Low noise cryogenic dielectric resonator oscillator

A microwave oscillator is provided which can operate at a temperature of many degrees above absolute zero while providing very low phase noise that has heretofore generally required temperatures within a few degrees K. The oscillator includes a ring-shaped resonant element of ruby (sapphire plus chromium) or iron sapphire crystal, lying adjacent to a resonator element of sapphire, so that the regenerator element lies directly in the magnetic field of the resonator element. The resonator element is substantially devoid of contact with electrically conductive material. Microwave energy of a pump frequency (e.g., 31 GHz) is outputted from the regenerator element, while signal energy (e.g., 10 GHz) is outputted from the resonator element

Ultra-stable superconducting cavity maser oscillator

An ultra-stable superconducting triple cavity ruby maser oscillator (10) is obtained by providing the oscillator with a superconducting quantum interference device (SQUID) (50), which measures the magnetic field at the ruby (14) and compensates for changes by adjusting the RF pump signal amplitude (42), thereby attaining stabilities of about four orders of magnitude greater than presently attainable

Opto-Electronic Oscillator Using Suppressed Phase Modulation

A proposed opto-electronic oscillator (OEO) would generate a microwave signal having degrees of frequency stability and spectral purity greater than those achieved in prior OEOs. The design of this system provides for reduction of noise levels (including the level of phase noise in the final output microwave signal) to below some of the fundamental limits of the prior OEOs while retaining the advantages of photonic generation of microwaves

Cryogenic Pound Circuits for Cryogenic Sapphire Oscillators

Two modern cryogenic variants of the Pound circuit have been devised to increase the frequency stability of microwave oscillators that include cryogenic sapphire-filled cavity resonators. The original Pound circuit is a microwave frequency discriminator that provides feedback to stabilize a voltage-controlled microwave oscillator with respect to an associated cavity resonator. In the present cryogenic Pound circuits, the active microwave devices are implemented by use of state-of-the-art commercially available tunnel diodes that exhibit low flicker noise (required for high frequency stability) and function well at low temperatures and at frequencies up to several tens of gigahertz. While tunnel diodes are inherently operable as amplitude detectors and amplitude modulators, they cannot, by themselves, induce significant phase modulation. Therefore, each of the present cryogenic Pound circuits includes passive circuitry that transforms the AM into the required PM. Each circuit also contains an AM detector that is used to sample the microwave signal at the input terminal of the high-Q resonator for the purpose of verifying the desired AM null at this point. Finally, each circuit contains a Pound signal detector that puts out a signal, at the modulation frequency, having an amplitude proportional to the frequency error in the input signal. High frequency stability is obtained by processing this output signal into feedback to a voltage-controlled oscillator to continuously correct the frequency error in the input signal

Method and apparatus for reducing microwave oscillator output noise

Microwave oscilltors incorporate r.f. feedback with carrier suppression to reduce phase noise. In a direct feedback oscillator arrngement a circulator is interposed between the r.f. amplifier and the high-Q resonator. The amplifier output is applied to the slightly over-coupled input port of the resonator so that the resultant net return signal is the vectorial difference between the signals emitted and reflected from the resonator. The gain of the r.f. amplifier is chosen to regenerate the forward signal from the net return signal. In a STALO-type arrangement, the resonator is critically coupled and an r.f. amplifier added to the path of the net return signal. The sensitivity of the STALO-type feedback loop is thereby enhanced while added amplifier noise is minimized by the superposition of the signals emitted by and reflected from the resonator

On the Reprocessing and Reanalysis of Observations for Climate

The long observational record is critical to our understanding of the Earth s climate, but most observing systems were not developed with a climate objective in mind. As a result, tremendous efforts have gone into assessing and reprocessing the data records to improve their usefulness in climate studies. Many challenges remain, such as tracking the improvement of processing algorithms and limited spatial coverage. Reanalyses have fostered significant research, yet reliable global trends in many physical fields are not yet attainable, despite significant advances in data assimilation and numerical modeling. Communication of the strengths, limitations and uncertainties of reprocessed observations and reanalysis data, not only among the community of developers, but also with the extended research community, including the new generations of researchers and the decision makers is crucial for further advancement of the observational data records. WCRP provides the means to bridge the different motivating objectives on which national efforts focus

Status of the Stony Brook Superconducting Heavy-Ion Linac

The present status of the Stony Brook Superconducting Heavy-Ion Linear Accelerator is described, with emphasis on recent operational results with a prototype unit of the accelerator. The basic LINAC elements are independently-phased lead-plated copper split-loop resonators operating at 151.7 MHz and optimized for velocities of either ß=v/c= 0.055 or ß=0.10. Resonators are grouped in units of either 4 low-ß or 3 high-ß resonators in compact cryostat modules separated by room-temperature quadrupole-doublet lenses. The LINAC consisting of 4 low-ß and 7 high-ß modules injected with heavy ions of mass A≃16-100 from the Stony Brook EN tandem will produce an additional energy gain of ~18 MeV per unit charge with a total heat dissipation at 4.5K of <300 Watts. In recent tests with low-ß prototype units, individual resonators were operated continuously at accelerating gradients in excess of 3.5 MV/m, and were phase and amplitude stabilized at 3.0 MV/ m using 175 Watts of RF power. Helium-temperature dissipation at 3.0 MV/m is ~8 Watts after helium-gas conditioning. The prototype low-ß module was used to accelerate a 30 Mev ^(16)O^(5+) beam to ~35 MeV

Early Contrast Enhancement: a novel Magnetic Resonance Imaging biomarker of pleural malignancy

Introduction: Pleural Malignancy (PM) is often occult on subjective radiological assessment. We sought to define a novel, semi-objective Magnetic Resonance Imaging (MRI) biomarker of PM, targeted to increased tumour microvessel density (MVD) and applicable to minimal pleural thickening. Materials and methods: 60 consecutive patients with suspected PM underwent contrast-enhanced 3-T MRI then pleural biopsy. In 58/60, parietal pleura signal intensity (SI) was measured in multiple regions of interest (ROI) at multiple time-points, generating ROI SI/time curves and Mean SI gradient (MSIG: SI increment/time). The diagnostic performance of Early Contrast Enhancement (ECE; which was defined as a SI peak in at least one ROI at or before 4.5 min) was compared with subjective MRI and Computed Tomography (CT) morphology results. MSIG was correlated against tumour MVD (based on Factor VIII immunostain) in 31 patients with Mesothelioma. Results: 71% (41/58) patients had PM. Pleural thickening was &#60;10 mm in 49/58 (84%). ECE sensitivity was 83% (95% CI 61–94%), specificity 83% (95% CI 68–91%), positive predictive value 68% (95% CI 47–84%), negative predictive value 92% (78–97%). ECE performance was similar or superior to subjective CT and MRI. MSIG correlated with MVD (r = 0.4258, p = .02). Discussion: ECE is a semi-objective, perfusion-based biomarker of PM, measurable in minimal pleural thickening. Further studies are warranted

Risk factors for heart failure in patients with type 2 diabetes mellitus and stage 4 chronic kidney disease treated with bardoxolone methyl

Background: A phase 3 randomized clinical trial was designed to test whether bardoxolone methyl, a nuclear factor erythroid-2–related factor 2 (Nrf2) activator, slows progression to end-stage renal disease in patients with stage 4 chronic kidney disease and type 2 diabetes mellitus. The trial was terminated because of an increase in heart failure in the bardoxolone methyl group; many of the events were clinically associated with fluid retention.&lt;p&gt;&lt;/p&gt; Methods and Results: We randomized 2,185 patients with type 2 diabetes mellitus (T2DM) and stage 4 chronic kidney disease (CKD) (estimated glomerular filtration rate 15 to &lt;30 mL min−1 1.73 m−2) to once-daily bardoxolone methyl (20 mg) or placebo. We used classification and regression tree analysis to identify baseline factors predictive of heart failure or fluid overload events. Elevated baseline B-type natriuretic peptide and previous hospitalization for heart failure were identified as predictors of heart failure events; bardoxolone methyl increased the risk of heart failure by 60% in patients with these risk factors. For patients without these baseline characteristics, the risk for heart failure events among bardoxolone methyl– and placebo-treated patients was similar (2%). The same risk factors were also identified as predictors of fluid overload and appeared to be related to other serious adverse events.&lt;p&gt;&lt;/p&gt; Conclusions: Bardoxolone methyl contributed to events related to heart failure and/or fluid overload in a subpopulation of susceptible patients with an increased risk for heart failure at baseline. Careful selection of participants and vigilant monitoring of the study drug will be required in any future trials of bardoxolone methyl to mitigate the risk of heart failure and other serious adverse events.&lt;p&gt;&lt;/p&gt

Determination of myocardial and serum digoxin concentrations in children by specific and nonspecific assay methods

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/109866/1/cptclpt198378.pd