
same with the ones obtained using the heat capacity. Legendre-invariant metric
proposed by Quevedo and the metric obtained by using the free energy as the
thermodynamic potential are obtained and the corresponding scalar curvatures
diverge at the Davies points.Comment: Latex,19 pages,14 figure
Matter in Toy Dynamical Geometries
One of the objectives of theories describing quantum dynamical geometry is to
compute expectation values of geometrical observables. The results of such
computations can be affected by whether or not matter is taken into account. It
is thus important to understand to what extent and to what effect matter can
affect dynamical geometries. Using a simple model, it is shown that matter can
effectively mold a geometry into an isotropic configuration. Implications for
"atomistic" models of quantum geometry are briefly discussed.Comment: 8 pages, 1 figure, paper presented at DICE 200
Synthesis, Structure, and Ferromagnetism of a New Oxygen Defect Pyrochlore System Lu2V2O_{7-x} (x = 0.40-0.65)
A new fcc oxygen defect pyrochlore structure system Lu2V2O_{7-x} with x =
0.40 to 0.65 was synthesized from the known fcc ferromagnetic semiconductor
pyrochlore compound Lu2V2O7 which can be written as Lu2V2O6O' with two
inequivalent oxygen sites O and O'. Rietveld x-ray diffraction refinements
showed significant Lu-V antisite disorder for x >= 0.5. The lattice parameter
versus x (including x = 0) shows a distinct maximum at x ~ 0.4. We propose that
these observations can be explained if the oxygen defects are on the O'
sublattice of the structure. The magnetic susceptibility versus temperature
exhibits Curie-Weiss behavior above 150 K for all x, with a Curie constant C
that increases with x as expected in an ionic model. However, the magnetization
measurements also show that the (ferromagnetic) Weiss temperature theta and the
ferromagnetic ordering temperature T_C both strongly decrease with increasing x
instead of increasing as expected from C(x). The T_C decreases from 73 K for x
= 0 to 21 K for x = 0.65. Furthermore, the saturation moment at a field of 5.5
T at 5 K is nearly independent of x, with the value expected for a fixed spin
1/2 per V. The latter three observations suggest that Lu2V2O_{7-x} may contain
localized spin 1/2 vanadium moments in a metallic background that is induced by
oxygen defect doping, instead of being a semiconductor as suggested by the C(x)
dependence.Comment: 9 pages including 7 figures, 3 table
- …