Ferroelectric properties of PZT/BFO multilayer thin films prepared using the sol-gel method

In this study, Pb(Zr0.52Ti0.48)O3/BiFeO3 [PZT/BFO] multilayer thin films were fabricated using the spin-coating method on a Pt(200 nm)/Ti(10 nm)/SiO2(100 nm)/p-Si(100) substrate alternately using BFO and PZT metal alkoxide solutions. The coating-and-heating procedure was repeated several times to form the multilayer thin films. All PZT/BFO multilayer thin films show a void-free, uniform grain structure without the presence of rosette structures. The relative dielectric constant and dielectric loss of the six-coated PZT/BFO [PZT/BFO-6] thin film were approximately 405 and 0.03%, respectively. As the number of coatings increased, the remanent polarization and coercive field increased. The values for the BFO-6 multilayer thin film were 41.3 C/cm2 and 15.1 MV/cm, respectively. The leakage current density of the BFO-6 multilayer thin film at 5 V was 2.52 × 10-7 A/cm2

Thiazolidinediones Regulate Adipose Lineage Dynamics

SummaryWhite adipose tissue regulates metabolism; the importance of this control is highlighted by the ongoing pandemic of obesity and associated complications such as diabetes, atherosclerosis, and cancer. White adipose tissue maintenance is a dynamic process, yet very little is known about how pharmacologic stimuli affect such plasticity. Combining in vivo lineage marking and BrdU labeling strategies, we found that rosiglitazone, a member of the thiazolidinedione class of glucose-lowering medicines, markedly increases the evolution of adipose progenitors into adipocytes. Notably, chronic rosiglitazone administration disrupts the adipogenic and self-renewal capacities of the stem cell compartment and alters its molecular characteristics. These data unravel unknown aspects of adipose dynamics and provide a basis to manipulate the adipose lineage for therapeutic ends

The dynamic development of germ cells during chicken embryogenesis

ArticlePoultry Science. 97(2): 650-657. (2018)journal articl

Solution-processed CdS transistors with high electron mobility

Solution-processed CdS field effect transistors (FETs) and solar cells are demonstrated via spin-coating and thermal annealing of soluble cadmium thiolate compounds. The synthesis is carried out in one simple step using cadmium oxide and tertiary alkane thiols. The cadmium thiolates are soluble in organic solvents such as chloroform and may be spin-coated, like organic semiconductors, to form thin films. The cadmium thiolate films decompose rapidly at 300 ??C to yield semiconducting cadmium sulfide films. FETs are easily fabricated using these films and exhibit electron mobilities of up to 61 cm2 V -1 s-1, which compare favourably to FETs prepared from other solution-processed materials such as organic semiconductors, inorganic nanoparticles or chalcogenide films. Initial attempts to prepare hybrid bilayer solar cells were successfully realized by spin-coating a p-type semiconducting polymer layer on top of the n-type CdS film. These devices show significant photocurrent response from both the CdS and polymer layers, indicating that the CdS films are able to participate in photo-induced electron transfer from the polymer to the CdS layer as well as photo-induced hole transfer from CdS to the polymer layer.close2

Perceptual difference between the discomfort luminance level and the brightness of a head-mounted display (HMD)

A psychophysical experiment was conducted to compare the discomfort luminance level and the brightness of a head-mounted display (HMD). The results showed that as the size of the HMD stimulus increased, both the discomfort luminance level of the HMD and the brightness of the HMD decreased, but the influence of the size change was more dramatic on the discomfort luminance level than on the brightness. This study showed that to provide a comfortable luminance level for HMDs, the adaptation luminance level and the size of the HMD stimulus should be considered. However, it cannot be predicted in terms of brightness

Effects of Infrared Radiation and Heat on Human Skin Aging in vivo

Sunlight damages human skin, resulting in a wrinkled appearance. Since natural sunlight is polychromatic, its ultimate effects on the human skin are the result of not only the action of each wavelength separately, but also interactions among the many wavelengths, including UV, visible light, and infrared (IR). In direct sunlight, the temperature of human skin rises to about 40°C following the conversion of absorbed IR into heat. So far, our knowledge of the effects of IR radiation or heat on skin aging is limited. Recent work demonstrates that IR and heat exposure each induces cutaneous angiogenesis and inflammatory cellular infiltration, disrupts the dermal extracellular matrix by inducing matrix metalloproteinases, and alters dermal structural proteins, thereby adding to premature skin aging. This review provides a summary of current research on the effects of IR radiation and heat on aging in human skin in vivo

High mobility solution-processed hybrid light emitting transistors

We report the design, fabrication, and characterization of high-performance, solution-processed hybrid (inorganic-organic) light emitting transistors (HLETs). The devices employ a high-mobility, solution-processed cadmium sulfide layer as the switching and transport layer, with a conjugated polymer Super Yellow as an emissive material in non-planar source/drain transistor geometry. We demonstrate HLETs with electron mobilities of up to 19.5 cm2/V s, current on/off ratios of >107, and external quantum efficiency of 10-2% at 2100 cd/m2. These combined optical and electrical performance exceed those reported to date for HLETs. Furthermore, we provide full analysis of charge injection, charge transport, and recombination mechanism of the HLETs. The high brightness coupled with a high on/off ratio and low-cost solution processing makes this type of hybrid device attractive from a manufacturing perspective.open0

Heterogeneous nuclear ribonucleoprotein A1 post-transcriptionally regulates Drp1 expression in neuroblastoma cells.

Excessive mitochondrial fission is associated with the pathogenesis of neurodegenerative diseases. Dynamin-related protein 1 (Drp1) possesses specific fission activity in the mitochondria and peroxisomes. Various post-translational modifications of Drp1 are known to modulate complex mitochondrial dynamics. However, the post-transcriptional regulation of Drp1 remains poorly understood. Here, we show that the heterogeneous nuclear ribonucleoprotein A1 (hnRNP A1) regulates Drp1 expression at the post-transcriptional level. hnRNP A1 directly interacts with Drp1 mRNA at its 3'UTR region, and enhances translation potential without affecting mRNA stability. Down-regulation of hnRNP A1 induces mitochondrial elongation by reducing Drp1 expression. Moreover, depletion of hnRNP A1 suppresses 3-NP-mediated mitochondrial fission and dysfunction. In contrast, over-expression of hnRNP A1 promotes mitochondrial fragmentation by increasing Drp1 expression. Additionally, hnRNP A1 significantly exacerbates 3-NP-induced mitochondrial dysfunction and cell death in neuroblastoma cells. Interestingly, treatment with 3-NP induces subcellular translocation of hnRNP A1 from the nucleus to the cytoplasm, which accelerates the increase in Drp1 expression in hnRNP A1 over-expressing cells. Collectively, our findings suggest that hnRNP A1 controls mitochondrial dynamics by post-transcriptional regulation of Drp1.This research was supported by a grant of the Korea–UK Collaborative Alzheimer's Disease Research Project by Ministry of Health & Welfare, Republic of Korea (A120196, HI14C1913) and was supported by the Basic Science Research Program of the National Research Foundation, Republic of Korea (2014R1A2A1A11053431). We are grateful to Wellcome Trust, Principal Research Fellowship to DCR (095317/Z/11/Z)This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.bbagrm.2015.10.01