Bifunctional earth-abundant phosphate/phosphide catalysts prepared via atomic layer deposition for electrocatalytic water splitting

The development of active and stable earth-abundant catalysts for hydrogen and oxygen evolution is one of the requirements for successful production of solar fuels. Atomic Layer Deposition (ALD) is a proven technique for conformal coating of structured (photo)electrode surfaces with such electrocatalyst materials. Here, we show that ALD can be used for the deposition of iron and cobalt phosphate electrocatalysts. A PE-ALD process was developed to obtain cobalt phosphate films without the need for a phosphidation step. The cobalt phosphate material acts as a bifunctional catalyst, able to also perform hydrogen evolution after either a thermal or electrochemical reduction step

Atomic Layer Deposition-Based Synthesis of Photoactive TiO2 Nanoparticle Chains by Using Carbon Nanotubes as Sacrificial Templates

Highly ordered and self supported anatase TiO2 nanoparticle chains were fabricated by calcining conformally TiO2 coated multi-walled carbon nanotubes (MWCNTs). During annealing, the thin tubular TiO2 coating that was deposited onto the MWCNTs by atomic layer deposition (ALD) was transformed into chains of TiO2 nanoparticles (~12 nm diameter) with an ultrahigh surface area (137 cm2 per cm2 of substrate), while at the same time the carbon from the MWCNTs was removed. Photocatalytic tests on the degradation of acetaldehyde proved that these forests of TiO2 nanoparticle chains are highly photo active under UV light because of their well crystallized anatase phase

Synthesis of a 3D network of Pt nanowires by atomic layer deposition on carbonaceous template

The formation of a 3D network composed of free standing and interconnected Pt nanowires is achieved by a two-step method, consisting of conformal deposition of Pt by atomic layer deposition (ALD) on a forest of carbon nanotubes and subsequent removal of the carbonaceous template. Detailed characterization of this novel 3D nanostructure was carried out by transmission electron microscopy (TEM) and electrochemical impedance spectroscopy (EIS). These characterizations showed that this pure 3D nanostructure of platinum is self-supported and offers an enhancement of the electrochemically active surface area by a factor of 50

Synthesis of Zeolitic-type Adsorbent Materials from Municipal Solid Waste Incinerator Bottom Ash and its Application in Heavy Metal Adsorption

Municipal solid waste incinerator (MSWI) bottom ash (BA) was converted to zeolitic-type adsorbent materials by hydrothermal conversion under strongly alkaline conditions. The conversion product was determined to be a mixture of sodium aluminum silicate hydrate (SASH) (Na2O·Al2O3·1.68SiO2·1.73H2O) and tobermorite (Ca5Si6O16(OH)2·4H2O). The BET specific surface area was 22.1 m2/g, which represented a significant gain compared to the BA (4.6 m2/g) due to the formation of micropores and mesopores. The converted BA demonstrated promising performance for application as a sorbent towards several heavy metals (oxyanions of As(V), and Cd2+, Co2+, Ni2+, Pb2+, and Zn2+). Its performance was found to be generally superior to that of a mainly-clinoptilolite natural zeolite, achieving greater sorption extents and better stabilizing capability of contaminated sediments. At a lower dosage rate (50 mg sorbent per gram sediment) to that of natural zeolite, converted BA achieved greater than 80% reduction of cationic heavy metal concentrations in sediment porewater. These results suggest a promising route for reutilization of MSWI-BA, which can greatly enhance the sustainability of waste incineration technology

Towards Zero-waste Mineral Carbon Sequestration Via Two-way Valorization of Ironmaking Slag

A three-stage process was developed to transform blast furnace slag (BFS) into two valuable products: precipitated calcium carbonate (PCC) and zeolitic materials. The conceptualized process aims to simultaneously achieve sustainable CO2 sequestration and solid waste elimination. Calcium is first selectively extracted by leaching with an organic acid, followed by carbonation of the leachate to precipitate CaCO3. In parallel, the hydrothermal conversion of the extracted solid residues in alkali solution induces the dissolution/precipitation mechanism that leads to the formation of micro- and meso-porous zeolitic materials. Leaching selectivity was identified as a key factor in the valorization potential of both products. Acetic acid satisfactorily limited the leaching of aluminium, required for the subsequent synthesis of zeolites, and carbonation of the acetic acid leachate resulted in the production of PCC of varied mineralogy and morphology, depending on processing conditions. In the hydrothermal conversion stage, the formation of zeolitic phases was observed, and their characteristics were found to vary depending on the calcium extraction efficiency in the previous stage, and the alkali (NaOH) concentration. The zeolitic phases produced, in order of increasing valorization potential, were: tobermorite, sodalite, lazurite, and analcime

Adsorption of Multi-heavy Metals Onto Water Treatment Residuals: Sorption Capacities and Applications

Inherently formed iron-based water treatment residuals (WTRs) were tested as alternative sorbents for multi-heavy metal removal from synthetic solutions, contaminated sediments, and surface waters. The WTRs were mainly composed of iron (hydr)oxides and had a high BET surface area (170.7 m2/g), due to the presence of micro- and mesopores. The sorption capacity of WTRs for As(V), Cd2+, Pb2+ and Zn2+ from synthetic solutions surpassed that of a commercially available goethite by 100-400% for single contaminant tests, and by 240% for total sorption in multi contaminant tests. The maximum sorption capacity of WTRs towards As(V), Pb2+ and Zn2+ was estimated by Langmuir equation fitting to range between 0.5 to 0.6 mmol/g, and their maximum sorption capacity for Cd was 0.19 mmol/g. WTRs performed significantly better than goethite for adsorption of cationic contaminants (Cd, Co, Ni, Pb, Zn) in the sediment tests, independent of the dosage or sediment sample. At the highest WTRs dosage (250 mg/g), concentrations of the cationic contaminants decreased by at least 80%, while approximately 40% removal was obtained with 50 mg/g dosage. Sorbent mixtures composed of WTRs with goethite, and with a clinoptilolite natural zeolite were used to reduce As leaching. The sorbent mixtures delivered the desired performance, with the natural zeolite performing better than the goethite as an amendment to WTRs. In addition, up to 90% removal of surface water contaminants was achieved with both fresh WTRs and the WTRs regenerated using 0.01 M EDTA