14,957 research outputs found
Ultra-Wideband Phased Arrays for Small Mobile Platforms
This dissertation presents the development of a new class of Ultra-Wideband (UWB) apertures for aerial applications by introducing designs with over 50:1 bandwidth and novel differential feeding approaches. Designs that enable vertical integration for flip-chip millimeter-wave (UWB) transceivers are presented for small aerial platforms. Specifically, a new scalable tightly coupled array is introduced with differential feeding for chip integration. This new class of beam-forming arrays are fabricated and experimentally tested for validation with operation from as low as 130 MHz up to 18 GHz. A major achievement is the study of millimeter wave beamforming designs that operate from 22-80 GHz, fabricated using low-cost printed circuit board (PCB) methods. This low-cost fabrication approach and associated testing of the beamforming arrays are unique and game-changing
Casimir forces in the time domain II: Applications
Our preceding paper introduced a method to compute Casimir forces in
arbitrary geometries and for arbitrary materials that was based on a
finite-difference time-domain (FDTD) scheme. In this manuscript, we focus on
the efficient implementation of our method for geometries of practical interest
and extend our previous proof-of-concept algorithm in one dimension to problems
in two and three dimensions, introducing a number of new optimizations. We
consider Casimir piston-like problems with nonmonotonic and monotonic force
dependence on sidewall separation, both for previously solved geometries to
validate our method and also for new geometries involving magnetic sidewalls
and/or cylindrical pistons. We include realistic dielectric materials to
calculate the force between suspended silicon waveguides or on a suspended
membrane with periodic grooves, also demonstrating the application of PML
absorbing boundaries and/or periodic boundaries. In addition we apply this
method to a realizable three-dimensional system in which a silica sphere is
stably suspended in a fluid above an indented metallic substrate. More
generally, the method allows off-the-shelf FDTD software, already supporting a
wide variety of materials (including dielectric, magnetic, and even anisotropic
materials) and boundary conditions, to be exploited for the Casimir problem.Comment: 11 pages, 12 figures. Includes additional examples (dispersive
materials and fully three-dimensional systems
Achieving a Strongly Temperature-Dependent Casimir Effect
We propose a method of achieving large temperature sensitivity in the Casimir
force that involves measuring the stable separation between dielectric objects
immersed in fluid. We study the Casimir force between slabs and spheres using
realistic material models, and find large > 2nm/K variations in their stable
separations (hundreds of nanometers) near room temperature. In addition, we
analyze the effects of Brownian motion on suspended objects, and show that the
average separation is also sensitive to changes in temperature . Finally, this
approach also leads to rich qualitative phenomena, such as irreversible
transitions, from suspension to stiction, as the temperature is varied
Structural anisotropy and orientation-induced Casimir repulsion in fluids
In this work we theoretically consider the Casimir force between two periodic
arrays of nanowires (both in vacuum, and on a substrate separated by a fluid)
at separations comparable to the period. Specifically, we compute the
dependence of the exact Casimir force between the arrays under both lateral
translations and rotations. Although typically the force between such
structures is well-characterized by the Proximity Force Approximation (PFA), we
find that in the present case the microstructure modulates the force in a way
qualitatively inconsistent with PFA. We find instead that effective-medium
theory, in which the slabs are treated as homogeneous, anisotropic dielectrics,
gives a surprisingly accurate picture of the force, down to separations of half
the period. This includes a situation for identical, fluid-separated slabs in
which the exact force changes sign with the orientation of the wire arrays,
whereas PFA predicts attraction. We discuss the possibility of detecting these
effects in experiments, concluding that this effect is strong enough to make
detection possible in the near future.Comment: 12 pages, 9, figure. Published version with expanded discussio
Structural anisotropy and orientation-induced Casimir repulsion in fluids
In this work we theoretically consider the Casimir force between two periodic
arrays of nanowires (both in vacuum, and on a substrate separated by a fluid)
at separations comparable to the period. Specifically, we compute the
dependence of the exact Casimir force between the arrays under both lateral
translations and rotations. Although typically the force between such
structures is well-characterized by the Proximity Force Approximation (PFA), we
find that in the present case the microstructure modulates the force in a way
qualitatively inconsistent with PFA. We find instead that effective-medium
theory, in which the slabs are treated as homogeneous, anisotropic dielectrics,
gives a surprisingly accurate picture of the force, down to separations of half
the period. This includes a situation for identical, fluid-separated slabs in
which the exact force changes sign with the orientation of the wire arrays,
whereas PFA predicts attraction. We discuss the possibility of detecting these
effects in experiments, concluding that this effect is strong enough to make
detection possible in the near future.Comment: 12 pages, 9, figure. Published version with expanded discussio
Effect Of Shock Tunnel Geometry On Shockwave And Vortex Ring Formation, Propagation, And Head On Collision
Vortex ring research primarily focuses on the formation from circular openings. Consequently, the role of tunnel geometry is less understood, despite there being numerous research studies using noncircular shock tunnels. This experimental study investigated shockwaves and vortex rings from different geometry shock tunnels from formation at the tunnel opening to head on collision with another similarly formed vortex ring using schlieren imaging and statistical analysis. The velocity of the incident shockwave was found to be consistent across all four shock tunnel geometries, which include circle, hexagon, square, and triangle of the same cross-sectional area. The velocity was 1.2 ± 0.007 Mach and was independent of the tunnel geometry. However, the velocities of the resulting vortex rings differed between the shapes, with statistical analysis indicating significant differences between the triangle and hexagon vortex velocities compared to the circle. Vortex rings from the square and circle shock tunnels were found to have statistically similar velocities. All vortex rings slowed as they traveled due to corner inversion and air drag. All shock tunnels with corners produce a wobble in the vortex rings. Vortex rings interact with opposing incident shockwaves prior to colliding with each other. Vortex velocity before and after shock-vortex interaction was measured and evaluated, showing statistically similar results. Shock-vortex interaction slows the shockwave upon interaction, while the shock-shock interaction resulted in no change in shock velocity. Although the vortex rings travel at different velocities, all head-on vortex ring collisions produce a perpendicular shockwave that travels at 1.04 ± 0.005 Mach
Electric field control of the magnetic chiralities in ferroaxial multiferroic RbFe(MoO4)2
The coupling of magnetic chiralities to the ferroelectric polarisation in
multiferroic RbFe(MoO) is investigated by neutron spherical
polarimetry. Because of the axiality of the crystal structure below
= 190 K, helicity and triangular chirality are
symmetric-exchange coupled, explaining the onset of the ferroelectricity in
this proper-screw magnetic structure - a mechanism that can be generalised to
other systems with "ferroaxial" distortions in the crystal structure. With an
applied electric field we demonstrate control of the chiralities in both
structural domains simultaneously.Comment: 5 pages, 4 figure
Gapless spin-liquid state in the structurally disorder-free triangular antiferromagnet NaYbO
We present the structural characterization and low-temperature magnetism of
the triangular-lattice delafossite NaYbO. Synchrotron x-ray diffraction and
neutron scattering exclude both structural disorder and crystal-electric-field
randomness, whereas heat-capacity measurements and muon spectroscopy reveal the
absence of magnetic order and persistent spin dynamics down to at least 70\,mK.
Continuous magnetic excitations with the low-energy spectral weight
accumulating at the -point of the Brillouin zone indicate the formation of a
novel spin-liquid phase in a triangular antiferromagnet. This phase is gapless
and shows a non-trivial evolution of the low-temperature specific heat. Our
work demonstrates that NaYbO practically gives the most direct experimental
access to the spin-liquid physics of triangular antiferromagnets.Comment: 6 pages, 4figure
A Near-Term Quantum Algorithm for Computing Molecular and Materials Properties based on Recursive Variational Series Methods
Determining properties of molecules and materials is one of the premier
applications of quantum computing. A major question in the field is: how might
we use imperfect near-term quantum computers to solve problems of practical
value? We propose a quantum algorithm to estimate properties of molecules using
near-term quantum devices. The method is a recursive variational series
estimation method, where we expand an operator of interest in terms of
Chebyshev polynomials, and evaluate each term in the expansion using a
variational quantum algorithm. We test our method by computing the one-particle
Green's function in energy domain and the autocorrelation function in time
domain.Comment: 16+10 pages, 3 figures; comments welcom
- …