5 research outputs found

    Comparison of the activities of C2N and BCNO towards Congo red degradation

    Get PDF
    An n-type organic carbon nitride semiconductor, C2N, was synthesized by the pyrolysis of uric acid, and its properties were investigated by scanning electron and transmission electron microscopies, X-ray powder diffraction, and vibrational, UV-visible and X-ray photoelectron spectroscopies. This novel material, composed of crystalline flakes, featured a broad absorption centered at 700¿nm, possibly due to charge transfer, and a 2.49¿eV band gap. Its catalytic performance was assessed for the treatment of effluents with the diazo dye Congo red, comparing it with that of boron carbon nitrogen oxide, BCNO. Both wide band gap semiconductors exhibited decolorizing activity in the dark, although the mechanisms were different and were not photocatalytic: BCNO was more effective towards the adsorption-coordination due to the presence of B-O, while C2N was effective towards the adsorption and the advancement of the oxidation reaction. Their kinetic constants (0.19 and 0.02 min-1 for BCNO and C2N, respectively) were comparable to those of intermetallic compounds studied for azo dyes degradation in dark conditions. In view of the high color removal efficiency (97% after 20¿min) and good reusability of BCNO, this study suggests a potential application of this catalyst for wastewater treatment, alone or in combination with C2N

    Identification of Active Species in Photodegradation of Aqueous Imidacloprid over g-C<sub>3</sub>N<sub>4</sub>/TiO<sub>2</sub> Nanocomposites

    No full text
    In this work, g-C3N4/TiO2 composites were fabricated through a hydrothermal method for the efficient photocatalytic degradation of imidacloprid (IMI) pesticide. The composites were fabricated at varying loading of sonochemically exfoliated g-C3N4 (denoted as CNS). Complementary characterization results indicate that the heterojunction between the CNS and TiO2 formed. Among the composites, the 0.5CNS/TiO2 material gave the highest photocatalytic activity (93% IMI removal efficiency) under UV-Vis light irradiation, which was 2.2 times over the pristine g-C3N4. The high photocatalytic activity of the g-C3N4/TiO2 composites could be ascribed to the band gap energy reduction and suppression of photo-induced charge carrier recombination on both TiO2 and CNS surfaces. In addition, it was found that the active species involved in the photodegradation process are OH• and holes, and a possible mechanism was proposed. The g-C3N4/TiO2 photocatalysts exhibited stable photocatalytic performance after regeneration, which shows that g-C3N4/TiO2 is a promising material for the photodegradation of imidacloprid pesticide in wastewater

    Fabrication of Hydrotalcite-like Copper Hydroxyl Salts as a Photocatalyst and Adsorbent for Hexavalent Chromium Removal

    No full text
    Cu-HyS-urea and Cu-HyS-NaOH, which are hydrotalcite-like copper hydroxyl salts, were prepared by two different methods, urea hydrolysis and precipitation, respectively. Both synthesis methods provided the successful formation of a copper hydroxyl salt, Cu2(OH)3NO3. From XRD and UV-DRS results, the product from the urea hydrolysis methods (Cu-HyS-urea) displayed higher crystallinity, small bandgap energy (Eg), and high light absorption ability because of some intercalated carbonate anions. For the Cr(VI) removal test, the Cu-HyS-NaOH showed superior adsorption of Cr(VI) than Cu-HyS-urea due to a higher specific surface area, confirmed by BET analysis. However, the Cu-HyS-urea presented higher photocatalytic Cr(VI) reduction under light irradiation than Cu-HyS-NaOH, owing to narrow Eg, less recombination, and a high transfer of the photogenerated charge carriers, proven by the results from photoluminescence, photocurrent density, and electrochemical impedance spectroscopy. Thus, this work provides a new function of the hydrotalcite-like copper hydroxyl salts (Cu-HyS-urea and Cu-HyS-NaOH) that can be utilized not only for adsorption of Cr(VI) but also as photocatalysts for Cr(VI) reduction under light irradiation

    Fabrication of Hydrotalcite-like Copper Hydroxyl Salts as a Photocatalyst and Adsorbent for Hexavalent Chromium Removal

    No full text
    Cu-HyS-urea and Cu-HyS-NaOH, which are hydrotalcite-like copper hydroxyl salts, were prepared by two different methods, urea hydrolysis and precipitation, respectively. Both synthesis methods provided the successful formation of a copper hydroxyl salt, Cu2(OH)3NO3. From XRD and UV-DRS results, the product from the urea hydrolysis methods (Cu-HyS-urea) displayed higher crystallinity, small bandgap energy (Eg), and high light absorption ability because of some intercalated carbonate anions. For the Cr(VI) removal test, the Cu-HyS-NaOH showed superior adsorption of Cr(VI) than Cu-HyS-urea due to a higher specific surface area, confirmed by BET analysis. However, the Cu-HyS-urea presented higher photocatalytic Cr(VI) reduction under light irradiation than Cu-HyS-NaOH, owing to narrow Eg, less recombination, and a high transfer of the photogenerated charge carriers, proven by the results from photoluminescence, photocurrent density, and electrochemical impedance spectroscopy. Thus, this work provides a new function of the hydrotalcite-like copper hydroxyl salts (Cu-HyS-urea and Cu-HyS-NaOH) that can be utilized not only for adsorption of Cr(VI) but also as photocatalysts for Cr(VI) reduction under light irradiation
    corecore