Normal background concentrations (NBCs) of contaminants in English soils : final project report

The British Geological Survey (BGS) has been commissioned by the Department for Environment, Food and Rural Affairs (Defra) to give guidance on what are normal levels of contaminants in English soils in support of the Part 2A Contaminated Land Statutory Guidance. This has initially been done by studying the distribution of four contaminants – arsenic, lead, benzo[a]pyrene (BaP) and asbestos – in topsoils from England. This work was extended to a further four contaminants (cadmium, copper, nickel and mercury) which enabled methodologies developed to be tested on a larger range of contaminants. The first phase of the Project gathered data sets that were: nationally extensive; systematically collected so a broad range of land uses were represented; and collected and analysed to demonstrably and acceptable levels of quality. Information on the soil contaminant concentrations in urban areas was of particular importance as the normal background is considered to be a combination of both natural and diffuse anthropogenic contributions to the soil. Issues of soil quality are most important in areas where these affect most people, namely, the urban environment. The two principal data sets used in this work are the BGS Geochemical Baseline Survey of the Environment (G-BASE) rural and urban topsoils (37,269 samples) and the English NSI (National Soil Inventory) topsoils (4,864 samples) reanalysed at the BGS laboratories by X-ray fluorescence spectrometry (XRFS) so both data sets were highly compatible. These two data sets provide results for most inorganic element contaminants, though results explored for mercury and BaP are drawn from a variety of different and much less extensive data sets

Group a streptococcal serotypes isolated from healthy schoolchildren in iran

Serotypes of group A streptococci are still a major cause of pharyngitis and some post-infectious sequelae such as rheumatic fever. As part of the worldwide effort to clarify the epidemiological pattern of group A streptococci in different countries, the present study was conducted to assess the prevalence of Streptococcus pyogenes serotypes in Iran. A total of 1588 throat swabs were taken from healthy school children in the city of Gorgan during February and March 1999. Of those isolates, 175 resulted positive for group A streptococci. The distribution pattern was similar for girls and boys, with 10.8 and 11.2, respectively. Urban school children showed a higher rate of colonization compared to those in rural areas. Serotyping was performed on 65 of the positive isolates using standard techniques, and only 21 (32) were M-type isolates. Their profiles fell into four types with M1 predominating, which could reflect the presence of rheumatic fever in the region. However, when isolates were challenged for T-antigen types, nearly all were positive (94). The pattern of T types was diverse (18 types), with the most common T types being T1 (26), TB3264 (15), TB\1-19 & B\25\1-19 (9.2) and T2 & 2\28 (7.7). When isolates were tested for opacity factor, only 23 (35) were positive while 34 (52) responded to the serum opacity reaction test. Although the number of isolates in this study was not sufficient to make any epidemiological conclusions, the scarcity of serotyping studies in Iran could render these data useful for future attempts to develop a streptococcal vaccine

GSUE: urban geochemical mapping in Great Britain

The British Geological Survey is responsible for the national strategic geochemical survey of Great Britain. As part of this programme, the Geochemical Surveys of Urban Environments (GSUE) project was initiated in 1992 and to date, 21 cities have been mapped. Urban sampling is based upon the collection of top (0.05 to 0.20 m) and deeper (0.35 to 0.50 m) soil samples on a 500 m grid across the built environment (1 sample per 0.25 km2). Samples are analysed for c. 46 total element concentrations by X-ray Fluorescence Spectrometry (XRFS), pH and loss on ignition (LOI) as an indicator of organic matter content. The data provide an overview of the urban geochemical signature and because they are collected as part of a national baseline programme, can be readily compared with soils in the rural hinterland to assess the extent of urban contamination. The data are of direct relevance to current UK land use planning, urban regeneration and contaminated land legislative regimes. An overview of the project and applications of the data to human health risk assessment, water quality protection and contaminant source identification are presented

Sources, mobility and bioaccessibility of potentially harmful elements in UK soils

Potentially harmful elements (PHE) occur both naturally from geogenic sources and from anthropogenic derived pollution. Anthropogenic sources can be further categorised into those derived from point sources. A point source is a single identifiable source which is confined to a very small area such as that arising from disposal of waste material or from an industrial plant. Diffuse pollution arises where substances are widely used and dispersed over an area as a result of land use activities, often associated with urban development. Examples of diffuse pollution include atmospheric deposition of contaminants arising from industry, domestic coal fires and traffic exhaust, and disposal of domestic coal ash. The total concentration and the chemical form and hence the mobility of the PHE in a soil is highly dependent on the source

A note on the knapsack problem with special ordered sets

summar

Investigating knitwear product development in small and medium enterprises: A report of practices related to environmental sustainability

There is rising interest into the inner workings of the fashion supply chain due to increasing concern surrounding environmental impact, social responsibility, and economic growth. Studies designed to understand the fashion industry often presume the knitwear sector to follow the linear product development process of the woven garment sector. However, knitwear practitioners are profoundly aware of many complex distinctions, one example being the ability to seamlessly create three dimensional garments with minimal finishing. In spite of these differences, there is little known research which specifically identifies the current knitwear design and manufacture system, or how often such seamless production methods are utilised. To bridge the gap in knowledge, a quantitative questionnaire was designed for a holistic overview of the key product development processes within knitwear small and medium enterprises (SMEs). The questionnaire had three focuses, design, manufacture, and retail, reflecting the sectors dynamism. 31 companies of varying sizes completed the survey, of these, 26 designed knitwear, 25 manufactured it, and 21 companies retailed directly to consumers. Results showed that the sampled SMEs have a keen interest in developing sustainable products, albeit at surface level, with most choosing to reduce impact through their material and fibre choices, with less importance placed on manufacturing processes. Other revelations included the low uptake of 3D garment simulation software, designed to reduce the need for multiple prototypes and the reliance on cut and sew processes. This study revealed several areas where environmental impact can be reduced and aims to inform future studies within the knitwear industry focused on material use, product life-cycle analysis, waste reduction and digital technology adoption